u-boot/board/quad100hd/nand.c
Gary Jennejohn 73ccb3410a ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
Signed-off-by: Gary Jennejohn <garyj@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-08 16:44:01 +02:00

79 lines
2 KiB
C

/*
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#if defined(CONFIG_CMD_NAND)
#include <asm/gpio.h>
#include <nand.h>
/*
* hardware specific access to control-lines
*/
static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
{
switch(cmd) {
case NAND_CTL_SETCLE:
gpio_write_bit(CFG_NAND_CLE, 1);
break;
case NAND_CTL_CLRCLE:
gpio_write_bit(CFG_NAND_CLE, 0);
break;
case NAND_CTL_SETALE:
gpio_write_bit(CFG_NAND_ALE, 1);
break;
case NAND_CTL_CLRALE:
gpio_write_bit(CFG_NAND_ALE, 0);
break;
case NAND_CTL_SETNCE:
gpio_write_bit(CFG_NAND_CE, 0);
break;
case NAND_CTL_CLRNCE:
gpio_write_bit(CFG_NAND_CE, 1);
break;
}
}
static int quad100hd_nand_ready(struct mtd_info *mtd)
{
return gpio_read_in_bit(CFG_NAND_RDY);
}
/*
* Main initialization routine
*/
int board_nand_init(struct nand_chip *nand)
{
/* Set address of hardware control function */
nand->hwcontrol = quad100hd_hwcontrol;
nand->dev_ready = quad100hd_nand_ready;
nand->eccmode = NAND_ECC_SOFT;
/* 15 us command delay time */
nand->chip_delay = 20;
/* Return happy */
return 0;
}
#endif /* CONFIG_CMD_NAND */