u-boot/configs/da850evm_nand_defconfig
Adam Ford 93f3362762 ARM: configs: Add da850evm_nand to boot from NAND
The DA850-EVM supports booting from NAND when used with the
UI expander board.  da850evm_nand will create an ais file
that can be burned to NAND and booted while storing the env in
NAND along with some partitions tables for storing kernel,
dtb and rootfs in NAND.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11 21:37:31 -04:00

60 lines
1.6 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_TARGET_DA850EVM=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_TIME is not set
# CONFIG_CMD_EXT4 is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand512"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand512:128k(u-boot env),512k(u-boot),128k(spl-os),8m(kernel),-(rootfs)"
CONFIG_CMD_DIAG=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_MTD_PARTITIONS=y
CONFIG_NAND=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DAVINCI_SPI=y
# CONFIG_FAT_WRITE is not set
CONFIG_USE_TINY_PRINTF=y