u-boot/board/renesas/koelsch/koelsch.c
Nobuhiro Iwamatsu 9f861f0ae2 arm: koelsch: Disable TMU0 before OS boot
On U-boot uses TMU0 as timer, but TMU0 does not use on linux kernel
and other.
This disables TMU0 at the request of from kernel user.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-16 08:07:20 +09:00

372 lines
9.1 KiB
C

/*
* board/renesas/koelsch/koelsch.c
*
* Copyright (C) 2013 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*
*/
#include <common.h>
#include <malloc.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
#include "qos.h"
DECLARE_GLOBAL_DATA_PTR;
#define s_init_wait(cnt) \
({ \
u32 i = 0x10000 * cnt; \
while (i > 0) \
i--; \
})
#define dbpdrgd_check(bsc) \
({ \
while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \
; \
})
#if defined(CONFIG_NORFLASH)
static void bsc_init(void)
{
struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE;
struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE;
/* LBSC */
writel(0x00000020, &lbsc->cs0ctrl);
writel(0x00000020, &lbsc->cs1ctrl);
writel(0x00002020, &lbsc->ecs0ctrl);
writel(0x00002020, &lbsc->ecs1ctrl);
writel(0x077F077F, &lbsc->cswcr0);
writel(0x077F077F, &lbsc->cswcr1);
writel(0x077F077F, &lbsc->ecswcr0);
writel(0x077F077F, &lbsc->ecswcr1);
/* DBSC3 */
s_init_wait(10);
writel(0x0000A55A, &dbsc3_0->dbpdlck);
writel(0x00000001, &dbsc3_0->dbpdrga);
writel(0x80000000, &dbsc3_0->dbpdrgd);
writel(0x00000004, &dbsc3_0->dbpdrga);
dbpdrgd_check(dbsc3_0);
writel(0x00000006, &dbsc3_0->dbpdrga);
writel(0x0001C000, &dbsc3_0->dbpdrgd);
writel(0x00000023, &dbsc3_0->dbpdrga);
writel(0x00FD2480, &dbsc3_0->dbpdrgd);
writel(0x00000010, &dbsc3_0->dbpdrga);
writel(0xF004649B, &dbsc3_0->dbpdrgd);
writel(0x0000000F, &dbsc3_0->dbpdrga);
writel(0x00181EE4, &dbsc3_0->dbpdrgd);
writel(0x0000000E, &dbsc3_0->dbpdrga);
writel(0x33C03812, &dbsc3_0->dbpdrgd);
writel(0x00000003, &dbsc3_0->dbpdrga);
writel(0x0300C481, &dbsc3_0->dbpdrgd);
writel(0x00000007, &dbsc3_0->dbkind);
writel(0x10030A02, &dbsc3_0->dbconf0);
writel(0x00000001, &dbsc3_0->dbphytype);
writel(0x00000000, &dbsc3_0->dbbl);
writel(0x0000000B, &dbsc3_0->dbtr0);
writel(0x00000008, &dbsc3_0->dbtr1);
writel(0x00000000, &dbsc3_0->dbtr2);
writel(0x0000000B, &dbsc3_0->dbtr3);
writel(0x000C000B, &dbsc3_0->dbtr4);
writel(0x00000027, &dbsc3_0->dbtr5);
writel(0x0000001C, &dbsc3_0->dbtr6);
writel(0x00000005, &dbsc3_0->dbtr7);
writel(0x00000018, &dbsc3_0->dbtr8);
writel(0x00000008, &dbsc3_0->dbtr9);
writel(0x0000000C, &dbsc3_0->dbtr10);
writel(0x00000009, &dbsc3_0->dbtr11);
writel(0x00000012, &dbsc3_0->dbtr12);
writel(0x000000D0, &dbsc3_0->dbtr13);
writel(0x00140005, &dbsc3_0->dbtr14);
writel(0x00050004, &dbsc3_0->dbtr15);
writel(0x70233005, &dbsc3_0->dbtr16);
writel(0x000C0000, &dbsc3_0->dbtr17);
writel(0x00000300, &dbsc3_0->dbtr18);
writel(0x00000040, &dbsc3_0->dbtr19);
writel(0x00000001, &dbsc3_0->dbrnk0);
writel(0x00020001, &dbsc3_0->dbadj0);
writel(0x20082008, &dbsc3_0->dbadj2);
writel(0x00020002, &dbsc3_0->dbwt0cnf0);
writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
writel(0x00000015, &dbsc3_0->dbpdrga);
writel(0x00000D70, &dbsc3_0->dbpdrgd);
writel(0x00000016, &dbsc3_0->dbpdrga);
writel(0x00000006, &dbsc3_0->dbpdrgd);
writel(0x00000017, &dbsc3_0->dbpdrga);
writel(0x00000018, &dbsc3_0->dbpdrgd);
writel(0x00000012, &dbsc3_0->dbpdrga);
writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
writel(0x00000013, &dbsc3_0->dbpdrga);
writel(0x1A868300, &dbsc3_0->dbpdrgd);
writel(0x00000023, &dbsc3_0->dbpdrga);
writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
writel(0x00000014, &dbsc3_0->dbpdrga);
writel(0x300214D8, &dbsc3_0->dbpdrgd);
writel(0x0000001A, &dbsc3_0->dbpdrga);
writel(0x930035C7, &dbsc3_0->dbpdrgd);
writel(0x00000060, &dbsc3_0->dbpdrga);
writel(0x330657B2, &dbsc3_0->dbpdrgd);
writel(0x00000011, &dbsc3_0->dbpdrga);
writel(0x1000040B, &dbsc3_0->dbpdrgd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x00000001, &dbsc3_0->dbpdrga);
writel(0x00000071, &dbsc3_0->dbpdrgd);
writel(0x00000004, &dbsc3_0->dbpdrga);
dbpdrgd_check(dbsc3_0);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x2100FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x0000FA00, &dbsc3_0->dbcmd);
writel(0x110000DB, &dbsc3_0->dbcmd);
writel(0x00000001, &dbsc3_0->dbpdrga);
writel(0x00000181, &dbsc3_0->dbpdrgd);
writel(0x00000004, &dbsc3_0->dbpdrga);
dbpdrgd_check(dbsc3_0);
writel(0x00000001, &dbsc3_0->dbpdrga);
writel(0x0000FE01, &dbsc3_0->dbpdrgd);
writel(0x00000004, &dbsc3_0->dbpdrga);
dbpdrgd_check(dbsc3_0);
writel(0x00000000, &dbsc3_0->dbbs0cnt1);
writel(0x01004C20, &dbsc3_0->dbcalcnf);
writel(0x014000AA, &dbsc3_0->dbcaltr);
writel(0x00000140, &dbsc3_0->dbrfcnf0);
writel(0x00081860, &dbsc3_0->dbrfcnf1);
writel(0x00010000, &dbsc3_0->dbrfcnf2);
writel(0x00000001, &dbsc3_0->dbrfen);
writel(0x00000001, &dbsc3_0->dbacen);
}
#else
#define bsc_init() do {} while (0)
#endif /* CONFIG_NORFLASH */
void s_init(void)
{
struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE;
struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
/* QoS */
qos_init();
/* BSC */
bsc_init();
}
#define MSTPSR1 0xE6150038
#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
#define MSTPSR7 0xE61501C4
#define SMSTPCR7 0xE615014C
#define SCIF0_MSTP721 (1 << 21)
#define MSTPSR8 0xE61509A0
#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
#define PMMR 0xE6060000
#define GPSR4 0xE6060014
#define IPSR14 0xE6060058
#define set_guard_reg(addr, mask, value) \
{ \
u32 val; \
val = (readl(addr) & ~(mask)) | (value); \
writel(~val, PMMR); \
writel(val, addr); \
}
#define mstp_setbits(type, addr, saddr, set) \
out_##type((saddr), in_##type(addr) | (set))
#define mstp_clrbits(type, addr, saddr, clear) \
out_##type((saddr), in_##type(addr) & ~(clear))
#define mstp_setbits_le32(addr, saddr, set) \
mstp_setbits(le32, addr, saddr, set)
#define mstp_clrbits_le32(addr, saddr, clear) \
mstp_clrbits(le32, addr, saddr, clear)
int board_early_init_f(void)
{
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
#if defined(CONFIG_NORFLASH)
/* SCIF0 */
set_guard_reg(GPSR4, 0x34000000, 0x00000000);
set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
set_guard_reg(GPSR4, 0x00000000, 0x34000000);
#endif
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
/* ETHER */
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
return 0;
}
void arch_preboot_os(void)
{
/* Disable TMU0 */
mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
}
/* LSI pin pull-up control */
#define PUPR5 0xe6060114
#define PUPR5_ETH 0x3FFC0000
#define PUPR5_ETH_MAGIC (1 << 27)
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7791_pinmux_init();
/* ETHER Enable */
gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
gpio_request(GPIO_FN_ETH_RX_ER, NULL);
gpio_request(GPIO_FN_ETH_RXD0, NULL);
gpio_request(GPIO_FN_ETH_RXD1, NULL);
gpio_request(GPIO_FN_ETH_LINK, NULL);
gpio_request(GPIO_FN_ETH_REFCLK, NULL);
gpio_request(GPIO_FN_ETH_MDIO, NULL);
gpio_request(GPIO_FN_ETH_TXD1, NULL);
gpio_request(GPIO_FN_ETH_TX_EN, NULL);
gpio_request(GPIO_FN_ETH_TXD0, NULL);
gpio_request(GPIO_FN_ETH_MDC, NULL);
gpio_request(GPIO_FN_IRQ0, NULL);
mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC);
gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */
mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC);
gpio_direction_output(GPIO_GP_5_22, 0);
mdelay(20);
gpio_set_value(GPIO_GP_5_22, 1);
udelay(1);
return 0;
}
#define CXR24 0xEE7003C0 /* MAC address high register */
#define CXR25 0xEE7003C8 /* MAC address low register */
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SH_ETHER
int ret = -ENODEV;
u32 val;
unsigned char enetaddr[6];
ret = sh_eth_initialize(bis);
if (!eth_getenv_enetaddr("ethaddr", enetaddr))
return ret;
/* Set Mac address */
val = enetaddr[0] << 24 | enetaddr[1] << 16 |
enetaddr[2] << 8 | enetaddr[3];
writel(val, CXR24);
val = enetaddr[4] << 8 | enetaddr[5];
writel(val, CXR25);
return ret;
#else
return 0;
#endif
}
int dram_init(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
/* koelsch has KSZ8041NL/RNL */
#define PHY_CONTROL1 0x1E
#define PHY_LED_MODE 0xC0000
#define PHY_LED_MODE_ACK 0x4000
int board_phy_config(struct phy_device *phydev)
{
int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1);
ret &= ~PHY_LED_MODE;
ret |= PHY_LED_MODE_ACK;
ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret);
return 0;
}
const struct rmobile_sysinfo sysinfo = {
CONFIG_RMOBILE_BOARD_STRING
};
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE;
gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE;
}
int board_late_init(void)
{
return 0;
}
void reset_cpu(ulong addr)
{
u8 val;
i2c_set_bus_num(2); /* PowerIC connected to ch2 */
i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
}