mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
240 lines
6.2 KiB
C
240 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2006-2008
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <asm/io.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
|
|
static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
|
|
static struct mtd_info *mtd;
|
|
static struct nand_chip nand_chip;
|
|
|
|
#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
|
|
CONFIG_SYS_NAND_ECCSIZE)
|
|
#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)
|
|
|
|
|
|
#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
|
|
/*
|
|
* NAND command for small page NAND devices (512)
|
|
*/
|
|
static int nand_command(int block, int page, uint32_t offs,
|
|
u8 cmd)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
|
|
|
|
while (!this->dev_ready(mtd))
|
|
;
|
|
|
|
/* Begin command latch cycle */
|
|
this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
|
|
/* Set ALE and clear CLE to start address cycle */
|
|
/* Column address */
|
|
this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
|
|
this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
|
|
this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff,
|
|
NAND_CTRL_ALE); /* A[24:17] */
|
|
#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
|
|
/* One more address cycle for devices > 32MiB */
|
|
this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f,
|
|
NAND_CTRL_ALE); /* A[28:25] */
|
|
#endif
|
|
/* Latch in address */
|
|
this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
|
|
|
|
/*
|
|
* Wait a while for the data to be ready
|
|
*/
|
|
while (!this->dev_ready(mtd))
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
/*
|
|
* NAND command for large page NAND devices (2k)
|
|
*/
|
|
static int nand_command(int block, int page, uint32_t offs,
|
|
u8 cmd)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
|
|
void (*hwctrl)(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl) = this->cmd_ctrl;
|
|
|
|
while (!this->dev_ready(mtd))
|
|
;
|
|
|
|
/* Emulate NAND_CMD_READOOB */
|
|
if (cmd == NAND_CMD_READOOB) {
|
|
offs += CONFIG_SYS_NAND_PAGE_SIZE;
|
|
cmd = NAND_CMD_READ0;
|
|
}
|
|
|
|
/* Shift the offset from byte addressing to word addressing. */
|
|
if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
|
|
offs >>= 1;
|
|
|
|
/* Begin command latch cycle */
|
|
hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
|
|
/* Set ALE and clear CLE to start address cycle */
|
|
/* Column address */
|
|
hwctrl(mtd, offs & 0xff,
|
|
NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
|
|
hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
|
|
/* Row address */
|
|
hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
|
|
hwctrl(mtd, ((page_addr >> 8) & 0xff),
|
|
NAND_CTRL_ALE); /* A[27:20] */
|
|
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
/* One more address cycle for devices > 128MiB */
|
|
hwctrl(mtd, (page_addr >> 16) & 0x0f,
|
|
NAND_CTRL_ALE); /* A[31:28] */
|
|
#endif
|
|
/* Latch in address */
|
|
hwctrl(mtd, NAND_CMD_READSTART,
|
|
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
|
|
hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
|
|
|
|
/*
|
|
* Wait a while for the data to be ready
|
|
*/
|
|
while (!this->dev_ready(mtd))
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int nand_is_bad_block(int block)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
u_char bb_data[2];
|
|
|
|
nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
|
|
NAND_CMD_READOOB);
|
|
|
|
/*
|
|
* Read one byte (or two if it's a 16 bit chip).
|
|
*/
|
|
if (this->options & NAND_BUSWIDTH_16) {
|
|
this->read_buf(mtd, bb_data, 2);
|
|
if (bb_data[0] != 0xff || bb_data[1] != 0xff)
|
|
return 1;
|
|
} else {
|
|
this->read_buf(mtd, bb_data, 1);
|
|
if (bb_data[0] != 0xff)
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST)
|
|
static int nand_read_page(int block, int page, uchar *dst)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
u_char ecc_calc[ECCTOTAL];
|
|
u_char ecc_code[ECCTOTAL];
|
|
u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
|
|
int i;
|
|
int eccsize = CONFIG_SYS_NAND_ECCSIZE;
|
|
int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
|
|
int eccsteps = ECCSTEPS;
|
|
uint8_t *p = dst;
|
|
|
|
nand_command(block, page, 0, NAND_CMD_READOOB);
|
|
this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
|
|
nand_command(block, page, 0, NAND_CMD_READ0);
|
|
|
|
/* Pick the ECC bytes out of the oob data */
|
|
for (i = 0; i < ECCTOTAL; i++)
|
|
ecc_code[i] = oob_data[nand_ecc_pos[i]];
|
|
|
|
|
|
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
|
|
this->ecc.hwctl(mtd, NAND_ECC_READ);
|
|
this->read_buf(mtd, p, eccsize);
|
|
this->ecc.calculate(mtd, p, &ecc_calc[i]);
|
|
this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int nand_read_page(int block, int page, void *dst)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
u_char ecc_calc[ECCTOTAL];
|
|
u_char ecc_code[ECCTOTAL];
|
|
u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
|
|
int i;
|
|
int eccsize = CONFIG_SYS_NAND_ECCSIZE;
|
|
int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
|
|
int eccsteps = ECCSTEPS;
|
|
uint8_t *p = dst;
|
|
|
|
nand_command(block, page, 0, NAND_CMD_READ0);
|
|
|
|
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
|
|
if (this->ecc.mode != NAND_ECC_SOFT)
|
|
this->ecc.hwctl(mtd, NAND_ECC_READ);
|
|
this->read_buf(mtd, p, eccsize);
|
|
this->ecc.calculate(mtd, p, &ecc_calc[i]);
|
|
}
|
|
this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
|
|
|
|
/* Pick the ECC bytes out of the oob data */
|
|
for (i = 0; i < ECCTOTAL; i++)
|
|
ecc_code[i] = oob_data[nand_ecc_pos[i]];
|
|
|
|
eccsteps = ECCSTEPS;
|
|
p = dst;
|
|
|
|
for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
|
|
/* No chance to do something with the possible error message
|
|
* from correct_data(). We just hope that all possible errors
|
|
* are corrected by this routine.
|
|
*/
|
|
this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* nand_init() - initialize data to make nand usable by SPL */
|
|
void nand_init(void)
|
|
{
|
|
/*
|
|
* Init board specific nand support
|
|
*/
|
|
mtd = nand_to_mtd(&nand_chip);
|
|
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
|
|
(void __iomem *)CONFIG_SYS_NAND_BASE;
|
|
board_nand_init(&nand_chip);
|
|
|
|
#ifdef CONFIG_SPL_NAND_SOFTECC
|
|
if (nand_chip.ecc.mode == NAND_ECC_SOFT) {
|
|
nand_chip.ecc.calculate = nand_calculate_ecc;
|
|
nand_chip.ecc.correct = nand_correct_data;
|
|
}
|
|
#endif
|
|
|
|
if (nand_chip.select_chip)
|
|
nand_chip.select_chip(mtd, 0);
|
|
}
|
|
|
|
/* Unselect after operation */
|
|
void nand_deselect(void)
|
|
{
|
|
if (nand_chip.select_chip)
|
|
nand_chip.select_chip(mtd, -1);
|
|
}
|
|
|
|
#include "nand_spl_loaders.c"
|