mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
000ee4b739
According to datasheet, the output on LDO regulators will start appearing after 10-15 us. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
607 lines
11 KiB
C
607 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Samsung Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <power/pmic.h>
|
|
#include <power/regulator.h>
|
|
#include <power/s2mps11.h>
|
|
|
|
#define MODE(_id, _val, _name) { \
|
|
.id = _id, \
|
|
.register_value = _val, \
|
|
.name = _name, \
|
|
}
|
|
|
|
/* BUCK : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 */
|
|
static struct dm_regulator_mode s2mps11_buck_modes[] = {
|
|
MODE(OP_OFF, S2MPS11_BUCK_MODE_OFF, "OFF"),
|
|
MODE(OP_STANDBY, S2MPS11_BUCK_MODE_STANDBY, "ON/OFF"),
|
|
MODE(OP_ON, S2MPS11_BUCK_MODE_STANDBY, "ON"),
|
|
};
|
|
|
|
static struct dm_regulator_mode s2mps11_ldo_modes[] = {
|
|
MODE(OP_OFF, S2MPS11_LDO_MODE_OFF, "OFF"),
|
|
MODE(OP_STANDBY, S2MPS11_LDO_MODE_STANDBY, "ON/OFF"),
|
|
MODE(OP_STANDBY_LPM, S2MPS11_LDO_MODE_STANDBY_LPM, "ON/LPM"),
|
|
MODE(OP_ON, S2MPS11_LDO_MODE_ON, "ON"),
|
|
};
|
|
|
|
static const char s2mps11_buck_ctrl[] = {
|
|
0xff, 0x25, 0x27, 0x29, 0x2b, 0x2d, 0x33, 0x35, 0x37, 0x39, 0x3b
|
|
};
|
|
|
|
static const char s2mps11_buck_out[] = {
|
|
0xff, 0x26, 0x28, 0x2a, 0x2c, 0x2f, 0x34, 0x36, 0x38, 0x3a, 0x3c
|
|
};
|
|
|
|
static int s2mps11_buck_hex2volt(int buck, int hex)
|
|
{
|
|
unsigned int uV = 0;
|
|
|
|
if (hex < 0)
|
|
goto bad;
|
|
|
|
switch (buck) {
|
|
case 7:
|
|
case 8:
|
|
case 10:
|
|
if (hex > S2MPS11_BUCK7_8_10_VOLT_MAX_HEX)
|
|
goto bad;
|
|
|
|
uV = hex * S2MPS11_BUCK_HSTEP + S2MPS11_BUCK_UV_HMIN;
|
|
break;
|
|
case 9:
|
|
if (hex > S2MPS11_BUCK9_VOLT_MAX_HEX)
|
|
goto bad;
|
|
uV = hex * S2MPS11_BUCK9_STEP * 2 + S2MPS11_BUCK9_UV_MIN;
|
|
break;
|
|
default:
|
|
if (buck == 5 && hex > S2MPS11_BUCK5_VOLT_MAX_HEX)
|
|
goto bad;
|
|
else if (buck != 5 && hex > S2MPS11_BUCK_VOLT_MAX_HEX)
|
|
goto bad;
|
|
|
|
uV = hex * S2MPS11_BUCK_LSTEP + S2MPS11_BUCK_UV_MIN;
|
|
break;
|
|
}
|
|
|
|
return uV;
|
|
bad:
|
|
pr_err("Value: %#x is wrong for BUCK%d", hex, buck);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int s2mps11_buck_volt2hex(int buck, int uV)
|
|
{
|
|
int hex;
|
|
|
|
switch (buck) {
|
|
case 7:
|
|
case 8:
|
|
case 10:
|
|
hex = (uV - S2MPS11_BUCK_UV_HMIN) / S2MPS11_BUCK_HSTEP;
|
|
if (hex > S2MPS11_BUCK7_8_10_VOLT_MAX_HEX)
|
|
goto bad;
|
|
|
|
break;
|
|
case 9:
|
|
hex = (uV - S2MPS11_BUCK9_UV_MIN) / S2MPS11_BUCK9_STEP;
|
|
if (hex > S2MPS11_BUCK9_VOLT_MAX_HEX)
|
|
goto bad;
|
|
break;
|
|
default:
|
|
hex = (uV - S2MPS11_BUCK_UV_MIN) / S2MPS11_BUCK_LSTEP;
|
|
if (buck == 5 && hex > S2MPS11_BUCK5_VOLT_MAX_HEX)
|
|
goto bad;
|
|
else if (buck != 5 && hex > S2MPS11_BUCK_VOLT_MAX_HEX)
|
|
goto bad;
|
|
break;
|
|
};
|
|
|
|
if (hex >= 0)
|
|
return hex;
|
|
|
|
bad:
|
|
pr_err("Value: %d uV is wrong for BUCK%d", uV, buck);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int s2mps11_buck_val(struct udevice *dev, int op, int *uV)
|
|
{
|
|
int hex, buck, ret;
|
|
u32 mask, addr;
|
|
u8 val;
|
|
|
|
buck = dev->driver_data;
|
|
if (buck < 1 || buck > S2MPS11_BUCK_NUM) {
|
|
pr_err("Wrong buck number: %d\n", buck);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (op == PMIC_OP_GET)
|
|
*uV = 0;
|
|
|
|
addr = s2mps11_buck_out[buck];
|
|
|
|
switch (buck) {
|
|
case 9:
|
|
mask = S2MPS11_BUCK9_VOLT_MASK;
|
|
break;
|
|
default:
|
|
mask = S2MPS11_BUCK_VOLT_MASK;
|
|
break;
|
|
}
|
|
|
|
ret = pmic_read(dev->parent, addr, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
val &= mask;
|
|
ret = s2mps11_buck_hex2volt(buck, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
*uV = ret;
|
|
return 0;
|
|
}
|
|
|
|
hex = s2mps11_buck_volt2hex(buck, *uV);
|
|
if (hex < 0)
|
|
return hex;
|
|
|
|
val &= ~mask;
|
|
val |= hex;
|
|
ret = pmic_write(dev->parent, addr, &val, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s2mps11_buck_mode(struct udevice *dev, int op, int *opmode)
|
|
{
|
|
unsigned int addr, mode;
|
|
unsigned char val;
|
|
int buck, ret;
|
|
|
|
buck = dev->driver_data;
|
|
if (buck < 1 || buck > S2MPS11_BUCK_NUM) {
|
|
pr_err("Wrong buck number: %d\n", buck);
|
|
return -EINVAL;
|
|
}
|
|
|
|
addr = s2mps11_buck_ctrl[buck];
|
|
|
|
ret = pmic_read(dev->parent, addr, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
val &= (S2MPS11_BUCK_MODE_MASK << S2MPS11_BUCK_MODE_SHIFT);
|
|
switch (val) {
|
|
case S2MPS11_BUCK_MODE_OFF:
|
|
*opmode = OP_OFF;
|
|
break;
|
|
case S2MPS11_BUCK_MODE_STANDBY:
|
|
*opmode = OP_STANDBY;
|
|
break;
|
|
case S2MPS11_BUCK_MODE_ON:
|
|
*opmode = OP_ON;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
switch (*opmode) {
|
|
case OP_OFF:
|
|
mode = S2MPS11_BUCK_MODE_OFF;
|
|
break;
|
|
case OP_STANDBY:
|
|
mode = S2MPS11_BUCK_MODE_STANDBY;
|
|
break;
|
|
case OP_ON:
|
|
mode = S2MPS11_BUCK_MODE_ON;
|
|
break;
|
|
default:
|
|
pr_err("Wrong mode: %d for buck: %d\n", *opmode, buck);
|
|
return -EINVAL;
|
|
}
|
|
|
|
val &= ~(S2MPS11_BUCK_MODE_MASK << S2MPS11_BUCK_MODE_SHIFT);
|
|
val |= mode;
|
|
ret = pmic_write(dev->parent, addr, &val, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s2mps11_buck_enable(struct udevice *dev, int op, bool *enable)
|
|
{
|
|
int ret, on_off;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
ret = s2mps11_buck_mode(dev, op, &on_off);
|
|
if (ret)
|
|
return ret;
|
|
switch (on_off) {
|
|
case OP_OFF:
|
|
*enable = false;
|
|
break;
|
|
case OP_ON:
|
|
*enable = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
} else if (op == PMIC_OP_SET) {
|
|
if (*enable)
|
|
on_off = OP_ON;
|
|
else
|
|
on_off = OP_OFF;
|
|
|
|
ret = s2mps11_buck_mode(dev, op, &on_off);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int buck_get_value(struct udevice *dev)
|
|
{
|
|
int uV;
|
|
int ret;
|
|
|
|
ret = s2mps11_buck_val(dev, PMIC_OP_GET, &uV);
|
|
if (ret)
|
|
return ret;
|
|
return uV;
|
|
}
|
|
|
|
static int buck_set_value(struct udevice *dev, int uV)
|
|
{
|
|
return s2mps11_buck_val(dev, PMIC_OP_SET, &uV);
|
|
}
|
|
|
|
static int buck_get_enable(struct udevice *dev)
|
|
{
|
|
bool enable = false;
|
|
int ret;
|
|
|
|
ret = s2mps11_buck_enable(dev, PMIC_OP_GET, &enable);
|
|
if (ret)
|
|
return ret;
|
|
return enable;
|
|
}
|
|
|
|
static int buck_set_enable(struct udevice *dev, bool enable)
|
|
{
|
|
return s2mps11_buck_enable(dev, PMIC_OP_SET, &enable);
|
|
}
|
|
|
|
static int buck_get_mode(struct udevice *dev)
|
|
{
|
|
int mode;
|
|
int ret;
|
|
|
|
ret = s2mps11_buck_mode(dev, PMIC_OP_GET, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mode;
|
|
}
|
|
|
|
static int buck_set_mode(struct udevice *dev, int mode)
|
|
{
|
|
return s2mps11_buck_mode(dev, PMIC_OP_SET, &mode);
|
|
}
|
|
|
|
static int s2mps11_buck_probe(struct udevice *dev)
|
|
{
|
|
struct dm_regulator_uclass_platdata *uc_pdata;
|
|
|
|
uc_pdata = dev_get_uclass_platdata(dev);
|
|
|
|
uc_pdata->type = REGULATOR_TYPE_BUCK;
|
|
uc_pdata->mode = s2mps11_buck_modes;
|
|
uc_pdata->mode_count = ARRAY_SIZE(s2mps11_buck_modes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_regulator_ops s2mps11_buck_ops = {
|
|
.get_value = buck_get_value,
|
|
.set_value = buck_set_value,
|
|
.get_enable = buck_get_enable,
|
|
.set_enable = buck_set_enable,
|
|
.get_mode = buck_get_mode,
|
|
.set_mode = buck_set_mode,
|
|
};
|
|
|
|
U_BOOT_DRIVER(s2mps11_buck) = {
|
|
.name = S2MPS11_BUCK_DRIVER,
|
|
.id = UCLASS_REGULATOR,
|
|
.ops = &s2mps11_buck_ops,
|
|
.probe = s2mps11_buck_probe,
|
|
};
|
|
|
|
static int s2mps11_ldo_hex2volt(int ldo, int hex)
|
|
{
|
|
unsigned int uV = 0;
|
|
|
|
if (hex > S2MPS11_LDO_VOLT_MAX_HEX) {
|
|
pr_err("Value: %#x is wrong for LDO%d", hex, ldo);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (ldo) {
|
|
case 1:
|
|
case 6:
|
|
case 11:
|
|
case 22:
|
|
case 23:
|
|
case 27:
|
|
case 35:
|
|
uV = hex * S2MPS11_LDO_STEP + S2MPS11_LDO_UV_MIN;
|
|
break;
|
|
default:
|
|
uV = hex * S2MPS11_LDO_STEP * 2 + S2MPS11_LDO_UV_MIN;
|
|
break;
|
|
}
|
|
|
|
return uV;
|
|
}
|
|
|
|
static int s2mps11_ldo_volt2hex(int ldo, int uV)
|
|
{
|
|
int hex = 0;
|
|
|
|
switch (ldo) {
|
|
case 1:
|
|
case 6:
|
|
case 11:
|
|
case 22:
|
|
case 23:
|
|
case 27:
|
|
case 35:
|
|
hex = (uV - S2MPS11_LDO_UV_MIN) / S2MPS11_LDO_STEP;
|
|
break;
|
|
default:
|
|
hex = (uV - S2MPS11_LDO_UV_MIN) / (S2MPS11_LDO_STEP * 2);
|
|
break;
|
|
}
|
|
|
|
if (hex >= 0 && hex <= S2MPS11_LDO_VOLT_MAX_HEX)
|
|
return hex;
|
|
|
|
pr_err("Value: %d uV is wrong for LDO%d", uV, ldo);
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s2mps11_ldo_val(struct udevice *dev, int op, int *uV)
|
|
{
|
|
unsigned int addr;
|
|
unsigned char val;
|
|
int hex, ldo, ret;
|
|
|
|
ldo = dev->driver_data;
|
|
if (ldo < 1 || ldo > S2MPS11_LDO_NUM) {
|
|
pr_err("Wrong ldo number: %d\n", ldo);
|
|
return -EINVAL;
|
|
}
|
|
|
|
addr = S2MPS11_REG_L1CTRL + ldo - 1;
|
|
|
|
ret = pmic_read(dev->parent, addr, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
*uV = 0;
|
|
val &= S2MPS11_LDO_VOLT_MASK;
|
|
ret = s2mps11_ldo_hex2volt(ldo, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*uV = ret;
|
|
return 0;
|
|
}
|
|
|
|
hex = s2mps11_ldo_volt2hex(ldo, *uV);
|
|
if (hex < 0)
|
|
return hex;
|
|
|
|
val &= ~S2MPS11_LDO_VOLT_MASK;
|
|
val |= hex;
|
|
ret = pmic_write(dev->parent, addr, &val, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s2mps11_ldo_mode(struct udevice *dev, int op, int *opmode)
|
|
{
|
|
unsigned int addr, mode;
|
|
unsigned char val;
|
|
int ldo, ret;
|
|
|
|
ldo = dev->driver_data;
|
|
if (ldo < 1 || ldo > S2MPS11_LDO_NUM) {
|
|
pr_err("Wrong ldo number: %d\n", ldo);
|
|
return -EINVAL;
|
|
}
|
|
addr = S2MPS11_REG_L1CTRL + ldo - 1;
|
|
|
|
ret = pmic_read(dev->parent, addr, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
val &= (S2MPS11_LDO_MODE_MASK << S2MPS11_LDO_MODE_SHIFT);
|
|
switch (val) {
|
|
case S2MPS11_LDO_MODE_OFF:
|
|
*opmode = OP_OFF;
|
|
break;
|
|
case S2MPS11_LDO_MODE_STANDBY:
|
|
*opmode = OP_STANDBY;
|
|
break;
|
|
case S2MPS11_LDO_MODE_STANDBY_LPM:
|
|
*opmode = OP_STANDBY_LPM;
|
|
break;
|
|
case S2MPS11_LDO_MODE_ON:
|
|
*opmode = OP_ON;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
switch (*opmode) {
|
|
case OP_OFF:
|
|
mode = S2MPS11_LDO_MODE_OFF;
|
|
break;
|
|
case OP_STANDBY:
|
|
mode = S2MPS11_LDO_MODE_STANDBY;
|
|
break;
|
|
case OP_STANDBY_LPM:
|
|
mode = S2MPS11_LDO_MODE_STANDBY_LPM;
|
|
break;
|
|
case OP_ON:
|
|
mode = S2MPS11_LDO_MODE_ON;
|
|
break;
|
|
default:
|
|
pr_err("Wrong mode: %d for ldo: %d\n", *opmode, ldo);
|
|
return -EINVAL;
|
|
}
|
|
|
|
val &= ~(S2MPS11_LDO_MODE_MASK << S2MPS11_LDO_MODE_SHIFT);
|
|
val |= mode;
|
|
ret = pmic_write(dev->parent, addr, &val, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s2mps11_ldo_enable(struct udevice *dev, int op, bool *enable)
|
|
{
|
|
int ret, on_off;
|
|
|
|
if (op == PMIC_OP_GET) {
|
|
ret = s2mps11_ldo_mode(dev, op, &on_off);
|
|
if (ret)
|
|
return ret;
|
|
switch (on_off) {
|
|
case OP_OFF:
|
|
*enable = false;
|
|
break;
|
|
case OP_ON:
|
|
*enable = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
} else if (op == PMIC_OP_SET) {
|
|
if (*enable)
|
|
on_off = OP_ON;
|
|
else
|
|
on_off = OP_OFF;
|
|
|
|
ret = s2mps11_ldo_mode(dev, op, &on_off);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ldo_get_value(struct udevice *dev)
|
|
{
|
|
int uV;
|
|
int ret;
|
|
|
|
ret = s2mps11_ldo_val(dev, PMIC_OP_GET, &uV);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return uV;
|
|
}
|
|
|
|
static int ldo_set_value(struct udevice *dev, int uV)
|
|
{
|
|
return s2mps11_ldo_val(dev, PMIC_OP_SET, &uV);
|
|
}
|
|
|
|
static int ldo_get_enable(struct udevice *dev)
|
|
{
|
|
bool enable = false;
|
|
int ret;
|
|
|
|
ret = s2mps11_ldo_enable(dev, PMIC_OP_GET, &enable);
|
|
if (ret)
|
|
return ret;
|
|
return enable;
|
|
}
|
|
|
|
static int ldo_set_enable(struct udevice *dev, bool enable)
|
|
{
|
|
int ret;
|
|
|
|
ret = s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait the "enable delay" for voltage to start to rise */
|
|
udelay(15);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ldo_get_mode(struct udevice *dev)
|
|
{
|
|
int mode, ret;
|
|
|
|
ret = s2mps11_ldo_mode(dev, PMIC_OP_GET, &mode);
|
|
if (ret)
|
|
return ret;
|
|
return mode;
|
|
}
|
|
|
|
static int ldo_set_mode(struct udevice *dev, int mode)
|
|
{
|
|
return s2mps11_ldo_mode(dev, PMIC_OP_SET, &mode);
|
|
}
|
|
|
|
static int s2mps11_ldo_probe(struct udevice *dev)
|
|
{
|
|
struct dm_regulator_uclass_platdata *uc_pdata;
|
|
|
|
uc_pdata = dev_get_uclass_platdata(dev);
|
|
uc_pdata->type = REGULATOR_TYPE_LDO;
|
|
uc_pdata->mode = s2mps11_ldo_modes;
|
|
uc_pdata->mode_count = ARRAY_SIZE(s2mps11_ldo_modes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_regulator_ops s2mps11_ldo_ops = {
|
|
.get_value = ldo_get_value,
|
|
.set_value = ldo_set_value,
|
|
.get_enable = ldo_get_enable,
|
|
.set_enable = ldo_set_enable,
|
|
.get_mode = ldo_get_mode,
|
|
.set_mode = ldo_set_mode,
|
|
};
|
|
|
|
U_BOOT_DRIVER(s2mps11_ldo) = {
|
|
.name = S2MPS11_LDO_DRIVER,
|
|
.id = UCLASS_REGULATOR,
|
|
.ops = &s2mps11_ldo_ops,
|
|
.probe = s2mps11_ldo_probe,
|
|
};
|