u-boot/board/amlogic/vim3/vim3.c
Simon Glass 7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00

181 lines
4.4 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2020 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <common.h>
#include <dm.h>
#include <env_internal.h>
#include <init.h>
#include <net.h>
#include <asm/io.h>
#include <asm/arch/boot.h>
#include <asm/arch/eth.h>
#include <asm/arch/sm.h>
#include <asm/global_data.h>
#include <i2c.h>
#include "khadas-mcu.h"
int mmc_get_env_dev(void)
{
switch (meson_get_boot_device()) {
case BOOT_DEVICE_EMMC:
return 2;
case BOOT_DEVICE_SD:
return 1;
default:
/* boot device is not EMMC|SD */
return -1;
}
}
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
* an USB3.0 Type A connector and a M.2 Key M slot.
* The PHY driving these differential lines is shared between
* the USB3.0 controller and the PCIe Controller, thus only
* a single controller can use it.
*/
int meson_ft_board_setup(void *blob, struct bd_info *bd)
{
struct udevice *bus, *dev;
int node, i2c_node, ret;
unsigned int i2c_addr;
u32 *val;
/* Find I2C device */
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "khadas,mcu");
if (node < 0) {
printf("vim3: cannot find khadas,mcu node\n");
return 0;
}
/* Get addr */
val = (u32 *)fdt_getprop(gd->fdt_blob, node, "reg", NULL);
if (!val) {
printf("vim3: cannot find khadas,mcu node i2c addr\n");
return 0;
}
i2c_addr = fdt32_to_cpu(*val);
/* Get i2c device */
i2c_node = fdt_parent_offset(gd->fdt_blob, node);
if (node < 0) {
printf("vim3: cannot find khadas,mcu i2c node\n");
return 0;
}
ret = uclass_get_device_by_of_offset(UCLASS_I2C, i2c_node, &bus);
if (ret < 0) {
printf("vim3: cannot find i2c bus (%d)\n", ret);
return 0;
}
ret = i2c_get_chip(bus, i2c_addr, 1, &dev);
if (ret < 0) {
printf("vim3: cannot find i2c chip (%d)\n", ret);
return 0;
}
/* Read USB_PCIE_SWITCH_REG */
ret = dm_i2c_reg_read(dev, KHADAS_MCU_USB_PCIE_SWITCH_REG);
if (ret < 0) {
printf("vim3: failed to read i2c reg (%d)\n", ret);
return 0;
}
debug("MCU_USB_PCIE_SWITCH_REG: %d\n", ret);
/*
* If in PCIe mode, alter DT
* 0Enable USB3.0Disable PCIE, 1Disable USB3.0, Enable PCIE
*/
if (ret > 0) {
static char data[32] __aligned(4);
const void *ptmp;
int len;
/* Find USB node */
node = fdt_node_offset_by_compatible(blob, -1, "amlogic,meson-g12a-usb-ctrl");
if (node < 0) {
printf("vim3: cannot find amlogic,meson-g12a-usb-ctrl node\n");
return 0;
}
/* Update PHY names (mandatory to disable USB3.0) */
len = strlcpy(data, "usb2-phy0", 32);
len += strlcpy(&data[len], "usb2-phy1", 32 - len);
ret = fdt_setprop(blob, node, "phy-names", data, len);
if (ret < 0) {
printf("vim3: failed to update usb phy names property (%d)\n", ret);
return 0;
}
/* Update PHY list, by keeping the 2 first entries (optional) */
ptmp = fdt_getprop(blob, node, "phys", &len);
if (ptmp) {
memcpy(data, ptmp, min_t(unsigned int, 2 * sizeof(u32), len));
ret = fdt_setprop(blob, node, "phys", data,
min_t(unsigned int, 2 * sizeof(u32), len));
if (ret < 0)
printf("vim3: failed to update usb phys property (%d)\n", ret);
} else
printf("vim3: cannot find usb node phys property\n");
/* Find PCIe node */
node = fdt_node_offset_by_compatible(blob, -1, "amlogic,g12a-pcie");
if (node < 0) {
printf("vim3: cannot find amlogic,g12a-pcie node\n");
return 0;
}
/* Enable PCIe */
len = strlcpy(data, "okay", 32);
ret = fdt_setprop(blob, node, "status", data, len);
if (ret < 0) {
printf("vim3: failed to enable pcie node (%d)\n", ret);
return 0;
}
printf("vim3: successfully enabled PCIe\n");
}
return 0;
}
#define EFUSE_MAC_OFFSET 0
#define EFUSE_MAC_SIZE 12
#define MAC_ADDR_LEN 6
int misc_init_r(void)
{
u8 mac_addr[MAC_ADDR_LEN];
char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
ssize_t len;
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
efuse_mac_addr, EFUSE_MAC_SIZE);
if (len != EFUSE_MAC_SIZE)
return 0;
/* MAC is stored in ASCII format, 1bytes = 2characters */
for (int i = 0; i < 6; i++) {
tmp[0] = efuse_mac_addr[i * 2];
tmp[1] = efuse_mac_addr[i * 2 + 1];
tmp[2] = '\0';
mac_addr[i] = hextoul(tmp, NULL);
}
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("ethaddr", mac_addr);
else
meson_generate_serial_ethaddr();
eth_env_get_enetaddr("ethaddr", mac_addr);
}
return 0;
}