mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 18:23:08 +00:00
eaf6ea6a1d
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
97 lines
3.2 KiB
C
97 lines
3.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Config file for BuR BRPP2_IMX6 board
|
|
*
|
|
* Copyright (C) 2018
|
|
* B&R Industrial Automation GmbH - http://www.br-automation.com/
|
|
*/
|
|
#ifndef __CONFIG_BRPP2_IMX6_H
|
|
#define __CONFIG_BRPP2_IMX6_H
|
|
|
|
#include <configs/bur_cfg_common.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
/* -- i.mx6 specifica -- */
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE L2_PL310_BASE
|
|
#endif /* !CONFIG_SYS_L2CACHE_OFF */
|
|
|
|
#define CONFIG_MXC_GPT_HCLK
|
|
|
|
/* MMC */
|
|
|
|
/* Boot */
|
|
|
|
/* misc */
|
|
|
|
/* Environment */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BUR_COMMON_ENV \
|
|
"autoload=0\0" \
|
|
"cfgaddr=0x106F0000\0" \
|
|
"scraddr=0x10700000\0" \
|
|
"loadaddr=0x10800000\0" \
|
|
"dtbaddr=0x12000000\0" \
|
|
"ramaddr=0x12100000\0" \
|
|
"cfgscr=mw ${loadaddr} 0 128\0" \
|
|
"cfgscrl=fdt addr ${dtbaddr} &&"\
|
|
" sf probe; sf read ${cfgaddr} 0x40000 0x10000 && source ${cfgaddr}\0" \
|
|
"console=ttymxc0,115200n8 consoleblank=0 quiet\0" \
|
|
"t50args#0=setenv bootargs b_mode=${b_mode} console=${console} " \
|
|
" root=/dev/mmcblk0p2 rootfstype=ext4 rootwait panic=2 \0" \
|
|
"b_t50lgcy#0=" \
|
|
"load ${loaddev}:2 ${loadaddr} /boot/zImage && " \
|
|
"load ${loaddev}:2 ${dtbaddr} /boot/imx6dl-brppt50.dtb; " \
|
|
"run t50args#0; run cfgscrl; bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"t50args#1=setenv bootargs console=${console} b_mode=${b_mode}" \
|
|
" rootwait panic=2\0" \
|
|
"b_t50lgcy#1=" \
|
|
"load ${loaddev}:1 ${loadaddr} zImage && " \
|
|
"load ${loaddev}:1 ${dtbaddr} imx6dl-brppt50.dtb && " \
|
|
"load ${loaddev}:1 ${ramaddr} rootfsPPT50.uboot && " \
|
|
"run t50args#1; run cfgscrl; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0"\
|
|
"b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \
|
|
"b_mmc1=load ${loaddev}:1 ${scraddr} /boot/bootscr.img && source ${scraddr}\0" \
|
|
"b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \
|
|
"b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \
|
|
"b_tgts_std=mmc0 mmc1 t50lgcy#0 t50lgcy#1 usb0 net\0" \
|
|
"b_tgts_rcy=t50lgcy#1 usb0 net\0" \
|
|
"b_tgts_pme=net usb0 mmc0 mmc1\0" \
|
|
"b_mode=4\0" \
|
|
"b_break=0\0" \
|
|
"b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
|
|
" elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
|
|
" else setenv b_tgts ${b_tgts_std}; fi\0" \
|
|
"b_default=run b_deftgts; for target in ${b_tgts};"\
|
|
" do echo \"### booting ${target} ###\"; run b_${target};" \
|
|
" if test ${b_break} = 1; then; exit; fi; done\0" \
|
|
"loaddev=mmc 0\0" \
|
|
"altbootcmd=setenv b_mode 0; run b_default;\0" \
|
|
"bootlimit=1\0" \
|
|
"net2nor=sf probe && dhcp &&" \
|
|
" tftp ${loadaddr} SPL && sf erase 0 +${filesize} &&" \
|
|
" sf write ${loadaddr} 400 ${filesize} &&" \
|
|
" tftp ${loadaddr} u-boot-dtb.img && sf erase 0x100000 +${filesize} &&" \
|
|
" sf write ${loadaddr} 0x100000 ${filesize}\0"
|
|
|
|
/* RAM */
|
|
#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_FEC_FIXED_SPEED _1000BASET
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
|
|
/* SPL */
|
|
#ifdef CONFIG_SPL
|
|
#include "imx6_spl.h"
|
|
|
|
#endif /* CONFIG_SPL */
|
|
#endif /* __CONFIG_BRPP2_IMX6_H */
|