mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
141 lines
3.9 KiB
C
141 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* cm_t43.h
|
|
*
|
|
* Copyright (C) 2015 Compulab, Ltd.
|
|
*/
|
|
|
|
#ifndef __CONFIG_CM_T43_H
|
|
#define __CONFIG_CM_T43_H
|
|
|
|
#define CONFIG_CM_T43
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */
|
|
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
|
|
|
|
#include <asm/arch/omap.h>
|
|
|
|
/* Serial support */
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_CLK 48000000
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000
|
|
#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#endif
|
|
|
|
/* NAND support */
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
/* CPSW Ethernet support */
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DEFAULT
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_PHY_ATHEROS
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 64
|
|
|
|
/* USB support */
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
#define CONFIG_AM437X_USB2PHY2_HOST
|
|
|
|
/* SPI Flash support */
|
|
#define CONFIG_TI_SPI_MMAP
|
|
#define CONFIG_SF_DEFAULT_SPEED 48000000
|
|
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
|
|
|
|
/* Power */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_TPS65218
|
|
|
|
/* Enabling L2 Cache */
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE 0x48242000
|
|
|
|
/*
|
|
* Since SPL did pll and ddr initialization for us,
|
|
* we don't need to do it twice.
|
|
*/
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
#undef CONFIG_SYS_MONITOR_LEN
|
|
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
#define CONFIG_ENV_OFFSET (768 * 1024)
|
|
#define CONFIG_ENV_SPI_MAX_HZ 48000000
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x80200000\0" \
|
|
"fdtaddr=0x81200000\0" \
|
|
"bootm_size=0x8000000\0" \
|
|
"autoload=no\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"fdtfile=am437x-sb-som-t43.dtb\0" \
|
|
"kernel=zImage-cm-t43\0" \
|
|
"bootscr=bootscr.img\0" \
|
|
"emmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"emmcrootfstype=ext4 rootwait\0" \
|
|
"emmcargs=setenv bootargs console=${console} " \
|
|
"root=${emmcroot} " \
|
|
"rootfstype=${emmcrootfstype}\0" \
|
|
"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"emmcboot=echo Booting from emmc ... && " \
|
|
"run emmcargs && " \
|
|
"load mmc 1 ${loadaddr} ${kernel} && " \
|
|
"load mmc 1 ${fdtaddr} ${fdtfile} && " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev 0; " \
|
|
"if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"mmc dev 1; " \
|
|
"if mmc rescan; then " \
|
|
"run emmcboot; " \
|
|
"fi;"
|
|
|
|
/* SPL defines. */
|
|
#define CONFIG_SPL_TEXT_BASE 0x40300350
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
|
|
/* EEPROM */
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
#define CONFIG_SYS_EEPROM_SIZE 256
|
|
|
|
#endif /* __CONFIG_CM_T43_H */
|