u-boot/configs/mscc_serval_defconfig
Patrick Delaunay b0cc1b846f dm: spi: Read default speed and mode values from DT
This patch update the behavior introduced by
commit 96907c0fe5 ("dm: spi: Read default speed and mode values from DT")

In case of DT boot, don't read default speed and mode for SPI from
CONFIG_* but instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies and SPI modes.

Remove also use in boards of the value speed=0 (no more supported)
for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0.

DT values will be always used when available (full DM support of
SPI slave with available DT node) even if speed and mode are requested;
for example in splash screen support (in splash_sf_read_raw)
or in SPL boot (in spl_spi_load_image).
The caller of spi_get_bus_and_cs() no more need to force speed=0.

But the current behavior don't change if the SPI slave is not
present (device with generic driver is created automatically)
or if platdata is used (CONFIG_OF_PLATDATA).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 11:54:50 +05:30

60 lines
1.5 KiB
Text

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x40000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ARCH_MSCC=y
CONFIG_SOC_SERVAL=y
CONFIG_DDRTYPE_H5TQ1G63BFA=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="serval # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)"
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="serval_pcb106"
CONFIG_OF_LIST="serval_pcb106 serval_pcb105"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_DM_GPIO=y
CONFIG_MSCC_SGPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_LZMA=y