mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 02:03:09 +00:00
07c411346c
Currently, clock/reset setup for this device is handled by a platform-specific function and is intermixed with non-DM pinctrl setup. Use the devicetree to get clocks/resets, which disentagles it from the pinctrl setup in preparation for moving to DM_PINCTRL. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
233 lines
5.6 KiB
C
233 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Sunxi A31 Power Management Unit
|
|
*
|
|
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
|
|
* http://linux-sunxi.org
|
|
*
|
|
* Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
|
|
*
|
|
* (C) Copyright 2006-2013
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Berg Xing <bergxing@allwinnertech.com>
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
*/
|
|
|
|
#include <axp_pmic.h>
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <reset.h>
|
|
#include <time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/p2wi.h>
|
|
#include <asm/arch/prcm.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
static int sun6i_p2wi_await_trans(struct sunxi_p2wi_reg *base)
|
|
{
|
|
unsigned long tmo = timer_get_us() + 1000000;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
while (1) {
|
|
reg = readl(&base->status);
|
|
if (reg & P2WI_STAT_TRANS_ERR) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
if (reg & P2WI_STAT_TRANS_DONE) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
if (timer_get_us() > tmo) {
|
|
ret = -ETIME;
|
|
break;
|
|
}
|
|
}
|
|
writel(reg, &base->status); /* Clear status bits */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_p2wi_read(struct sunxi_p2wi_reg *base, const u8 addr, u8 *data)
|
|
{
|
|
int ret;
|
|
|
|
writel(P2WI_DATADDR_BYTE_1(addr), &base->dataddr0);
|
|
writel(P2WI_DATA_NUM_BYTES(1) |
|
|
P2WI_DATA_NUM_BYTES_READ, &base->numbytes);
|
|
writel(P2WI_STAT_TRANS_DONE, &base->status);
|
|
writel(P2WI_CTRL_TRANS_START, &base->ctrl);
|
|
|
|
ret = sun6i_p2wi_await_trans(base);
|
|
|
|
*data = readl(&base->data0) & P2WI_DATA_BYTE_1_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_p2wi_write(struct sunxi_p2wi_reg *base, const u8 addr, u8 data)
|
|
{
|
|
writel(P2WI_DATADDR_BYTE_1(addr), &base->dataddr0);
|
|
writel(P2WI_DATA_BYTE_1(data), &base->data0);
|
|
writel(P2WI_DATA_NUM_BYTES(1), &base->numbytes);
|
|
writel(P2WI_STAT_TRANS_DONE, &base->status);
|
|
writel(P2WI_CTRL_TRANS_START, &base->ctrl);
|
|
|
|
return sun6i_p2wi_await_trans(base);
|
|
}
|
|
|
|
static int sun6i_p2wi_change_to_p2wi_mode(struct sunxi_p2wi_reg *base,
|
|
u8 slave_addr, u8 ctrl_reg,
|
|
u8 init_data)
|
|
{
|
|
unsigned long tmo = timer_get_us() + 1000000;
|
|
|
|
writel(P2WI_PM_DEV_ADDR(slave_addr) |
|
|
P2WI_PM_CTRL_ADDR(ctrl_reg) |
|
|
P2WI_PM_INIT_DATA(init_data) |
|
|
P2WI_PM_INIT_SEND,
|
|
&base->pm);
|
|
|
|
while ((readl(&base->pm) & P2WI_PM_INIT_SEND)) {
|
|
if (timer_get_us() > tmo)
|
|
return -ETIME;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun6i_p2wi_init(struct sunxi_p2wi_reg *base)
|
|
{
|
|
/* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
|
|
writel(P2WI_CTRL_RESET, &base->ctrl);
|
|
sdelay(0x100);
|
|
writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
|
|
&base->cc);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_AXP_PMIC_BUS)
|
|
int p2wi_read(const u8 addr, u8 *data)
|
|
{
|
|
struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
|
|
|
|
return sun6i_p2wi_read(base, addr, data);
|
|
}
|
|
|
|
int p2wi_write(const u8 addr, u8 data)
|
|
{
|
|
struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
|
|
|
|
return sun6i_p2wi_write(base, addr, data);
|
|
}
|
|
|
|
int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
|
|
{
|
|
struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
|
|
|
|
return sun6i_p2wi_change_to_p2wi_mode(base, slave_addr, ctrl_reg,
|
|
init_data);
|
|
}
|
|
|
|
void p2wi_init(void)
|
|
{
|
|
struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
|
|
|
|
/* Enable p2wi and PIO clk, and de-assert their resets */
|
|
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
|
|
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
|
|
|
|
sun6i_p2wi_init(base);
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
struct sun6i_p2wi_priv {
|
|
struct sunxi_p2wi_reg *base;
|
|
};
|
|
|
|
static int sun6i_p2wi_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct sun6i_p2wi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* The hardware only supports SMBus-style transfers. */
|
|
if (nmsgs == 2 && msg[1].flags == I2C_M_RD && msg[1].len == 1)
|
|
return sun6i_p2wi_read(priv->base,
|
|
msg[0].buf[0], &msg[1].buf[0]);
|
|
|
|
if (nmsgs == 1 && msg[0].len == 2)
|
|
return sun6i_p2wi_write(priv->base,
|
|
msg[0].buf[0], msg[0].buf[1]);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sun6i_p2wi_probe_chip(struct udevice *bus, uint chip_addr,
|
|
uint chip_flags)
|
|
{
|
|
struct sun6i_p2wi_priv *priv = dev_get_priv(bus);
|
|
|
|
return sun6i_p2wi_change_to_p2wi_mode(priv->base, chip_addr,
|
|
AXP_PMIC_MODE_REG,
|
|
AXP_PMIC_MODE_P2WI);
|
|
}
|
|
|
|
static int sun6i_p2wi_probe(struct udevice *bus)
|
|
{
|
|
struct sun6i_p2wi_priv *priv = dev_get_priv(bus);
|
|
struct reset_ctl *reset;
|
|
struct clk *clk;
|
|
|
|
priv->base = dev_read_addr_ptr(bus);
|
|
|
|
reset = devm_reset_control_get(bus, NULL);
|
|
if (!IS_ERR(reset))
|
|
reset_deassert(reset);
|
|
|
|
clk = devm_clk_get(bus, NULL);
|
|
if (!IS_ERR(clk))
|
|
clk_enable(clk);
|
|
|
|
sun6i_p2wi_init(priv->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_p2wi_child_pre_probe(struct udevice *child)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_plat(child);
|
|
struct udevice *bus = child->parent;
|
|
|
|
/* Ensure each transfer is for a single register. */
|
|
chip->flags |= DM_I2C_CHIP_RD_ADDRESS | DM_I2C_CHIP_WR_ADDRESS;
|
|
|
|
return sun6i_p2wi_probe_chip(bus, chip->chip_addr, 0);
|
|
}
|
|
|
|
static const struct dm_i2c_ops sun6i_p2wi_ops = {
|
|
.xfer = sun6i_p2wi_xfer,
|
|
.probe_chip = sun6i_p2wi_probe_chip,
|
|
};
|
|
|
|
static const struct udevice_id sun6i_p2wi_ids[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-p2wi" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sun6i_p2wi) = {
|
|
.name = "sun6i_p2wi",
|
|
.id = UCLASS_I2C,
|
|
.of_match = sun6i_p2wi_ids,
|
|
.probe = sun6i_p2wi_probe,
|
|
.child_pre_probe = sun6i_p2wi_child_pre_probe,
|
|
.priv_auto = sizeof(struct sun6i_p2wi_priv),
|
|
.ops = &sun6i_p2wi_ops,
|
|
};
|
|
#endif /* CONFIG_IS_ENABLED(DM_I2C) */
|