mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
7001ea3ec4
Update the current uDPU defconfig with following changes: * Disable CONFIG_SPI_BOOT, its not needed for booting and the device boots from eMMC anyway. * Disable CONFIG_SYS_CONSOLE_INFO_QUIET, there is no need to diverge from other boards by not priting the console device * Enable CONFIG_CMD_MTD in order to allow use of the MTD tool * Disable CONFIG_CMD_MTDPARTS, with MTD now being able to parse partitions from DTS there is no need for it, the default MTDPARTS were incorrect anyway * Enable CONFIG_MMC_HS200_SUPPORT, the eMMC used support both HS200 and HS400 modes, so enable at least HS200 because Xenon driver does not support HS400 currently * Replace CONFIG_SPI_FLASH_BAR with CONFIG_SPI_FLASH_SFDP_SUPPORT Utilize SFDP parsing instead of relying on the extended address registers Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
97 lines
2.2 KiB
Text
97 lines
2.2 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_MVEBU=y
|
|
CONFIG_SYS_TEXT_BASE=0x00000000
|
|
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
|
|
CONFIG_MVEBU_EFUSE=y
|
|
CONFIG_ENV_SIZE=0x10000
|
|
CONFIG_ENV_OFFSET=0x180000
|
|
CONFIG_ENV_SECT_SIZE=0x10000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
|
|
CONFIG_DEBUG_UART_BASE=0xd0012000
|
|
CONFIG_SYS_LOAD_ADDR=0x6000000
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_AHCI=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_USE_PREBOOT=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
# CONFIG_DISPLAY_BOARDINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_ARCH_EARLY_INIT_R=y
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_SYS_PROMPT="uDPU>> "
|
|
# CONFIG_CMD_ELF is not set
|
|
# CONFIG_CMD_IMI is not set
|
|
# CONFIG_CMD_XIMG is not set
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_FUSE=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_TFTPPUT=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_MVEBU_BUBT=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_MAC_PARTITION=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ARP_TIMEOUT=200
|
|
CONFIG_NET_RETRY_COUNT=50
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_AHCI_MVEBU=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_MVEBU=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_I2C_GPIO=y
|
|
CONFIG_SYS_I2C_MV=y
|
|
CONFIG_MISC=y
|
|
CONFIG_MMC_HS200_SUPPORT=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_SDMA=y
|
|
CONFIG_MMC_SDHCI_XENON=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
|
CONFIG_SPI_FLASH_MTD=y
|
|
CONFIG_PHYLIB_10G=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_PHY_GIGE=y
|
|
CONFIG_E1000=y
|
|
CONFIG_MVNETA=y
|
|
CONFIG_PCI=y
|
|
CONFIG_PCI_AARDVARK=y
|
|
CONFIG_PHY=y
|
|
CONFIG_MVEBU_COMPHY_SUPPORT=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_ARMADA_37XX=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_MVEBU_A3700_UART=y
|
|
CONFIG_MVEBU_A3700_SPI=y
|
|
CONFIG_SYSINFO=y
|
|
CONFIG_SYSINFO_SMBIOS=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_LZO=y
|
|
CONFIG_SPL_LZO=y
|