u-boot/arch/mips/mach-mt7620/cpu.c
Stefan Roese a5f50e0114 mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issues
It has been noticed, that sometimes the d-cache is not in a
"clean-state" when U-Boot is running on MT7688. This was detected when
using the ethernet driver (which uses d-cache) and a TFTP command does
not complete. Flushing the complete d-cache (again?) here seems to fix
this issue.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19 15:23:01 +01:00

121 lines
2.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <dm.h>
#include <ram.h>
#include <wdt.h>
#include <asm/io.h>
#include <linux/io.h>
#include <linux/sizes.h>
#include "mt76xx.h"
#define STR_LEN 6
#ifdef CONFIG_BOOT_ROM
int mach_cpu_init(void)
{
ddr_calibrate();
return 0;
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
return 0;
}
int print_cpuinfo(void)
{
static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
"PLL (4-Byte SPI Addr)",
"XTAL (3-Byte SPI Addr)",
"XTAL (4-Byte SPI Addr)" };
const void *blob = gd->fdt_blob;
void __iomem *sysc_base;
char buf[STR_LEN + 1];
fdt_addr_t base;
fdt_size_t size;
char *str;
int node;
u32 val;
/* Get system controller base address */
node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
if (node < 0)
return -FDT_ERR_NOTFOUND;
base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
0, &size, true);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
sysc_base = ioremap_nocache(base, size);
str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
snprintf(buf, STR_LEN + 1, "%s", str);
val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
printf("CPU: %-*s Rev %ld.%ld - ", STR_LEN, buf,
(val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
printf("Boot from %s\n", boot_str[val]);
return 0;
}
#ifdef CONFIG_WATCHDOG
static struct udevice *watchdog_dev;
/* Called by macro WATCHDOG_RESET */
void watchdog_reset(void)
{
static ulong next_reset;
ulong now;
if (!watchdog_dev)
return;
now = get_timer(0);
/* Do not reset the watchdog too often */
if (now > next_reset) {
next_reset = now + 1000; /* reset every 1000ms */
wdt_reset(watchdog_dev);
}
}
#endif
int arch_misc_init(void)
{
/*
* It has been noticed, that sometimes the d-cache is not in a
* "clean-state" when U-Boot is running on MT7688. This was
* detected when using the ethernet driver (which uses d-cache)
* and a TFTP command does not complete. Flushing the complete
* d-cache (again?) here seems to fix this issue.
*/
flush_dcache_range(gd->bd->bi_memstart,
gd->bd->bi_memstart + gd->ram_size - 1);
#ifdef CONFIG_WATCHDOG
/* Init watchdog */
if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
debug("Watchdog: Not found by seq!\n");
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
puts("Watchdog: Not found!\n");
return 0;
}
}
wdt_start(watchdog_dev, 60000, 0); /* 60 seconds */
printf("Watchdog: Started\n");
#endif
return 0;
}