u-boot/configs/phycore_am62x_a53_defconfig
Wadim Egorov 085cd6459d board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
Add basic support for PHYTEC phyCORE-AM62x SoM.

Supported features:
  - 2GB DDR4 RAM
  - eMMC Flash
  - OSPI NOR Flash
  - external uSD
  - Ethernet
  - debug UART

Product page SoM: https://www.phytec.com/product/phycore-am62x

Device trees were taken from Linux v6.7-rc3.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
2024-01-16 12:00:05 -05:00

115 lines
3.1 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_K3=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SOC_K3_AM625=y
CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
CONFIG_TARGET_PHYCORE_AM62X_A53=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am625-phyboard-lyra-rdk"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_SIZE_LIMIT=0x40000
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTSTD_FULL=y
CONFIG_BOOTSTD_DEFAULTS=y
CONFIG_SYS_BOOTM_LEN=0x800000
CONFIG_BOOTCOMMAND="run mmcboot; bootflow scan -lb"
CONFIG_DEFAULT_FDT_FILE="oftree"
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x80c80000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_DOMAIN=y
# CONFIG_SPL_SPI_FLASH_TINY is not set
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_MMC=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
CONFIG_SPI_FLASH_SOFT_RESET=y
CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_S28HX_T=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_MT35XU=y
CONFIG_PHY_TI_DP83867=y
CONFIG_PHY_FIXED=y
CONFIG_TI_AM65_CPSW_NUSS=y
CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_POWER_DOMAIN=y
CONFIG_TI_SCI_POWER_DOMAIN=y
CONFIG_K3_SYSTEM_CONTROLLER=y
CONFIG_REMOTEPROC_TI_K3_ARM64=y
CONFIG_RESET_TI_SCI=y
CONFIG_DM_SERIAL=y
CONFIG_SOC_DEVICE=y
CONFIG_SOC_DEVICE_TI_K3=y
CONFIG_SOC_TI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_TI_SCI=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384