Kishon Vijay Abraham I 2d28eeda33 mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions ... AM572x SR1.1 requires different IODelay values to be used than that used in AM572x SR2.0. These values are populated in device tree. Add capability in omap_hsmmc driver to extract IOdelay values for different silicon revision. The maximum frequency is also reduced when using a ES1.1. To keep the ability to boot both revsions with the same dtb, those values can be provided by the platform code. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>		2018-02-19 16:58:55 +09:00
..
clock.h	board: ti: dra76-evm: Add the pmic data	2017-09-11 16:19:40 -04:00
cpu.h	ti: wdt: omap5: Define WDT_BASE for omap5+ SoC	2017-04-08 21:32:49 -04:00
dra7xx_iodelay.h	ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot	2018-02-19 16:58:55 +09:00
ehci.h	arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier	2013-09-20 10:30:54 -04:00
gpio.h	ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro	2017-03-20 17:56:21 -04:00
hardware.h	ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX	2016-12-03 13:21:11 -05:00
i2c.h	Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig	2017-09-01 20:44:30 -04:00
mem.h	board/ti/dra7xx: add support for parallel NOR	2014-08-25 10:48:12 -04:00
mmc_host_def.h	omap: Update the base address of the MMC controllers	2018-01-18 22:04:21 -05:00
mux_dra7xx.h	board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM	2018-01-19 15:49:23 -05:00
mux_omap5.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
omap.h	arm: dra762: Add support for device package identification	2018-01-19 15:49:26 -05:00
sata.h	ARM: O5/dra7xx: Add SATA boot support	2014-02-19 10:47:45 -05:00
spl.h	dra7x: boot: add dfu bootmode support	2016-09-27 23:30:20 +02:00
sys_proto.h	mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions	2018-02-19 16:58:55 +09:00