Yifeng Zhao b12dc5d6fa mtd: nand: NFC drivers for RK3308, RK2928 and others ... This driver supports Rockchip NFC (NAND Flash Controller) found on RK3308, RK2928, RKPX30, RV1108 and other SOCs. The driver has been tested using 8-bit NAND interface on the ARM based RK3308 platform. Support Rockchip SoCs and NFC versions: - PX30 and RK3326(NFCv900). ECC: 16/40/60/70 bits/1KB. CLOCK: ahb and nfc. - RK3308 and RV1108(NFCv800). ECC: 16 bits/1KB. CLOCK: ahb and nfc. - RK3036 and RK3128(NFCv622). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb and nfc. - RK3066, RK3188 and RK2928(NFCv600). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb. Supported features: - Read full page data by DMA. - Support HW ECC(one step is 1KB). - Support 2 - 32K page size. - Support 8 CS(depend on SoCs) Limitations: - No support for the ecc step size is 512. - Untested on some SoCs. - No support for subpages. - No support for the builtin randomizer. - The original bad block mask is not supported. It is recommended to use the BBT(bad block table). Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>		2021-06-18 14:37:20 +08:00
..
raw	mtd: nand: NFC drivers for RK3308, RK2928 and others	2021-06-18 14:37:20 +08:00
spi	mtd: spinand: Add WATCHDOG_RESET() in spinand_mtd_read/write()	2021-03-11 17:00:41 +01:00
bbt.c	Fix corner case in bad block table handling.	2020-08-04 23:30:02 -04:00
core.c	mtd: nand: Add WATCHDOG_RESET() in nanddev_mtd_erase()	2021-03-11 16:59:16 +01:00
Kconfig	mtd: nand: Add core infrastructure to support SPI NANDs	2018-09-20 20:10:49 +05:30
Makefile	mtd: Makefile: deep cleanup	2019-12-04 17:10:51 -05:00