mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
16b94903e2
Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
328 lines
6 KiB
ArmAsm
328 lines
6 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (c) 2018 Stefan Roese <sr@denx.de>
|
|
*
|
|
* This code is mostly based on the code extracted from this MediaTek
|
|
* github repository:
|
|
*
|
|
* https://github.com/MediaTek-Labs/linkit-smart-uboot.git
|
|
*
|
|
* I was not able to find a specific license or other developers
|
|
* copyrights here, so I can't add them here.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/regdef.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/asm.h>
|
|
#include "mt76xx.h"
|
|
|
|
#ifndef BIT
|
|
#define BIT(nr) (1 << (nr))
|
|
#endif
|
|
|
|
#define DELAY_USEC(us) ((us) / 100)
|
|
|
|
#define DDR_CFG1_CHIP_WIDTH_MASK (0x3 << 16)
|
|
#define DDR_CFG1_BUS_WIDTH_MASK (0x3 << 12)
|
|
|
|
#if defined(CONFIG_ONBOARD_DDR2_SIZE_256MBIT)
|
|
#define DDR_CFG1_SIZE_VAL 0x222e2323
|
|
#define DDR_CFG4_SIZE_VAL 7
|
|
#endif
|
|
#if defined(CONFIG_ONBOARD_DDR2_SIZE_512MBIT)
|
|
#define DDR_CFG1_SIZE_VAL 0x22322323
|
|
#define DDR_CFG4_SIZE_VAL 9
|
|
#endif
|
|
#if defined(CONFIG_ONBOARD_DDR2_SIZE_1024MBIT)
|
|
#define DDR_CFG1_SIZE_VAL 0x22362323
|
|
#define DDR_CFG4_SIZE_VAL 9
|
|
#endif
|
|
#if defined(CONFIG_ONBOARD_DDR2_SIZE_2048MBIT)
|
|
#define DDR_CFG1_SIZE_VAL 0x223a2323
|
|
#define DDR_CFG4_SIZE_VAL 9
|
|
#endif
|
|
|
|
#if defined(CONFIG_ONBOARD_DDR2_CHIP_WIDTH_8BIT)
|
|
#define DDR_CFG1_CHIP_WIDTH_VAL (0x1 << 16)
|
|
#endif
|
|
#if defined(CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT)
|
|
#define DDR_CFG1_CHIP_WIDTH_VAL (0x2 << 16)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ONBOARD_DDR2_BUS_WIDTH_16BIT)
|
|
#define DDR_CFG1_BUS_WIDTH_VAL (0x2 << 12)
|
|
#endif
|
|
#if defined(CONFIG_ONBOARD_DDR2_BUS_WIDTH_32BIT)
|
|
#define DDR_CFG1_BUS_WIDTH_VAL (0x3 << 12)
|
|
#endif
|
|
|
|
.set noreorder
|
|
|
|
LEAF(lowlevel_init)
|
|
|
|
/* Load base addresses as physical addresses for later usage */
|
|
li s0, CKSEG1ADDR(MT76XX_SYSCTL_BASE)
|
|
li s1, CKSEG1ADDR(MT76XX_MEMCTRL_BASE)
|
|
li s2, CKSEG1ADDR(MT76XX_RGCTRL_BASE)
|
|
|
|
/* polling CPLL is ready */
|
|
li t1, DELAY_USEC(1000000)
|
|
la t5, MT76XX_ROM_STATUS_REG
|
|
1:
|
|
lw t2, 0(t5)
|
|
andi t2, t2, 0x1
|
|
bnez t2, CPLL_READY
|
|
subu t1, t1, 1
|
|
bgtz t1, 1b
|
|
nop
|
|
la t0, MT76XX_CLKCFG0_REG
|
|
lw t3, 0(t0)
|
|
ori t3, t3, 0x1
|
|
sw t3, 0(t0)
|
|
b CPLL_DONE
|
|
nop
|
|
CPLL_READY:
|
|
la t0, MT76XX_CLKCFG0_REG
|
|
lw t1, 0(t0)
|
|
li t2, ~0x0c
|
|
and t1, t1, t2
|
|
ori t1, t1, 0xc
|
|
sw t1, 0(t0)
|
|
la t0, MT76XX_DYN_CFG0_REG
|
|
lw t3, 0(t0)
|
|
li t5, ~((0x0f << 8) | (0x0f << 0))
|
|
and t3, t3, t5
|
|
li t5, (10 << 8) | (1 << 0)
|
|
or t3, t3, t5
|
|
sw t3, 0(t0)
|
|
la t0, MT76XX_CLKCFG0_REG
|
|
lw t3, 0(t0)
|
|
li t4, ~0x0F
|
|
and t3, t3, t4
|
|
ori t3, t3, 0xc
|
|
sw t3, 0(t0)
|
|
lw t3, 0(t0)
|
|
ori t3, t3, 0x08
|
|
sw t3, 0(t0)
|
|
|
|
CPLL_DONE:
|
|
/* Reset MC */
|
|
lw t2, 0x34(s0)
|
|
ori t2, BIT(10)
|
|
sw t2, 0x34(s0)
|
|
nop
|
|
|
|
/*
|
|
* SDR and DDR initialization: delay 200us
|
|
*/
|
|
li t0, DELAY_USEC(200 + 40)
|
|
li t1, 0x1
|
|
1:
|
|
sub t0, t0, t1
|
|
bnez t0, 1b
|
|
nop
|
|
|
|
/* set DRAM IO PAD for MT7628IC */
|
|
/* DDR LDO Enable */
|
|
lw t4, 0x100(s2)
|
|
li t2, BIT(31)
|
|
or t4, t4, t2
|
|
sw t4, 0x100(s2)
|
|
lw t4, 0x10c(s2)
|
|
j LDO_1P8V
|
|
nop
|
|
LDO_1P8V:
|
|
li t2, ~BIT(6)
|
|
and t4, t4, t2
|
|
sw t4, 0x10c(s2)
|
|
j DDRLDO_SOFT_START
|
|
LDO_2P5V:
|
|
/* suppose external DDR1 LDO 2.5V */
|
|
li t2, BIT(6)
|
|
or t4, t4, t2
|
|
sw t4, 0x10c(s2)
|
|
|
|
DDRLDO_SOFT_START:
|
|
lw t2, 0x10c(s2)
|
|
li t3, BIT(16)
|
|
or t2, t2, t3
|
|
sw t2, 0x10c(s2)
|
|
li t3, DELAY_USEC(250*50)
|
|
LDO_DELAY:
|
|
subu t3, t3, 1
|
|
bnez t3, LDO_DELAY
|
|
nop
|
|
|
|
lw t2, 0x10c(s2)
|
|
li t3, BIT(18)
|
|
or t2, t2, t3
|
|
sw t2, 0x10c(s2)
|
|
|
|
SET_RG_BUCK_FPWM:
|
|
lw t2, 0x104(s2)
|
|
ori t2, t2, BIT(10)
|
|
sw t2, 0x104(s2)
|
|
|
|
DDR_PAD_CFG:
|
|
/* clean CLK PAD */
|
|
lw t2, 0x704(s2)
|
|
li t8, 0xfffff0f0
|
|
and t2, t2, t8
|
|
/* clean CMD PAD */
|
|
lw t3, 0x70c(s2)
|
|
li t8, 0xfffff0f0
|
|
and t3, t3, t8
|
|
/* clean DQ IPAD */
|
|
lw t4, 0x710(s2)
|
|
li t8, 0xfffff8ff
|
|
and t4, t4, t8
|
|
/* clean DQ OPAD */
|
|
lw t5, 0x714(s2)
|
|
li t8, 0xfffff0f0
|
|
and t5, t5, t8
|
|
/* clean DQS IPAD */
|
|
lw t6, 0x718(s2)
|
|
li t8, 0xfffff8ff
|
|
and t6, t6, t8
|
|
/* clean DQS OPAD */
|
|
lw t7, 0x71c(s2)
|
|
li t8, 0xfffff0f0
|
|
and t7, t7, t8
|
|
|
|
lw t9, 0xc(s0)
|
|
srl t9, t9, 16
|
|
andi t9, t9, 0x1
|
|
bnez t9, MT7628_AN_DDR1_PAD
|
|
MT7628_KN_PAD:
|
|
li t8, 0x00000303
|
|
or t2, t2, t8
|
|
or t3, t3, t8
|
|
or t5, t5, t8
|
|
or t7, t7, t8
|
|
li t8, 0x00000000
|
|
or t4, t4, t8
|
|
or t6, t6, t8
|
|
j SET_PAD_CFG
|
|
MT7628_AN_DDR1_PAD:
|
|
lw t1, 0x10(s0)
|
|
andi t1, t1, 0x1
|
|
beqz t1, MT7628_AN_DDR2_PAD
|
|
li t8, 0x00000c0c
|
|
or t2, t2, t8
|
|
li t8, 0x00000202
|
|
or t3, t3, t8
|
|
li t8, 0x00000707
|
|
or t5, t5, t8
|
|
li t8, 0x00000c0c
|
|
or t7, t7, t8
|
|
li t8, 0x00000000
|
|
or t4, t4, t8
|
|
or t6, t6, t8
|
|
j SET_PAD_CFG
|
|
MT7628_AN_DDR2_PAD:
|
|
li t8, 0x00000c0c
|
|
or t2, t2, t8
|
|
li t8, 0x00000202
|
|
or t3, t3, t8
|
|
li t8, 0x00000404
|
|
or t5, t5, t8
|
|
li t8, 0x00000c0c
|
|
or t7, t7, t8
|
|
li t8, 0x00000000 /* ODT off */
|
|
or t4, t4, t8
|
|
or t6, t6, t8
|
|
|
|
SET_PAD_CFG:
|
|
sw t2, 0x704(s2)
|
|
sw t3, 0x70c(s2)
|
|
sw t4, 0x710(s2)
|
|
sw t5, 0x714(s2)
|
|
sw t6, 0x718(s2)
|
|
sw t7, 0x71c(s2)
|
|
|
|
/*
|
|
* DDR initialization: reset pin to 0
|
|
*/
|
|
lw t2, 0x34(s0)
|
|
and t2, ~BIT(10)
|
|
sw t2, 0x34(s0)
|
|
nop
|
|
|
|
/*
|
|
* DDR initialization: wait til reg DDR_CFG1 bit 21 equal to 1 (ready)
|
|
*/
|
|
DDR_READY:
|
|
li t1, DDR_CFG1_REG
|
|
lw t0, 0(t1)
|
|
nop
|
|
and t2, t0, BIT(21)
|
|
beqz t2, DDR_READY
|
|
nop
|
|
|
|
/*
|
|
* DDR initialization
|
|
*
|
|
* Only DDR2 supported right now. DDR2 support can be added, once
|
|
* boards using it will get added to mainline U-Boot.
|
|
*/
|
|
li t1, DDR_CFG2_REG
|
|
lw t0, 0(t1)
|
|
nop
|
|
and t0, ~BIT(30)
|
|
and t0, ~(7 << 4)
|
|
or t0, (4 << 4)
|
|
or t0, BIT(30)
|
|
or t0, BIT(11)
|
|
sw t0, 0(t1)
|
|
nop
|
|
|
|
li t1, DDR_CFG3_REG
|
|
lw t2, 0(t1)
|
|
/* Disable ODT; reference board ok, ev board fail */
|
|
and t2, ~BIT(6)
|
|
or t2, BIT(2)
|
|
li t0, DDR_CFG4_REG
|
|
lw t1, 0(t0)
|
|
li t2, ~(0x01f | 0x0f0)
|
|
and t1, t1, t2
|
|
ori t1, t1, DDR_CFG4_SIZE_VAL
|
|
sw t1, 0(t0)
|
|
nop
|
|
|
|
/*
|
|
* DDR initialization: config size and width on reg DDR_CFG1
|
|
*/
|
|
li t6, DDR_CFG1_SIZE_VAL
|
|
|
|
and t6, ~DDR_CFG1_CHIP_WIDTH_MASK
|
|
or t6, DDR_CFG1_CHIP_WIDTH_VAL
|
|
|
|
/* CONFIG DDR_CFG1[13:12] about TOTAL WIDTH */
|
|
and t6, ~DDR_CFG1_BUS_WIDTH_MASK
|
|
or t6, DDR_CFG1_BUS_WIDTH_VAL
|
|
|
|
li t5, DDR_CFG1_REG
|
|
sw t6, 0(t5)
|
|
nop
|
|
|
|
/*
|
|
* DDR: enable self auto refresh for power saving
|
|
* enable it by default for both RAM and ROM version (for CoC)
|
|
*/
|
|
lw t1, 0x14(s1)
|
|
nop
|
|
and t1, 0xff000000
|
|
or t1, 0x01
|
|
sw t1, 0x14(s1)
|
|
nop
|
|
lw t1, 0x10(s1)
|
|
nop
|
|
or t1, 0x10
|
|
sw t1, 0x10(s1)
|
|
nop
|
|
|
|
jr ra
|
|
nop
|
|
END(lowlevel_init)
|