mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
9d74f03460
There are many places in the U-Boot source tree which refer to CONFIG_SYS_COREBOOT, CONFIG_CBMEM_CONSOLE and CONFIG_VIDEO_COREBOOT that is currently defined in coreboot.h. Move them to arch/x86/cpu/coreboot/Kconfig so that we can switch to board configuration file to build U-Boot later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
359 lines
9.5 KiB
Text
359 lines
9.5 KiB
Text
menu "x86 architecture"
|
|
depends on X86
|
|
|
|
config SYS_ARCH
|
|
default "x86"
|
|
|
|
config USE_PRIVATE_LIBGCC
|
|
default y
|
|
|
|
choice
|
|
prompt "Target select"
|
|
|
|
config TARGET_COREBOOT
|
|
bool "Support coreboot"
|
|
help
|
|
This target is used for running U-Boot on top of Coreboot. In
|
|
this case Coreboot does the early inititalisation, and U-Boot
|
|
takes over once the RAM, video and CPU are fully running.
|
|
U-Boot is loaded as a fallback payload from Coreboot, in
|
|
Coreboot terminology. This method was used for the Chromebook
|
|
Pixel when launched.
|
|
|
|
config TARGET_CHROMEBOOK_LINK
|
|
bool "Support Chromebook link"
|
|
help
|
|
This is the Chromebook Pixel released in 2013. It uses an Intel
|
|
i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
|
|
SDRAM. It has a Panther Point platform controller hub, PCIe
|
|
WiFi and Bluetooth. It also includes a 720p webcam, USB SD
|
|
reader, microphone and speakers, display port and 32GB SATA
|
|
solid state drive. There is a Chrome OS EC connected on LPC,
|
|
and it provides a 2560x1700 high resolution touch-enabled LCD
|
|
display.
|
|
|
|
config TARGET_CROWNBAY
|
|
bool "Support Intel Crown Bay CRB"
|
|
help
|
|
This is the Intel Crown Bay Customer Reference Board. It contains
|
|
the Intel Atom Processor E6xx populated on the COM Express module
|
|
with 1GB DDR2 soldered down memory and a carrier board with the
|
|
Intel Platform Controller Hub EG20T, other system components and
|
|
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
|
|
|
|
endchoice
|
|
|
|
config RAMBASE
|
|
hex
|
|
default 0x100000
|
|
|
|
config XIP_ROM_SIZE
|
|
hex
|
|
depends on X86_RESET_VECTOR
|
|
default ROM_SIZE
|
|
|
|
config CPU_ADDR_BITS
|
|
int
|
|
default 36
|
|
|
|
config HPET_ADDRESS
|
|
hex
|
|
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
|
|
|
|
config SMM_TSEG
|
|
bool
|
|
default n
|
|
|
|
config SMM_TSEG_SIZE
|
|
hex
|
|
|
|
config X86_RESET_VECTOR
|
|
bool
|
|
default n
|
|
|
|
config SYS_X86_START16
|
|
hex
|
|
depends on X86_RESET_VECTOR
|
|
default 0xfffff800
|
|
|
|
config BOARD_ROMSIZE_KB_512
|
|
bool
|
|
config BOARD_ROMSIZE_KB_1024
|
|
bool
|
|
config BOARD_ROMSIZE_KB_2048
|
|
bool
|
|
config BOARD_ROMSIZE_KB_4096
|
|
bool
|
|
config BOARD_ROMSIZE_KB_8192
|
|
bool
|
|
config BOARD_ROMSIZE_KB_16384
|
|
bool
|
|
|
|
choice
|
|
prompt "ROM chip size"
|
|
depends on X86_RESET_VECTOR
|
|
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
|
|
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
|
|
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
|
|
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
|
|
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
|
|
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
|
|
help
|
|
Select the size of the ROM chip you intend to flash U-Boot on.
|
|
|
|
The build system will take care of creating a u-boot.rom file
|
|
of the matching size.
|
|
|
|
config UBOOT_ROMSIZE_KB_512
|
|
bool "512 KB"
|
|
help
|
|
Choose this option if you have a 512 KB ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_1024
|
|
bool "1024 KB (1 MB)"
|
|
help
|
|
Choose this option if you have a 1024 KB (1 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_2048
|
|
bool "2048 KB (2 MB)"
|
|
help
|
|
Choose this option if you have a 2048 KB (2 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_4096
|
|
bool "4096 KB (4 MB)"
|
|
help
|
|
Choose this option if you have a 4096 KB (4 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_8192
|
|
bool "8192 KB (8 MB)"
|
|
help
|
|
Choose this option if you have a 8192 KB (8 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_16384
|
|
bool "16384 KB (16 MB)"
|
|
help
|
|
Choose this option if you have a 16384 KB (16 MB) ROM chip.
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config UBOOT_ROMSIZE_KB
|
|
int
|
|
default 512 if UBOOT_ROMSIZE_KB_512
|
|
default 1024 if UBOOT_ROMSIZE_KB_1024
|
|
default 2048 if UBOOT_ROMSIZE_KB_2048
|
|
default 4096 if UBOOT_ROMSIZE_KB_4096
|
|
default 8192 if UBOOT_ROMSIZE_KB_8192
|
|
default 16384 if UBOOT_ROMSIZE_KB_16384
|
|
|
|
# Map the config names to a hex value (bytes).
|
|
config ROM_SIZE
|
|
hex
|
|
default 0x80000 if UBOOT_ROMSIZE_KB_512
|
|
default 0x100000 if UBOOT_ROMSIZE_KB_1024
|
|
default 0x200000 if UBOOT_ROMSIZE_KB_2048
|
|
default 0x400000 if UBOOT_ROMSIZE_KB_4096
|
|
default 0x800000 if UBOOT_ROMSIZE_KB_8192
|
|
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
|
|
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
|
|
|
|
config HAVE_INTEL_ME
|
|
bool "Platform requires Intel Management Engine"
|
|
help
|
|
Newer higher-end devices have an Intel Management Engine (ME)
|
|
which is a very large binary blob (typically 1.5MB) which is
|
|
required for the platform to work. This enforces a particular
|
|
SPI flash format. You will need to supply the me.bin file in
|
|
your board directory.
|
|
|
|
config X86_RAMTEST
|
|
bool "Perform a simple RAM test after SDRAM initialisation"
|
|
help
|
|
If there is something wrong with SDRAM then the platform will
|
|
often crash within U-Boot or the kernel. This option enables a
|
|
very simple RAM test that quickly checks whether the SDRAM seems
|
|
to work correctly. It is not exhaustive but can save time by
|
|
detecting obvious failures.
|
|
|
|
config MARK_GRAPHICS_MEM_WRCOMB
|
|
bool "Mark graphics memory as write-combining."
|
|
default n
|
|
help
|
|
The graphics performance may increase if the graphics
|
|
memory is set as write-combining cache type. This option
|
|
enables marking the graphics memory as write-combining.
|
|
|
|
menu "Display"
|
|
|
|
config FRAMEBUFFER_SET_VESA_MODE
|
|
prompt "Set framebuffer graphics resolution"
|
|
bool
|
|
help
|
|
Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console)
|
|
|
|
choice
|
|
prompt "framebuffer graphics resolution"
|
|
default FRAMEBUFFER_VESA_MODE_117
|
|
depends on FRAMEBUFFER_SET_VESA_MODE
|
|
help
|
|
This option sets the resolution used for the coreboot framebuffer (and
|
|
bootsplash screen).
|
|
|
|
config FRAMEBUFFER_VESA_MODE_100
|
|
bool "640x400 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_101
|
|
bool "640x480 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_102
|
|
bool "800x600 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_103
|
|
bool "800x600 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_104
|
|
bool "1024x768 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_105
|
|
bool "1024x7686 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_106
|
|
bool "1280x1024 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_107
|
|
bool "1280x1024 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_108
|
|
bool "80x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_109
|
|
bool "132x25 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10A
|
|
bool "132x43 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10B
|
|
bool "132x50 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10C
|
|
bool "132x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10D
|
|
bool "320x200 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10E
|
|
bool "320x200 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10F
|
|
bool "320x200 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_110
|
|
bool "640x480 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_111
|
|
bool "640x480 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_112
|
|
bool "640x480 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_113
|
|
bool "800x600 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_114
|
|
bool "800x600 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_115
|
|
bool "800x600 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_116
|
|
bool "1024x768 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_117
|
|
bool "1024x768 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_118
|
|
bool "1024x768 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_119
|
|
bool "1280x1024 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11A
|
|
bool "1280x1024 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11B
|
|
bool "1280x1024 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_USER
|
|
bool "Manually select VESA mode"
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config FRAMEBUFFER_VESA_MODE
|
|
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
|
|
hex
|
|
default 0x100 if FRAMEBUFFER_VESA_MODE_100
|
|
default 0x101 if FRAMEBUFFER_VESA_MODE_101
|
|
default 0x102 if FRAMEBUFFER_VESA_MODE_102
|
|
default 0x103 if FRAMEBUFFER_VESA_MODE_103
|
|
default 0x104 if FRAMEBUFFER_VESA_MODE_104
|
|
default 0x105 if FRAMEBUFFER_VESA_MODE_105
|
|
default 0x106 if FRAMEBUFFER_VESA_MODE_106
|
|
default 0x107 if FRAMEBUFFER_VESA_MODE_107
|
|
default 0x108 if FRAMEBUFFER_VESA_MODE_108
|
|
default 0x109 if FRAMEBUFFER_VESA_MODE_109
|
|
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
|
|
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
|
|
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
|
|
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
|
|
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
|
|
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
|
|
default 0x110 if FRAMEBUFFER_VESA_MODE_110
|
|
default 0x111 if FRAMEBUFFER_VESA_MODE_111
|
|
default 0x112 if FRAMEBUFFER_VESA_MODE_112
|
|
default 0x113 if FRAMEBUFFER_VESA_MODE_113
|
|
default 0x114 if FRAMEBUFFER_VESA_MODE_114
|
|
default 0x115 if FRAMEBUFFER_VESA_MODE_115
|
|
default 0x116 if FRAMEBUFFER_VESA_MODE_116
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_117
|
|
default 0x118 if FRAMEBUFFER_VESA_MODE_118
|
|
default 0x119 if FRAMEBUFFER_VESA_MODE_119
|
|
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
|
|
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
|
|
|
|
endmenu
|
|
|
|
config TSC_CALIBRATION_BYPASS
|
|
bool "Bypass Time-Stamp Counter (TSC) calibration"
|
|
default n
|
|
help
|
|
By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
|
|
running frequency via Model-Specific Register (MSR) and Programmable
|
|
Interval Timer (PIT). If the calibration does not work on your board,
|
|
select this option and provide a hardcoded TSC running frequency with
|
|
CONFIG_TSC_FREQ_IN_MHZ below.
|
|
|
|
Normally this option should be turned on in a simulation environment
|
|
like qemu.
|
|
|
|
config TSC_FREQ_IN_MHZ
|
|
int "Time-Stamp Counter (TSC) running frequency in MHz"
|
|
depends on TSC_CALIBRATION_BYPASS
|
|
default 1000
|
|
help
|
|
The running frequency in MHz of Time-Stamp Counter (TSC).
|
|
|
|
source "arch/x86/cpu/coreboot/Kconfig"
|
|
|
|
source "arch/x86/cpu/ivybridge/Kconfig"
|
|
|
|
source "arch/x86/cpu/queensbay/Kconfig"
|
|
|
|
source "board/coreboot/coreboot/Kconfig"
|
|
|
|
source "board/google/chromebook_link/Kconfig"
|
|
|
|
source "board/intel/crownbay/Kconfig"
|
|
|
|
endmenu
|