mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
96ac18c9cc
Update following DDR related settings for T1040RDB, T1042RDB_PI -Correct number of chip selects to two as t1040 supports two Chip selects. -Update board_specific_parameters udimm structure with settings derived via calibration. -Update ddr_raw_timing sructure corresponding to DIMM. -Set ODT to off. Typically on FSL board, ODT is set to 75 ohm, but on T104xRDB, on setting this , DDR instability is observed. Board-level debugging is in progress. Verified the updated settings to be working fine with dual-ranked Micron, MT18KSF51272AZ-1G6 DIMM at data rate 1600MT/s. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
78 lines
1.9 KiB
C
78 lines
1.9 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __DDR_H__
|
|
#define __DDR_H__
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 2,
|
|
.rank_density = 2147483648u,
|
|
.capacity = 4294967296u,
|
|
.primary_sdram_width = 64,
|
|
.ec_sdram_width = 8,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 2, /* ECC */
|
|
.burst_lengths_bitmask = 0x0c,
|
|
.tckmin_x_ps = 1071,
|
|
.caslat_x = 0xfe << 4, /* 5,6,7,8,9,10,11 */
|
|
.taa_ps = 13125,
|
|
.twr_ps = 15000,
|
|
.trcd_ps = 13125,
|
|
.trrd_ps = 6000,
|
|
.trp_ps = 13125,
|
|
.tras_ps = 34000,
|
|
.trc_ps = 48125,
|
|
.trfc_ps = 260000,
|
|
.twtr_ps = 7500,
|
|
.trtp_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tfaw_ps = 35000,
|
|
};
|
|
|
|
struct board_specific_parameters {
|
|
u32 n_ranks;
|
|
u32 datarate_mhz_high;
|
|
u32 rank_gb;
|
|
u32 clk_adjust;
|
|
u32 wrlvl_start;
|
|
u32 wrlvl_ctl_2;
|
|
u32 wrlvl_ctl_3;
|
|
};
|
|
|
|
/*
|
|
* These tables contain all valid speeds we want to override with board
|
|
* specific parameters. datarate_mhz_high values need to be in ascending order
|
|
* for each n_ranks group.
|
|
*/
|
|
|
|
static const struct board_specific_parameters udimm0[] = {
|
|
/*
|
|
* memory controller 0
|
|
* num| hi| rank| clk| wrlvl | wrlvl
|
|
* ranks| mhz| GB |adjst| start | ctl2
|
|
*/
|
|
{2, 833, 4, 4, 6, 0x06060607, 0x08080807},
|
|
{2, 833, 0, 4, 6, 0x06060607, 0x08080807},
|
|
{2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09},
|
|
{2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09},
|
|
{2, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A},
|
|
{2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A},
|
|
{1, 833, 4, 4, 6, 0x06060607, 0x08080807},
|
|
{1, 833, 0, 4, 6, 0x06060607, 0x08080807},
|
|
{1, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09},
|
|
{1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09},
|
|
{1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A},
|
|
{1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A},
|
|
{}
|
|
};
|
|
|
|
static const struct board_specific_parameters *udimms[] = {
|
|
udimm0,
|
|
};
|
|
#endif
|