Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 05:42:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/aristainetos/aristainetos.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header 
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

550 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*/
#include <command.h>
#include <image.h>
#include <init.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/global_data.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/video.h>
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <bmp_logo.h>
#include <dm/root.h>
#include <env.h>
#include <env_internal.h>
#include <i2c_eeprom.h>
#include <i2c.h>
#include <micrel.h>
#include <miiphy.h>
#include <lcd.h>
#include <led.h>
#include <power/pmic.h>
#include <power/regulator.h>
#include <power/da9063_pmic.h>
#include <splash.h>
#include <video_fb.h>
DECLARE_GLOBAL_DATA_PTR;
enum {
BOARD_TYPE_4 = 4,
BOARD_TYPE_7 = 7,
};
#define ARI_BT_4 "aristainetos2_4@2"
#define ARI_BT_7 "aristainetos2_7@1"
int board_phy_config(struct phy_device *phydev)
{
/* control data pad skew - devaddr = 0x02, register = 0x04 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
/* rx data pad skew - devaddr = 0x02, register = 0x05 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
/* tx data pad skew - devaddr = 0x02, register = 0x06 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
static int rotate_logo_one(unsigned char *out, unsigned char *in)
{
int i, j;
for (i = 0; i < BMP_LOGO_WIDTH; i++)
for (j = 0; j < BMP_LOGO_HEIGHT; j++)
out[j * BMP_LOGO_WIDTH + BMP_LOGO_HEIGHT - 1 - i] =
in[i * BMP_LOGO_WIDTH + j];
return 0;
}
/*
* Rotate the BMP_LOGO (only)
* Will only work, if the logo is square, as
* BMP_LOGO_HEIGHT and BMP_LOGO_WIDTH are defines, not variables
*/
void rotate_logo(int rotations)
{
unsigned char out_logo[BMP_LOGO_WIDTH * BMP_LOGO_HEIGHT];
struct bmp_header *header;
unsigned char *in_logo;
int i, j;
if (BMP_LOGO_WIDTH != BMP_LOGO_HEIGHT)
return;
header = (struct bmp_header *)bmp_logo_bitmap;
in_logo = bmp_logo_bitmap + header->data_offset;
/* one 90 degree rotation */
if (rotations == 1 || rotations == 2 || rotations == 3)
rotate_logo_one(out_logo, in_logo);
/* second 90 degree rotation */
if (rotations == 2 || rotations == 3)
rotate_logo_one(in_logo, out_logo);
/* third 90 degree rotation */
if (rotations == 3)
rotate_logo_one(out_logo, in_logo);
/* copy result back to original array */
if (rotations == 1 || rotations == 3)
for (i = 0; i < BMP_LOGO_WIDTH; i++)
for (j = 0; j < BMP_LOGO_HEIGHT; j++)
in_logo[i * BMP_LOGO_WIDTH + j] =
out_logo[i * BMP_LOGO_WIDTH + j];
}
static void enable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
int reg;
s32 timeout = 100000;
/* set PLL5 clock */
reg = readl(&ccm->analog_pll_video);
reg |= BM_ANADIG_PLL_VIDEO_POWERDOWN;
writel(reg, &ccm->analog_pll_video);
/* set PLL5 to 232720000Hz */
reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x26);
reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
writel(reg, &ccm->analog_pll_video);
writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xC0238),
&ccm->analog_pll_video_num);
writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xF4240),
&ccm->analog_pll_video_denom);
reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
writel(reg, &ccm->analog_pll_video);
while (timeout--)
if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
break;
if (timeout < 0)
printf("Warning: video pll lock timeout!\n");
reg = readl(&ccm->analog_pll_video);
reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
writel(reg, &ccm->analog_pll_video);
/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
reg = readl(&ccm->cs2cdr);
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
writel(reg, &ccm->cs2cdr);
reg = readl(&ccm->cscmr2);
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
writel(reg, &ccm->cscmr2);
reg = readl(&ccm->chsccdr);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &ccm->chsccdr);
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
| IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
writel(reg, &iomux->gpr[2]);
reg = readl(&iomux->gpr[3]);
reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
writel(reg, &iomux->gpr[3]);
}
static void setup_display(void)
{
enable_ipu_clock();
}
static void set_gpr_register(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
writel(IOMUXC_GPR1_APP_CLK_REQ_N | IOMUXC_GPR1_PCIE_RDY_L23 |
IOMUXC_GPR1_EXC_MON_SLVE |
(2 << IOMUXC_GPR1_ADDRS0_OFFSET) |
IOMUXC_GPR1_ACT_CS0,
&iomuxc_regs->gpr[1]);
writel(0x0, &iomuxc_regs->gpr[8]);
writel(IOMUXC_GPR12_ARMP_IPG_CLK_EN | IOMUXC_GPR12_ARMP_AHB_CLK_EN |
IOMUXC_GPR12_ARMP_ATB_CLK_EN | IOMUXC_GPR12_ARMP_APB_CLK_EN,
&iomuxc_regs->gpr[12]);
}
extern char __bss_start[], __bss_end[];
int board_early_init_f(void)
{
select_ldb_di_clock_source(MXC_PLL5_CLK);
set_gpr_register();
/*
* clear bss here, so we can use spi driver
* before relocation and read Environment
* from spi flash.
*/
memset(__bss_start, 0x00, __bss_end - __bss_start);
return 0;
}
static void setup_one_led(char *label, int state)
{
struct udevice *dev;
int ret;
ret = led_get_by_label(label, &dev);
if (ret == 0)
led_set_state(dev, state);
}
static void setup_board_gpio(void)
{
setup_one_led("led_ena", LEDST_ON);
/* switch off Status LEDs */
setup_one_led("led_yellow", LEDST_OFF);
setup_one_led("led_red", LEDST_OFF);
setup_one_led("led_green", LEDST_OFF);
setup_one_led("led_blue", LEDST_OFF);
}
static void aristainetos_run_rescue_command(int reason)
{
char rescue_reason_command[20];
sprintf(rescue_reason_command, "setenv rreason %d", reason);
run_command(rescue_reason_command, 0);
}
static int aristainetos_bootmode_settings(void)
{
struct gpio_desc *desc;
struct src *psrc = (struct src *)SRC_BASE_ADDR;
unsigned int sbmr1 = readl(&psrc->sbmr1);
char *my_bootdelay;
char bootmode = 0;
int ret;
struct udevice *dev;
int off;
u8 data[0x10];
u8 rescue_reason;
/* jumper controlled reset of the environment */
ret = gpio_hog_lookup_name("env_reset", &desc);
if (!ret) {
if (dm_gpio_get_value(desc)) {
printf("\nReset u-boot environment (jumper)\n");
run_command("run default_env; saveenv; saveenv", 0);
}
}
off = fdt_path_offset(gd->fdt_blob, "eeprom0");
if (off < 0) {
printf("%s: No eeprom0 path offset\n", __func__);
return off;
}
ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
if (ret) {
printf("%s: Could not find EEPROM\n", __func__);
return ret;
}
ret = i2c_set_chip_offset_len(dev, 2);
if (ret)
return ret;
ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, sizeof(data));
if (ret) {
printf("%s: Could not read EEPROM\n", __func__);
return ret;
}
/* software controlled reset of the environment (EEPROM magic) */
if (strncmp((char *)data, "DeF", 3) == 0) {
memset(data, 0xff, 3);
i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)data, 3);
printf("\nReset u-boot environment (EEPROM)\n");
run_command("run default_env; saveenv; saveenv", 0);
}
if (sbmr1 & 0x40) {
env_set("bootmode", "1");
printf("SD bootmode jumper set!\n");
} else {
env_set("bootmode", "0");
}
/*
* Check the boot-source. If booting from NOR Flash,
* disable bootdelay
*/
ret = gpio_hog_lookup_name("bootsel0", &desc);
if (!ret)
bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 0;
ret = gpio_hog_lookup_name("bootsel1", &desc);
if (!ret)
bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 1;
ret = gpio_hog_lookup_name("bootsel2", &desc);
if (!ret)
bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 2;
if (bootmode == 7) {
my_bootdelay = env_get("nor_bootdelay");
if (my_bootdelay)
env_set("bootdelay", my_bootdelay);
else
env_set("bootdelay", "-2");
}
/* jumper controlled boot of the rescue system */
ret = gpio_hog_lookup_name("boot_rescue", &desc);
if (!ret) {
if (dm_gpio_get_value(desc)) {
printf("\nBooting into Rescue System (jumper)\n");
aristainetos_run_rescue_command(16);
run_command("run rescue_xload_boot", 0);
}
}
/* software controlled boot of the rescue system (EEPROM magic) */
if (strncmp((char *)&data[3], "ReScUe", 6) == 0) {
rescue_reason = *(uint8_t *)&data[9];
memset(&data[3], 0xff, 7);
i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7);
printf("\nBooting into Rescue System (EEPROM)\n");
aristainetos_run_rescue_command(rescue_reason);
run_command("run rescue_xload_boot", 0);
}
return 0;
}
#if defined(CONFIG_DM_PMIC_DA9063)
/*
* On the aristainetos2c boards the PMIC needs to be initialized,
* because the Ethernet PHY uses a different regulator that is not
* setup per hardware default. This does not influence the other versions
* as this regulator isn't used there at all.
*
* Unfortunately we have not yet a interface to setup all
* values we need.
*/
static int setup_pmic_voltages(void)
{
struct udevice *dev;
int off;
int ret;
off = fdt_path_offset(gd->fdt_blob, "pmic0");
if (off < 0) {
printf("%s: No pmic path offset\n", __func__);
return off;
}
ret = uclass_get_device_by_of_offset(UCLASS_PMIC, off, &dev);
if (ret) {
printf("%s: Could not find PMIC\n", __func__);
return ret;
}
pmic_reg_write(dev, DA9063_REG_PAGE_CON, 0x01);
pmic_reg_write(dev, DA9063_REG_BPRO_CFG, 0xc1);
ret = pmic_reg_read(dev, DA9063_REG_BUCK_ILIM_B);
if (ret < 0) {
printf("%s: error %d get register\n", __func__, ret);
return ret;
}
ret &= 0xf0;
ret |= 0x09;
pmic_reg_write(dev, DA9063_REG_BUCK_ILIM_B, ret);
pmic_reg_write(dev, DA9063_REG_VBPRO_A, 0x43);
pmic_reg_write(dev, DA9063_REG_VBPRO_B, 0xc3);
return 0;
}
#else
static int setup_pmic_voltages(void)
{
return 0;
}
#endif
int board_late_init(void)
{
int x, y;
int ret;
led_default_state();
splash_get_pos(&x, &y);
bmp_display((ulong)&bmp_logo_bitmap[0], x, y);
ret = aristainetos_bootmode_settings();
if (ret)
return ret;
/* set board_type */
if (gd->board_type == BOARD_TYPE_4)
env_set("board_type", ARI_BT_4);
else
env_set("board_type", ARI_BT_7);
if (setup_pmic_voltages())
printf("Error setup PMIC\n");
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
struct display_info_t const displays[] = {
{
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = NULL,
.enable = enable_lvds,
.mode = {
.name = "lb07wv8",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30066,
.left_margin = 88,
.right_margin = 88,
.upper_margin = 20,
.lower_margin = 20,
.hsync_len = 80,
.vsync_len = 5,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
}
}
};
size_t display_count = ARRAY_SIZE(displays);
int board_init(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
setup_board_gpio();
setup_display();
/* GPIO_1 for USB_OTG_ID */
clrsetbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK, 0);
return 0;
}
int board_fit_config_name_match(const char *name)
{
if (gd->board_type == BOARD_TYPE_4 &&
strchr(name, 0x34))
return 0;
if (gd->board_type == BOARD_TYPE_7 &&
strchr(name, 0x37))
return 0;
return -1;
}
static void do_board_detect(void)
{
int ret;
char s[30];
/* default use board type 7 */
gd->board_type = BOARD_TYPE_7;
if (env_init())
return;
ret = env_get_f("panel", s, sizeof(s));
if (ret < 0)
return;
if (!strncmp("lg4573", s, 6))
gd->board_type = BOARD_TYPE_4;
}
#ifdef CONFIG_DTB_RESELECT
int embedded_dtb_select(void)
{
int rescan;
do_board_detect();
fdtdec_resetup(&rescan);
return 0;
}
#endif
enum env_location env_get_location(enum env_operation op, int prio)
{
if (op == ENVOP_SAVE || op == ENVOP_ERASE)
return ENVL_SPI_FLASH;
switch (prio) {
case 0:
return ENVL_NOWHERE;
case 1:
return ENVL_SPI_FLASH;
default:
return ENVL_UNKNOWN;
}
return ENVL_UNKNOWN;
}
Reference in a new issue View git blame Copy permalink