u-boot/configs/conga-qeval20-qa3-e3845_defconfig
Stefan Roese 82ceba2ca2 x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).

Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.

Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe

Not supported yet is:
- I2C
- USB 3.0

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00

47 lines
1.1 KiB
Text

CONFIG_X86=y
CONFIG_VENDOR_CONGATEC=y
CONFIG_TARGET_CONGA_QEVAL20_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_HAVE_INTEL_ME=y
CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_BOOTSTAGE=y
CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_WINBOND_W83627=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_E1000=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_SYS_NS16550=y
CONFIG_ICH_SPI=y
CONFIG_TIMER=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_USE_PRIVATE_LIBGCC=y