mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 11:43:22 +00:00
e0c4fac79d
The ecm variable in sdram.c was being declared for all 8548, but only used by specific 8548 boards, so we make that variable require those specific boards, too The nand code was using an index "i" into a table, and then re-using "i" to set addresses for each upm. However, then it relied on the old value of i still being there to enable things. Changed the second "i" to "j" Signed-off-by: Andy Fleming <afleming@freescale.com>
484 lines
12 KiB
C
484 lines
12 KiB
C
|
|
/*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
|
|
struct sdram_conf_s {
|
|
unsigned long size;
|
|
unsigned long reg;
|
|
#ifdef CONFIG_TQM8548
|
|
unsigned long refresh;
|
|
#endif /* CONFIG_TQM8548 */
|
|
};
|
|
|
|
typedef struct sdram_conf_s sdram_conf_t;
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
#ifdef CONFIG_TQM8548_AG
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(1024 << 20), 0x80044202, 0x0002D000}, /* 1024MB, 14x10(4) */
|
|
{ (512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
|
|
{ (256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
|
|
{ (128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
|
|
};
|
|
#else /* !CONFIG_TQM8548_AG */
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
|
|
{(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
|
|
{(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
|
|
};
|
|
#endif /* CONFIG_TQM8548_AG */
|
|
#else /* !CONFIG_TQM8548 */
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
|
|
{(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
|
|
{(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
|
|
{( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
|
|
};
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
|
|
|
|
int cas_latency (void);
|
|
|
|
/*
|
|
* Autodetect onboard DDR SDRAM on 85xx platforms
|
|
*
|
|
* NOTE: Some of the hardcoded values are hardware dependant,
|
|
* so this should be extended for other future boards
|
|
* using this routine!
|
|
*/
|
|
long int sdram_setup (int casl)
|
|
{
|
|
int i;
|
|
volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
|
|
#ifdef CONFIG_TQM8548
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
#endif
|
|
#else /* !CONFIG_TQM8548 */
|
|
unsigned long cfg_ddr_timing1;
|
|
unsigned long cfg_ddr_mode;
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
/*
|
|
* Disable memory controller.
|
|
*/
|
|
ddr->cs0_config = 0;
|
|
ddr->sdram_cfg = 0;
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
/* Timing and refresh settings for DDR2-533 and below */
|
|
|
|
ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
|
|
ddr->cs0_config = ddr_cs_conf[0].reg;
|
|
ddr->timing_cfg_3 = 0x00020000;
|
|
|
|
/* TIMING CFG 1, 533MHz
|
|
* PRETOACT: 4 Clocks
|
|
* ACTTOPRE: 12 Clocks
|
|
* ACTTORW: 4 Clocks
|
|
* CASLAT: 4 Clocks
|
|
* REFREC: EXT_REFREC:REFREC 53 Clocks
|
|
* WRREC: 4 Clocks
|
|
* ACTTOACT: 3 Clocks
|
|
* WRTORD: 2 Clocks
|
|
*/
|
|
ddr->timing_cfg_1 = 0x4C47D432;
|
|
|
|
/* TIMING CFG 2, 533MHz
|
|
* ADD_LAT: 3 Clocks
|
|
* CPO: READLAT + 1
|
|
* WR_LAT: 3 Clocks
|
|
* RD_TO_PRE: 2 Clocks
|
|
* WR_DATA_DELAY: 1/2 Clock
|
|
* CKE_PLS: 3 Clock
|
|
* FOUR_ACT: 14 Clocks
|
|
*/
|
|
ddr->timing_cfg_2 = 0x331848CE;
|
|
|
|
/* DDR SDRAM Mode, 533MHz
|
|
* MRS: Extended Mode Register
|
|
* OUT: Outputs enabled
|
|
* RDQS: no
|
|
* DQS: enabled
|
|
* OCD: default state
|
|
* RTT: 75 Ohms
|
|
* Posted CAS: 3 Clocks
|
|
* ODS: reduced strength
|
|
* DLL: enabled
|
|
* MR: Mode Register
|
|
* PD: fast exit
|
|
* WR: 4 Clocks
|
|
* DLL: no DLL reset
|
|
* TM: normal
|
|
* CAS latency: 4 Clocks
|
|
* BT: sequential
|
|
* Burst length: 4
|
|
*/
|
|
ddr->sdram_mode = 0x439E0642;
|
|
|
|
/* DDR SDRAM Interval, 533MHz
|
|
* REFINT: 1040 Clocks
|
|
* BSTOPRE: 256
|
|
*/
|
|
ddr->sdram_interval = (1040 << 16) | 0x100;
|
|
|
|
/*
|
|
* Workaround for erratum DDR19 according to MPC8548 Device Errata
|
|
* document, Rev. 1: DDR IO receiver must be set to an acceptable
|
|
* bias point by modifying a hidden register.
|
|
*/
|
|
if (SVR_REV (get_svr ()) < 0x21)
|
|
gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */
|
|
|
|
/* DDR SDRAM CFG 2
|
|
* FRC_SR: normal mode
|
|
* SR_IE: no self-refresh interrupt
|
|
* DLL_RST_DIS: don't care, leave at reset value
|
|
* DQS_CFG: differential DQS signals
|
|
* ODT_CFG: assert ODT to internal IOs only during reads to DRAM
|
|
* LVWx_CFG: don't care, leave at reset value
|
|
* NUM_PR: 1 refresh will be issued at a time
|
|
* DM_CFG: don't care, leave at reset value
|
|
* D_INIT: no data initialization
|
|
*/
|
|
ddr->sdram_cfg_2 = 0x04401000;
|
|
|
|
/* DDR SDRAM MODE 2
|
|
* MRS: Extended Mode Register 2
|
|
*/
|
|
ddr->sdram_mode_2 = 0x8000C000;
|
|
|
|
/* DDR SDRAM CLK CNTL
|
|
* CLK_ADJUST: 1/2 Clock 0x02000000
|
|
* CLK_ADJUST: 5/8 Clock 0x02800000
|
|
*/
|
|
ddr->sdram_clk_cntl = 0x02800000;
|
|
|
|
/* wait for clock stabilization */
|
|
asm ("sync;isync;msync");
|
|
udelay (1000);
|
|
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
/*
|
|
* Workaround for erratum DDR20 according to MPC8548 Device Errata
|
|
* document, Rev. 1: "CKE signal may not function correctly after
|
|
* assertion of HRESET"
|
|
*/
|
|
|
|
/* 1. Configure DDR register as is done in normal DDR configuration.
|
|
* Do not set DDR_SDRAM_CFG[MEM_EN].
|
|
*
|
|
* 2. Set reserved bit EEBACR[3] at offset 0x1000
|
|
*/
|
|
ecm->eebacr |= 0x10000000;
|
|
|
|
/*
|
|
* 3. Before DDR_SDRAM_CFG[MEM_EN] is set, write DDR_SDRAM_CFG_2[D_INIT]
|
|
*
|
|
* DDR_SDRAM_CFG_2:
|
|
* FRC_SR: normal mode
|
|
* SR_IE: no self-refresh interrupt
|
|
* DLL_RST_DIS: don't care, leave at reset value
|
|
* DQS_CFG: differential DQS signals
|
|
* ODT_CFG: assert ODT to internal IOs only during reads to DRAM
|
|
* LVWx_CFG: don't care, leave at reset value
|
|
* NUM_PR: 1 refresh will be issued at a time
|
|
* DM_CFG: don't care, leave at reset value
|
|
* D_INIT: enable data initialization
|
|
*/
|
|
ddr->sdram_cfg_2 |= 0x00000010;
|
|
|
|
/*
|
|
* 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data
|
|
* training
|
|
*/
|
|
ddr->debug_3 |= 0x00000400;
|
|
|
|
/*
|
|
* 5. Wait 200 micro-seconds
|
|
*/
|
|
udelay (200);
|
|
|
|
/*
|
|
* 6. Set DDR_SDRAM_CFG[MEM_EN]
|
|
*
|
|
* BTW, initialize DDR_SDRAM_CFG:
|
|
* MEM_EN: enabled
|
|
* SREN: don't care, leave at reset value
|
|
* ECC_EN: no error report
|
|
* RD_EN: no registered DIMMs
|
|
* SDRAM_TYPE: DDR2
|
|
* DYN_PWR: no power management
|
|
* 32_BE: don't care, leave at reset value
|
|
* 8_BE: 4 beat burst
|
|
* NCAP: don't care, leave at reset value
|
|
* 2T_EN: 1T Timing
|
|
* BA_INTLV_CTL: no interleaving
|
|
* x32_EN: x16 organization
|
|
* PCHB8: MA[10] for auto-precharge
|
|
* HSE: half strength for single and 2-layer stacks
|
|
* (full strength for 3- and 4-layer stacks not
|
|
* yet considered)
|
|
* MEM_HALT: no halt
|
|
* BI: automatic initialization
|
|
*/
|
|
ddr->sdram_cfg = 0x83000008;
|
|
|
|
/*
|
|
* 7. Poll DDR_SDRAM_CFG_2[D_INIT] until it is cleared by hardware
|
|
*/
|
|
asm ("sync;isync;msync");
|
|
while (ddr->sdram_cfg_2 & 0x00000010)
|
|
asm ("eieio");
|
|
|
|
/*
|
|
* 8. Clear D3[21] to re-enable data training
|
|
*/
|
|
ddr->debug_3 &= ~0x00000400;
|
|
|
|
/*
|
|
* 9. Set D2(21) to force data training to run
|
|
*/
|
|
ddr->debug_2 |= 0x00000400;
|
|
|
|
/*
|
|
* 10. Poll on D2[21] until it is cleared by hardware
|
|
*/
|
|
asm ("sync;isync;msync");
|
|
while (ddr->debug_2 & 0x00000400)
|
|
asm ("eieio");
|
|
|
|
/*
|
|
* 11. Clear reserved bit EEBACR[3] at offset 0x1000
|
|
*/
|
|
ecm->eebacr &= ~0x10000000;
|
|
|
|
#else /* !(CONFIG_TQM8548_AG || CONFIG_TQM8548_BE) */
|
|
|
|
/* DDR SDRAM CLK CNTL
|
|
* MEM_EN: enabled
|
|
* SREN: don't care, leave at reset value
|
|
* ECC_EN: no error report
|
|
* RD_EN: no register DIMMs
|
|
* SDRAM_TYPE: DDR2
|
|
* DYN_PWR: no power management
|
|
* 32_BE: don't care, leave at reset value
|
|
* 8_BE: 4 beat burst
|
|
* NCAP: don't care, leave at reset value
|
|
* 2T_EN: 1T Timing
|
|
* BA_INTLV_CTL: no interleaving
|
|
* x32_EN: x16 organization
|
|
* PCHB8: MA[10] for auto-precharge
|
|
* HSE: half strength for single and 2-layer stacks
|
|
* (full strength for 3- and 4-layer stacks no yet considered)
|
|
* MEM_HALT: no halt
|
|
* BI: automatic initialization
|
|
*/
|
|
ddr->sdram_cfg = 0x83000008;
|
|
|
|
#endif /* CONFIG_TQM8548_AG || CONFIG_TQM8548_BE */
|
|
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
#else /* !CONFIG_TQM8548 */
|
|
switch (casl) {
|
|
case 20:
|
|
cfg_ddr_timing1 = 0x47405331 | (3 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (2 << 4);
|
|
break;
|
|
|
|
case 25:
|
|
cfg_ddr_timing1 = 0x47405331 | (4 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (6 << 4);
|
|
break;
|
|
|
|
case 30:
|
|
default:
|
|
cfg_ddr_timing1 = 0x47405331 | (5 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (3 << 4);
|
|
break;
|
|
}
|
|
|
|
ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
|
|
ddr->cs0_config = ddr_cs_conf[0].reg;
|
|
ddr->timing_cfg_1 = cfg_ddr_timing1;
|
|
ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
|
|
ddr->sdram_mode = cfg_ddr_mode;
|
|
ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
|
|
ddr->err_disable = 0x0000000D;
|
|
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
|
|
ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
for (i = 0; i < N_DDR_CS_CONF; i++) {
|
|
ddr->cs0_config = ddr_cs_conf[i].reg;
|
|
|
|
if (get_ram_size (0, ddr_cs_conf[i].size) ==
|
|
ddr_cs_conf[i].size) {
|
|
/*
|
|
* size detected -> set Chip Select Bounds Register
|
|
*/
|
|
ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
if (i < N_DDR_CS_CONF) {
|
|
/* Adjust refresh rate for DDR2 */
|
|
|
|
ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
|
|
|
|
ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
|
|
(ddr_cs_conf[i].refresh & 0x0000F000);
|
|
|
|
return ddr_cs_conf[i].size;
|
|
}
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
/* return size if detected, else return 0 */
|
|
return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
|
|
}
|
|
|
|
void board_add_ram_info (int use_default)
|
|
{
|
|
int casl;
|
|
|
|
if (use_default)
|
|
casl = CONFIG_DDR_DEFAULT_CL;
|
|
else
|
|
casl = cas_latency ();
|
|
|
|
puts (" (CL=");
|
|
switch (casl) {
|
|
case 20:
|
|
puts ("2)");
|
|
break;
|
|
|
|
case 25:
|
|
puts ("2.5)");
|
|
break;
|
|
|
|
case 30:
|
|
puts ("3)");
|
|
break;
|
|
}
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
int casl;
|
|
|
|
#if defined(CONFIG_DDR_DLL)
|
|
/*
|
|
* This DLL-Override only used on TQM8540 and TQM8560
|
|
*/
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int i, x;
|
|
|
|
x = 10;
|
|
|
|
/*
|
|
* Work around to stabilize DDR DLL
|
|
*/
|
|
gur->ddrdllcr = 0x81000000;
|
|
asm ("sync; isync; msync");
|
|
udelay (200);
|
|
while (gur->ddrdllcr != 0x81000100) {
|
|
gur->devdisr = gur->devdisr | 0x00010000;
|
|
asm ("sync; isync; msync");
|
|
for (i = 0; i < x; i++)
|
|
;
|
|
gur->devdisr = gur->devdisr & 0xfff7ffff;
|
|
asm ("sync; isync; msync");
|
|
x++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
casl = cas_latency ();
|
|
dram_size = sdram_setup (casl);
|
|
if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
|
|
/*
|
|
* Try again with default CAS latency
|
|
*/
|
|
puts ("Problem with CAS lantency");
|
|
board_add_ram_info (1);
|
|
puts (", using default CL!\n");
|
|
casl = CONFIG_DDR_DEFAULT_CL;
|
|
dram_size = sdram_setup (casl);
|
|
puts (" ");
|
|
}
|
|
|
|
return dram_size;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
|
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
|
uint *p;
|
|
|
|
printf ("SDRAM test phase 1:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf ("SDRAM test phase 2:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf ("SDRAM test passed.\n");
|
|
return 0;
|
|
}
|
|
#endif
|