u-boot/include/configs/xilinx_versal.h
Aswath Govindraju 8e3ea2da72 usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig
Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and
CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h
files and also in <board_name>_defconfig files without a Kconfig option. It
is easier for users to set these configs in defconfig files than in config
header files as they are a part of the source code.

Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py
script.

Suggested-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-08 21:38:53 -04:00

163 lines
4.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration for Xilinx Versal
* (C) Copyright 2016 - 2018 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*
* Based on Configuration for Xilinx ZynqMP
*/
#ifndef __XILINX_VERSAL_H
#define __XILINX_VERSAL_H
#define CONFIG_REMAKE_ELF
/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0xF9000000
#define GICR_BASE 0xF9080000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if CONFIG_COUNTER_FREQUENCY
# define COUNTER_FREQUENCY CONFIG_COUNTER_FREQUENCY
#endif
/* Serial setup */
#define CONFIG_CPU_ARMV8
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_MAY_FAIL
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR 0x8000000
/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MAXARGS 64
#if defined(CONFIG_CMD_DFU)
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_THOR_RESET_OFF
#endif
/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_NET_MULTI
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define PHY_ANEG_TIMEOUT 20000
#endif
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
#define CONFIG_CLOCKS
#define ENV_MEM_LAYOUT_SETTINGS \
"fdt_addr_r=0x40000000\0" \
"fdt_size_r=0x400000\0" \
"pxefile_addr_r=0x10000000\0" \
"kernel_addr_r=0x18000000\0" \
"kernel_size_r=0x10000000\0" \
"scriptaddr=0x20000000\0" \
"ramdisk_addr_r=0x02100000\0" \
"script_size_f=0x80000\0"
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
# define BOOT_TARGET_DEVICES_MMC(func)
#endif
#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
#else
# define BOOT_TARGET_DEVICES_PXE(func)
#endif
#if defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
#else
# define BOOT_TARGET_DEVICES_DHCP(func)
#endif
#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL)
# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0)
#else
# define BOOT_TARGET_DEVICES_XSPI(func)
#endif
#define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \
"bootcmd_xspi0=sf probe 0 0 0 && " \
"sf read $scriptaddr $script_offset_f $script_size_f && " \
"echo XSPI: Trying to boot script at ${scriptaddr} && " \
"source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \
"xspi0 "
#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
"jtag "
#define BOOT_TARGET_DEVICES_USB_DFU(func) \
func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1)
#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
"$scriptaddr $script_size_f && " \
"dfu " #instance " ram " #instance " 60 && " \
"echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \
"source ${scriptaddr}; " \
"echo DFU" #instance ": SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
""
#define BOOT_TARGET_DEVICES_USB_THOR(func) \
func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1)
#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
"$scriptaddr $script_size_f && " \
"thordown " #instance " ram " #instance " && " \
"echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \
"source ${scriptaddr}; " \
"echo THOR" #instance ": SCRIPT FAILED: continuing...;\0"
#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \
""
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_DEVICES_JTAG(func) \
BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_XSPI(func) \
BOOT_TARGET_DEVICES_USB_DFU(func) \
BOOT_TARGET_DEVICES_USB_THOR(func) \
BOOT_TARGET_DEVICES_PXE(func) \
BOOT_TARGET_DEVICES_DHCP(func)
#include <config_distro_bootcmd.h>
/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
#endif /* __XILINX_VERSAL_H */