mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-24 08:22:14 +00:00
65cc0e2a65
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
111 lines
3.4 KiB
C
111 lines
3.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015 Timesys Corporation
|
|
* Copyright (C) 2015 General Electric Company
|
|
* Copyright (C) 2014 Advantech
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the GE MX6Q Bx50v3 boards.
|
|
*/
|
|
|
|
#ifndef __GE_BX50V3_CONFIG_H
|
|
#define __GE_BX50V3_CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/mach-imx/gpio.h>
|
|
|
|
#include "mx6_common.h"
|
|
#include <linux/sizes.h>
|
|
|
|
#ifdef CONFIG_CMD_NFS
|
|
#define NETWORKBOOT \
|
|
"setnetworkboot=" \
|
|
"setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
|
|
"setenv gatewayip 172.16.2.20; setenv nfsserver 172.16.2.20; " \
|
|
"setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
|
|
"setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
|
|
"setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
|
|
"setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
|
|
"setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
|
|
"setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
|
|
"networkboot=" \
|
|
"run setnetworkboot; " \
|
|
"nfs ${loadaddr} /srv/nfs/fitImage; " \
|
|
"bootm ${loadaddr}\0" \
|
|
|
|
#define NETWORKBOOTCOMMAND \
|
|
"run networkboot; " \
|
|
|
|
#else
|
|
#define NETWORKBOOT \
|
|
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
NETWORKBOOT \
|
|
"image=/boot/fitImage\0" \
|
|
"dev=mmc\0" \
|
|
"devnum=2\0" \
|
|
"rootdev=mmcblk0p\0" \
|
|
"quiet=quiet loglevel=0\0" \
|
|
"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
|
|
"ro rootwait cma=128M " \
|
|
"bootcause=${bootcause} " \
|
|
"${quiet} " \
|
|
"${videoargs}" "\0" \
|
|
"doquiet=" \
|
|
"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
|
|
"then setenv quiet; fi\0" \
|
|
"hasfirstboot=" \
|
|
"test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
|
|
"swappartitions=" \
|
|
"setexpr partnum 3 - ${partnum}\0" \
|
|
"failbootcmd=" \
|
|
"cls; " \
|
|
"setcurs 5 4; " \
|
|
"lcdputs \"Monitor failed to start. " \
|
|
"Try again, or contact GE Service for support.\"; " \
|
|
"bootcount reset; " \
|
|
"while true; do sleep 1; done; \0" \
|
|
"altbootcmd=" \
|
|
"run doquiet; " \
|
|
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
|
|
"run hasfirstboot || setenv partnum 0; " \
|
|
"if test ${partnum} != 0; then " \
|
|
"run swappartitions loadimage doboot; " \
|
|
"fi; " \
|
|
"run failbootcmd\0" \
|
|
"loadimage=" \
|
|
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
|
|
"doboot=" \
|
|
"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
|
|
"run setargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"tryboot=" \
|
|
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
|
|
"run loadimage || run swappartitions && run loadimage || " \
|
|
"setenv partnum 0 && echo MISSING IMAGE;" \
|
|
"run doboot; " \
|
|
"run failbootcmd\0" \
|
|
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CFG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
|
|
|
|
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
/* environment organization */
|
|
|
|
#define CFG_SYS_FSL_USDHC_NUM 3
|
|
|
|
/* Framebuffer */
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
|
|
#define CONFIG_IMX6_PWM_PER_CLK 66000000
|
|
|
|
#endif /* __GE_BX50V3_CONFIG_H */
|