mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
336d4615f8
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
1044 lines
25 KiB
C
1044 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016
|
|
* Author: Amit Singh Tomar, amittomer25@gmail.com
|
|
*
|
|
* Ethernet driver for H3/A64/A83T based SoC's
|
|
*
|
|
* It is derived from the work done by
|
|
* LABBE Corentin & Chen-Yu Tsai for Linux, THANKS!
|
|
*
|
|
*/
|
|
|
|
#include <cpu_func.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <fdt_support.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <reset.h>
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
#include <asm-generic/gpio.h>
|
|
#endif
|
|
|
|
#define MDIO_CMD_MII_BUSY BIT(0)
|
|
#define MDIO_CMD_MII_WRITE BIT(1)
|
|
|
|
#define MDIO_CMD_MII_PHY_REG_ADDR_MASK 0x000001f0
|
|
#define MDIO_CMD_MII_PHY_REG_ADDR_SHIFT 4
|
|
#define MDIO_CMD_MII_PHY_ADDR_MASK 0x0001f000
|
|
#define MDIO_CMD_MII_PHY_ADDR_SHIFT 12
|
|
|
|
#define CONFIG_TX_DESCR_NUM 32
|
|
#define CONFIG_RX_DESCR_NUM 32
|
|
#define CONFIG_ETH_BUFSIZE 2048 /* Note must be dma aligned */
|
|
|
|
/*
|
|
* The datasheet says that each descriptor can transfers up to 4096 bytes
|
|
* But later, the register documentation reduces that value to 2048,
|
|
* using 2048 cause strange behaviours and even BSP driver use 2047
|
|
*/
|
|
#define CONFIG_ETH_RXSIZE 2044 /* Note must fit in ETH_BUFSIZE */
|
|
|
|
#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
|
|
#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
|
|
|
|
#define H3_EPHY_DEFAULT_VALUE 0x58000
|
|
#define H3_EPHY_DEFAULT_MASK GENMASK(31, 15)
|
|
#define H3_EPHY_ADDR_SHIFT 20
|
|
#define REG_PHY_ADDR_MASK GENMASK(4, 0)
|
|
#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */
|
|
#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */
|
|
#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */
|
|
|
|
#define SC_RMII_EN BIT(13)
|
|
#define SC_EPIT BIT(2) /* 1: RGMII, 0: MII */
|
|
#define SC_ETCS_MASK GENMASK(1, 0)
|
|
#define SC_ETCS_EXT_GMII 0x1
|
|
#define SC_ETCS_INT_GMII 0x2
|
|
#define SC_ETXDC_MASK GENMASK(12, 10)
|
|
#define SC_ETXDC_OFFSET 10
|
|
#define SC_ERXDC_MASK GENMASK(9, 5)
|
|
#define SC_ERXDC_OFFSET 5
|
|
|
|
#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
|
|
|
|
#define AHB_GATE_OFFSET_EPHY 0
|
|
|
|
/* IO mux settings */
|
|
#define SUN8I_IOMUX_H3 2
|
|
#define SUN8I_IOMUX_R40 5
|
|
#define SUN8I_IOMUX 4
|
|
|
|
/* H3/A64 EMAC Register's offset */
|
|
#define EMAC_CTL0 0x00
|
|
#define EMAC_CTL1 0x04
|
|
#define EMAC_INT_STA 0x08
|
|
#define EMAC_INT_EN 0x0c
|
|
#define EMAC_TX_CTL0 0x10
|
|
#define EMAC_TX_CTL1 0x14
|
|
#define EMAC_TX_FLOW_CTL 0x1c
|
|
#define EMAC_TX_DMA_DESC 0x20
|
|
#define EMAC_RX_CTL0 0x24
|
|
#define EMAC_RX_CTL1 0x28
|
|
#define EMAC_RX_DMA_DESC 0x34
|
|
#define EMAC_MII_CMD 0x48
|
|
#define EMAC_MII_DATA 0x4c
|
|
#define EMAC_ADDR0_HIGH 0x50
|
|
#define EMAC_ADDR0_LOW 0x54
|
|
#define EMAC_TX_DMA_STA 0xb0
|
|
#define EMAC_TX_CUR_DESC 0xb4
|
|
#define EMAC_TX_CUR_BUF 0xb8
|
|
#define EMAC_RX_DMA_STA 0xc0
|
|
#define EMAC_RX_CUR_DESC 0xc4
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum emac_variant {
|
|
A83T_EMAC = 1,
|
|
H3_EMAC,
|
|
A64_EMAC,
|
|
R40_GMAC,
|
|
};
|
|
|
|
struct emac_dma_desc {
|
|
u32 status;
|
|
u32 st;
|
|
u32 buf_addr;
|
|
u32 next;
|
|
} __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
struct emac_eth_dev {
|
|
struct emac_dma_desc rx_chain[CONFIG_TX_DESCR_NUM];
|
|
struct emac_dma_desc tx_chain[CONFIG_RX_DESCR_NUM];
|
|
char rxbuffer[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
char txbuffer[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
u32 interface;
|
|
u32 phyaddr;
|
|
u32 link;
|
|
u32 speed;
|
|
u32 duplex;
|
|
u32 phy_configured;
|
|
u32 tx_currdescnum;
|
|
u32 rx_currdescnum;
|
|
u32 addr;
|
|
u32 tx_slot;
|
|
bool use_internal_phy;
|
|
|
|
enum emac_variant variant;
|
|
void *mac_reg;
|
|
phys_addr_t sysctl_reg;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *bus;
|
|
struct clk tx_clk;
|
|
struct clk ephy_clk;
|
|
struct reset_ctl tx_rst;
|
|
struct reset_ctl ephy_rst;
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
struct gpio_desc reset_gpio;
|
|
#endif
|
|
};
|
|
|
|
|
|
struct sun8i_eth_pdata {
|
|
struct eth_pdata eth_pdata;
|
|
u32 reset_delays[3];
|
|
int tx_delay_ps;
|
|
int rx_delay_ps;
|
|
};
|
|
|
|
|
|
static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
struct udevice *dev = bus->priv;
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
ulong start;
|
|
u32 miiaddr = 0;
|
|
int timeout = CONFIG_MDIO_TIMEOUT;
|
|
|
|
miiaddr &= ~MDIO_CMD_MII_WRITE;
|
|
miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK;
|
|
miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) &
|
|
MDIO_CMD_MII_PHY_REG_ADDR_MASK;
|
|
|
|
miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK;
|
|
|
|
miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) &
|
|
MDIO_CMD_MII_PHY_ADDR_MASK;
|
|
|
|
miiaddr |= MDIO_CMD_MII_BUSY;
|
|
|
|
writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
|
|
|
|
start = get_timer(0);
|
|
while (get_timer(start) < timeout) {
|
|
if (!(readl(priv->mac_reg + EMAC_MII_CMD) & MDIO_CMD_MII_BUSY))
|
|
return readl(priv->mac_reg + EMAC_MII_DATA);
|
|
udelay(10);
|
|
};
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 val)
|
|
{
|
|
struct udevice *dev = bus->priv;
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
ulong start;
|
|
u32 miiaddr = 0;
|
|
int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
|
|
|
|
miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK;
|
|
miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) &
|
|
MDIO_CMD_MII_PHY_REG_ADDR_MASK;
|
|
|
|
miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK;
|
|
miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) &
|
|
MDIO_CMD_MII_PHY_ADDR_MASK;
|
|
|
|
miiaddr |= MDIO_CMD_MII_WRITE;
|
|
miiaddr |= MDIO_CMD_MII_BUSY;
|
|
|
|
writel(val, priv->mac_reg + EMAC_MII_DATA);
|
|
writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
|
|
|
|
start = get_timer(0);
|
|
while (get_timer(start) < timeout) {
|
|
if (!(readl(priv->mac_reg + EMAC_MII_CMD) &
|
|
MDIO_CMD_MII_BUSY)) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
};
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _sun8i_write_hwaddr(struct emac_eth_dev *priv, u8 *mac_id)
|
|
{
|
|
u32 macid_lo, macid_hi;
|
|
|
|
macid_lo = mac_id[0] + (mac_id[1] << 8) + (mac_id[2] << 16) +
|
|
(mac_id[3] << 24);
|
|
macid_hi = mac_id[4] + (mac_id[5] << 8);
|
|
|
|
writel(macid_hi, priv->mac_reg + EMAC_ADDR0_HIGH);
|
|
writel(macid_lo, priv->mac_reg + EMAC_ADDR0_LOW);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun8i_adjust_link(struct emac_eth_dev *priv,
|
|
struct phy_device *phydev)
|
|
{
|
|
u32 v;
|
|
|
|
v = readl(priv->mac_reg + EMAC_CTL0);
|
|
|
|
if (phydev->duplex)
|
|
v |= BIT(0);
|
|
else
|
|
v &= ~BIT(0);
|
|
|
|
v &= ~0x0C;
|
|
|
|
switch (phydev->speed) {
|
|
case 1000:
|
|
break;
|
|
case 100:
|
|
v |= BIT(2);
|
|
v |= BIT(3);
|
|
break;
|
|
case 10:
|
|
v |= BIT(3);
|
|
break;
|
|
}
|
|
writel(v, priv->mac_reg + EMAC_CTL0);
|
|
}
|
|
|
|
static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg)
|
|
{
|
|
if (priv->use_internal_phy) {
|
|
/* H3 based SoC's that has an Internal 100MBit PHY
|
|
* needs to be configured and powered up before use
|
|
*/
|
|
*reg &= ~H3_EPHY_DEFAULT_MASK;
|
|
*reg |= H3_EPHY_DEFAULT_VALUE;
|
|
*reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
|
|
*reg &= ~H3_EPHY_SHUTDOWN;
|
|
*reg |= H3_EPHY_SELECT;
|
|
} else
|
|
/* This is to select External Gigabit PHY on
|
|
* the boards with H3 SoC.
|
|
*/
|
|
*reg &= ~H3_EPHY_SELECT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
|
|
struct emac_eth_dev *priv)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
if (priv->variant == R40_GMAC) {
|
|
/* Select RGMII for R40 */
|
|
reg = readl(priv->sysctl_reg + 0x164);
|
|
reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
|
|
CCM_GMAC_CTRL_GPIT_RGMII |
|
|
CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY);
|
|
|
|
writel(reg, priv->sysctl_reg + 0x164);
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(priv->sysctl_reg + 0x30);
|
|
|
|
if (priv->variant == H3_EMAC) {
|
|
ret = sun8i_emac_set_syscon_ephy(priv, ®);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
reg &= ~(SC_ETCS_MASK | SC_EPIT);
|
|
if (priv->variant == H3_EMAC || priv->variant == A64_EMAC)
|
|
reg &= ~SC_RMII_EN;
|
|
|
|
switch (priv->interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
/* default */
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
reg |= SC_EPIT | SC_ETCS_INT_GMII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
if (priv->variant == H3_EMAC ||
|
|
priv->variant == A64_EMAC) {
|
|
reg |= SC_RMII_EN | SC_ETCS_EXT_GMII;
|
|
break;
|
|
}
|
|
/* RMII not supported on A83T */
|
|
default:
|
|
debug("%s: Invalid PHY interface\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->tx_delay_ps)
|
|
reg |= ((pdata->tx_delay_ps / 100) << SC_ETXDC_OFFSET)
|
|
& SC_ETXDC_MASK;
|
|
|
|
if (pdata->rx_delay_ps)
|
|
reg |= ((pdata->rx_delay_ps / 100) << SC_ERXDC_OFFSET)
|
|
& SC_ERXDC_MASK;
|
|
|
|
writel(reg, priv->sysctl_reg + 0x30);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun8i_phy_init(struct emac_eth_dev *priv, void *dev)
|
|
{
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
phy_connect_dev(phydev, dev);
|
|
|
|
priv->phydev = phydev;
|
|
phy_config(priv->phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rx_descs_init(struct emac_eth_dev *priv)
|
|
{
|
|
struct emac_dma_desc *desc_table_p = &priv->rx_chain[0];
|
|
char *rxbuffs = &priv->rxbuffer[0];
|
|
struct emac_dma_desc *desc_p;
|
|
u32 idx;
|
|
|
|
/* flush Rx buffers */
|
|
flush_dcache_range((uintptr_t)rxbuffs, (ulong)rxbuffs +
|
|
RX_TOTAL_BUFSIZE);
|
|
|
|
for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
|
|
desc_p = &desc_table_p[idx];
|
|
desc_p->buf_addr = (uintptr_t)&rxbuffs[idx * CONFIG_ETH_BUFSIZE]
|
|
;
|
|
desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
|
|
desc_p->st |= CONFIG_ETH_RXSIZE;
|
|
desc_p->status = BIT(31);
|
|
}
|
|
|
|
/* Correcting the last pointer of the chain */
|
|
desc_p->next = (uintptr_t)&desc_table_p[0];
|
|
|
|
flush_dcache_range((uintptr_t)priv->rx_chain,
|
|
(uintptr_t)priv->rx_chain +
|
|
sizeof(priv->rx_chain));
|
|
|
|
writel((uintptr_t)&desc_table_p[0], (priv->mac_reg + EMAC_RX_DMA_DESC));
|
|
priv->rx_currdescnum = 0;
|
|
}
|
|
|
|
static void tx_descs_init(struct emac_eth_dev *priv)
|
|
{
|
|
struct emac_dma_desc *desc_table_p = &priv->tx_chain[0];
|
|
char *txbuffs = &priv->txbuffer[0];
|
|
struct emac_dma_desc *desc_p;
|
|
u32 idx;
|
|
|
|
for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
|
|
desc_p = &desc_table_p[idx];
|
|
desc_p->buf_addr = (uintptr_t)&txbuffs[idx * CONFIG_ETH_BUFSIZE]
|
|
;
|
|
desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
|
|
desc_p->status = (1 << 31);
|
|
desc_p->st = 0;
|
|
}
|
|
|
|
/* Correcting the last pointer of the chain */
|
|
desc_p->next = (uintptr_t)&desc_table_p[0];
|
|
|
|
/* Flush all Tx buffer descriptors */
|
|
flush_dcache_range((uintptr_t)priv->tx_chain,
|
|
(uintptr_t)priv->tx_chain +
|
|
sizeof(priv->tx_chain));
|
|
|
|
writel((uintptr_t)&desc_table_p[0], priv->mac_reg + EMAC_TX_DMA_DESC);
|
|
priv->tx_currdescnum = 0;
|
|
}
|
|
|
|
static int _sun8i_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
|
|
{
|
|
u32 reg, v;
|
|
int timeout = 100;
|
|
|
|
reg = readl((priv->mac_reg + EMAC_CTL1));
|
|
|
|
if (!(reg & 0x1)) {
|
|
/* Soft reset MAC */
|
|
setbits_le32((priv->mac_reg + EMAC_CTL1), 0x1);
|
|
do {
|
|
reg = readl(priv->mac_reg + EMAC_CTL1);
|
|
} while ((reg & 0x01) != 0 && (--timeout));
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Rewrite mac address after reset */
|
|
_sun8i_write_hwaddr(priv, enetaddr);
|
|
|
|
v = readl(priv->mac_reg + EMAC_TX_CTL1);
|
|
/* TX_MD Transmission starts after a full frame located in TX DMA FIFO*/
|
|
v |= BIT(1);
|
|
writel(v, priv->mac_reg + EMAC_TX_CTL1);
|
|
|
|
v = readl(priv->mac_reg + EMAC_RX_CTL1);
|
|
/* RX_MD RX DMA reads data from RX DMA FIFO to host memory after a
|
|
* complete frame has been written to RX DMA FIFO
|
|
*/
|
|
v |= BIT(1);
|
|
writel(v, priv->mac_reg + EMAC_RX_CTL1);
|
|
|
|
/* DMA */
|
|
writel(8 << 24, priv->mac_reg + EMAC_CTL1);
|
|
|
|
/* Initialize rx/tx descriptors */
|
|
rx_descs_init(priv);
|
|
tx_descs_init(priv);
|
|
|
|
/* PHY Start Up */
|
|
phy_startup(priv->phydev);
|
|
|
|
sun8i_adjust_link(priv, priv->phydev);
|
|
|
|
/* Start RX DMA */
|
|
v = readl(priv->mac_reg + EMAC_RX_CTL1);
|
|
v |= BIT(30);
|
|
writel(v, priv->mac_reg + EMAC_RX_CTL1);
|
|
/* Start TX DMA */
|
|
v = readl(priv->mac_reg + EMAC_TX_CTL1);
|
|
v |= BIT(30);
|
|
writel(v, priv->mac_reg + EMAC_TX_CTL1);
|
|
|
|
/* Enable RX/TX */
|
|
setbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31));
|
|
setbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int parse_phy_pins(struct udevice *dev)
|
|
{
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
int offset;
|
|
const char *pin_name;
|
|
int drive, pull = SUN4I_PINCTRL_NO_PULL, i;
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
|
|
"pinctrl-0");
|
|
if (offset < 0) {
|
|
printf("WARNING: emac: cannot find pinctrl-0 node\n");
|
|
return offset;
|
|
}
|
|
|
|
drive = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0,
|
|
"drive-strength", ~0);
|
|
if (drive != ~0) {
|
|
if (drive <= 10)
|
|
drive = SUN4I_PINCTRL_10_MA;
|
|
else if (drive <= 20)
|
|
drive = SUN4I_PINCTRL_20_MA;
|
|
else if (drive <= 30)
|
|
drive = SUN4I_PINCTRL_30_MA;
|
|
else
|
|
drive = SUN4I_PINCTRL_40_MA;
|
|
}
|
|
|
|
if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-up", NULL))
|
|
pull = SUN4I_PINCTRL_PULL_UP;
|
|
else if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-down", NULL))
|
|
pull = SUN4I_PINCTRL_PULL_DOWN;
|
|
|
|
for (i = 0; ; i++) {
|
|
int pin;
|
|
|
|
pin_name = fdt_stringlist_get(gd->fdt_blob, offset,
|
|
"pins", i, NULL);
|
|
if (!pin_name)
|
|
break;
|
|
|
|
pin = sunxi_name_to_gpio(pin_name);
|
|
if (pin < 0)
|
|
continue;
|
|
|
|
if (priv->variant == H3_EMAC)
|
|
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_H3);
|
|
else if (priv->variant == R40_GMAC)
|
|
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_R40);
|
|
else
|
|
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX);
|
|
|
|
if (drive != ~0)
|
|
sunxi_gpio_set_drv(pin, drive);
|
|
if (pull != ~0)
|
|
sunxi_gpio_set_pull(pin, pull);
|
|
}
|
|
|
|
if (!i) {
|
|
printf("WARNING: emac: cannot find pins property\n");
|
|
return -2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _sun8i_eth_recv(struct emac_eth_dev *priv, uchar **packetp)
|
|
{
|
|
u32 status, desc_num = priv->rx_currdescnum;
|
|
struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num];
|
|
int length = -EAGAIN;
|
|
int good_packet = 1;
|
|
uintptr_t desc_start = (uintptr_t)desc_p;
|
|
uintptr_t desc_end = desc_start +
|
|
roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
|
|
|
|
ulong data_start = (uintptr_t)desc_p->buf_addr;
|
|
ulong data_end;
|
|
|
|
/* Invalidate entire buffer descriptor */
|
|
invalidate_dcache_range(desc_start, desc_end);
|
|
|
|
status = desc_p->status;
|
|
|
|
/* Check for DMA own bit */
|
|
if (!(status & BIT(31))) {
|
|
length = (desc_p->status >> 16) & 0x3FFF;
|
|
|
|
if (length < 0x40) {
|
|
good_packet = 0;
|
|
debug("RX: Bad Packet (runt)\n");
|
|
}
|
|
|
|
data_end = data_start + length;
|
|
/* Invalidate received data */
|
|
invalidate_dcache_range(rounddown(data_start,
|
|
ARCH_DMA_MINALIGN),
|
|
roundup(data_end,
|
|
ARCH_DMA_MINALIGN));
|
|
if (good_packet) {
|
|
if (length > CONFIG_ETH_RXSIZE) {
|
|
printf("Received packet is too big (len=%d)\n",
|
|
length);
|
|
return -EMSGSIZE;
|
|
}
|
|
*packetp = (uchar *)(ulong)desc_p->buf_addr;
|
|
return length;
|
|
}
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
static int _sun8i_emac_eth_send(struct emac_eth_dev *priv, void *packet,
|
|
int len)
|
|
{
|
|
u32 v, desc_num = priv->tx_currdescnum;
|
|
struct emac_dma_desc *desc_p = &priv->tx_chain[desc_num];
|
|
uintptr_t desc_start = (uintptr_t)desc_p;
|
|
uintptr_t desc_end = desc_start +
|
|
roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
|
|
|
|
uintptr_t data_start = (uintptr_t)desc_p->buf_addr;
|
|
uintptr_t data_end = data_start +
|
|
roundup(len, ARCH_DMA_MINALIGN);
|
|
|
|
/* Invalidate entire buffer descriptor */
|
|
invalidate_dcache_range(desc_start, desc_end);
|
|
|
|
desc_p->st = len;
|
|
/* Mandatory undocumented bit */
|
|
desc_p->st |= BIT(24);
|
|
|
|
memcpy((void *)data_start, packet, len);
|
|
|
|
/* Flush data to be sent */
|
|
flush_dcache_range(data_start, data_end);
|
|
|
|
/* frame end */
|
|
desc_p->st |= BIT(30);
|
|
desc_p->st |= BIT(31);
|
|
|
|
/*frame begin */
|
|
desc_p->st |= BIT(29);
|
|
desc_p->status = BIT(31);
|
|
|
|
/*Descriptors st and status field has changed, so FLUSH it */
|
|
flush_dcache_range(desc_start, desc_end);
|
|
|
|
/* Move to next Descriptor and wrap around */
|
|
if (++desc_num >= CONFIG_TX_DESCR_NUM)
|
|
desc_num = 0;
|
|
priv->tx_currdescnum = desc_num;
|
|
|
|
/* Start the DMA */
|
|
v = readl(priv->mac_reg + EMAC_TX_CTL1);
|
|
v |= BIT(31);/* mandatory */
|
|
v |= BIT(30);/* mandatory */
|
|
writel(v, priv->mac_reg + EMAC_TX_CTL1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun8i_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
return _sun8i_write_hwaddr(priv, pdata->enetaddr);
|
|
}
|
|
|
|
static int sun8i_emac_board_setup(struct emac_eth_dev *priv)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_enable(&priv->tx_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable TX clock\n");
|
|
return ret;
|
|
}
|
|
|
|
if (reset_valid(&priv->tx_rst)) {
|
|
ret = reset_deassert(&priv->tx_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert TX reset\n");
|
|
goto err_tx_clk;
|
|
}
|
|
}
|
|
|
|
/* Only H3/H5 have clock controls for internal EPHY */
|
|
if (clk_valid(&priv->ephy_clk)) {
|
|
ret = clk_enable(&priv->ephy_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable EPHY TX clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (reset_valid(&priv->ephy_rst)) {
|
|
ret = reset_deassert(&priv->ephy_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert EPHY TX clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_tx_clk:
|
|
clk_disable(&priv->tx_clk);
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
static int sun8i_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct udevice *dev = bus->priv;
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
struct sun8i_eth_pdata *pdata = dev_get_platdata(dev);
|
|
int ret;
|
|
|
|
if (!dm_gpio_is_valid(&priv->reset_gpio))
|
|
return 0;
|
|
|
|
/* reset the phy */
|
|
ret = dm_gpio_set_value(&priv->reset_gpio, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(pdata->reset_delays[0]);
|
|
|
|
ret = dm_gpio_set_value(&priv->reset_gpio, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(pdata->reset_delays[1]);
|
|
|
|
ret = dm_gpio_set_value(&priv->reset_gpio, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(pdata->reset_delays[2]);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sun8i_mdio_init(const char *name, struct udevice *priv)
|
|
{
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
debug("Failed to allocate MDIO bus\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus->read = sun8i_mdio_read;
|
|
bus->write = sun8i_mdio_write;
|
|
snprintf(bus->name, sizeof(bus->name), name);
|
|
bus->priv = (void *)priv;
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
bus->reset = sun8i_mdio_reset;
|
|
#endif
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
static int sun8i_emac_eth_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
|
|
return _sun8i_emac_eth_init(dev->priv, pdata->enetaddr);
|
|
}
|
|
|
|
static int sun8i_emac_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
return _sun8i_emac_eth_send(priv, packet, length);
|
|
}
|
|
|
|
static int sun8i_emac_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
return _sun8i_eth_recv(priv, packetp);
|
|
}
|
|
|
|
static int _sun8i_free_pkt(struct emac_eth_dev *priv)
|
|
{
|
|
u32 desc_num = priv->rx_currdescnum;
|
|
struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num];
|
|
uintptr_t desc_start = (uintptr_t)desc_p;
|
|
uintptr_t desc_end = desc_start +
|
|
roundup(sizeof(u32), ARCH_DMA_MINALIGN);
|
|
|
|
/* Make the current descriptor valid again */
|
|
desc_p->status |= BIT(31);
|
|
|
|
/* Flush Status field of descriptor */
|
|
flush_dcache_range(desc_start, desc_end);
|
|
|
|
/* Move to next desc and wrap-around condition. */
|
|
if (++desc_num >= CONFIG_RX_DESCR_NUM)
|
|
desc_num = 0;
|
|
priv->rx_currdescnum = desc_num;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun8i_eth_free_pkt(struct udevice *dev, uchar *packet,
|
|
int length)
|
|
{
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
return _sun8i_free_pkt(priv);
|
|
}
|
|
|
|
static void sun8i_emac_eth_stop(struct udevice *dev)
|
|
{
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
/* Stop Rx/Tx transmitter */
|
|
clrbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31));
|
|
clrbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31));
|
|
|
|
/* Stop TX DMA */
|
|
clrbits_le32(priv->mac_reg + EMAC_TX_CTL1, BIT(30));
|
|
|
|
phy_shutdown(priv->phydev);
|
|
}
|
|
|
|
static int sun8i_emac_eth_probe(struct udevice *dev)
|
|
{
|
|
struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev);
|
|
struct eth_pdata *pdata = &sun8i_pdata->eth_pdata;
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->mac_reg = (void *)pdata->iobase;
|
|
|
|
ret = sun8i_emac_board_setup(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sun8i_emac_set_syscon(sun8i_pdata, priv);
|
|
|
|
sun8i_mdio_init(dev->name, dev);
|
|
priv->bus = miiphy_get_dev_by_name(dev->name);
|
|
|
|
return sun8i_phy_init(priv, dev);
|
|
}
|
|
|
|
static const struct eth_ops sun8i_emac_eth_ops = {
|
|
.start = sun8i_emac_eth_start,
|
|
.write_hwaddr = sun8i_eth_write_hwaddr,
|
|
.send = sun8i_emac_eth_send,
|
|
.recv = sun8i_emac_eth_recv,
|
|
.free_pkt = sun8i_eth_free_pkt,
|
|
.stop = sun8i_emac_eth_stop,
|
|
};
|
|
|
|
static int sun8i_get_ephy_nodes(struct emac_eth_dev *priv)
|
|
{
|
|
int emac_node, ephy_node, ret, ephy_handle;
|
|
|
|
emac_node = fdt_path_offset(gd->fdt_blob,
|
|
"/soc/ethernet@1c30000");
|
|
if (emac_node < 0) {
|
|
debug("failed to get emac node\n");
|
|
return emac_node;
|
|
}
|
|
ephy_handle = fdtdec_lookup_phandle(gd->fdt_blob,
|
|
emac_node, "phy-handle");
|
|
|
|
/* look for mdio-mux node for internal PHY node */
|
|
ephy_node = fdt_path_offset(gd->fdt_blob,
|
|
"/soc/ethernet@1c30000/mdio-mux/mdio@1/ethernet-phy@1");
|
|
if (ephy_node < 0) {
|
|
debug("failed to get mdio-mux with internal PHY\n");
|
|
return ephy_node;
|
|
}
|
|
|
|
/* This is not the phy we are looking for */
|
|
if (ephy_node != ephy_handle)
|
|
return 0;
|
|
|
|
ret = fdt_node_check_compatible(gd->fdt_blob, ephy_node,
|
|
"allwinner,sun8i-h3-mdio-internal");
|
|
if (ret < 0) {
|
|
debug("failed to find mdio-internal node\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_get_by_index_nodev(offset_to_ofnode(ephy_node), 0,
|
|
&priv->ephy_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get EPHY TX clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_by_index_nodev(offset_to_ofnode(ephy_node), 0,
|
|
&priv->ephy_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get EPHY TX reset\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->use_internal_phy = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev);
|
|
struct eth_pdata *pdata = &sun8i_pdata->eth_pdata;
|
|
struct emac_eth_dev *priv = dev_get_priv(dev);
|
|
const char *phy_mode;
|
|
const fdt32_t *reg;
|
|
int node = dev_of_offset(dev);
|
|
int offset = 0;
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
int reset_flags = GPIOD_IS_OUT;
|
|
#endif
|
|
int ret;
|
|
|
|
pdata->iobase = devfdt_get_addr(dev);
|
|
if (pdata->iobase == FDT_ADDR_T_NONE) {
|
|
debug("%s: Cannot find MAC base address\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->variant = dev_get_driver_data(dev);
|
|
|
|
if (!priv->variant) {
|
|
printf("%s: Missing variant\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_get_by_name(dev, "stmmaceth", &priv->tx_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get TX clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_by_name(dev, "stmmaceth", &priv->tx_rst);
|
|
if (ret && ret != -ENOENT) {
|
|
dev_err(dev, "failed to get TX reset\n");
|
|
return ret;
|
|
}
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
|
|
if (offset < 0) {
|
|
debug("%s: cannot find syscon node\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
|
|
if (!reg) {
|
|
debug("%s: cannot find reg property in syscon node\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
|
|
offset, reg);
|
|
if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
|
|
debug("%s: Cannot find syscon base address\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdata->phy_interface = -1;
|
|
priv->phyaddr = -1;
|
|
priv->use_internal_phy = false;
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
|
|
if (offset < 0) {
|
|
debug("%s: Cannot find PHY address\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
|
|
|
|
phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
|
|
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
printf("phy interface%d\n", pdata->phy_interface);
|
|
|
|
if (pdata->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (priv->variant == H3_EMAC) {
|
|
ret = sun8i_get_ephy_nodes(priv);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
priv->interface = pdata->phy_interface;
|
|
|
|
if (!priv->use_internal_phy)
|
|
parse_phy_pins(dev);
|
|
|
|
sun8i_pdata->tx_delay_ps = fdtdec_get_int(gd->fdt_blob, node,
|
|
"allwinner,tx-delay-ps", 0);
|
|
if (sun8i_pdata->tx_delay_ps < 0 || sun8i_pdata->tx_delay_ps > 700)
|
|
printf("%s: Invalid TX delay value %d\n", __func__,
|
|
sun8i_pdata->tx_delay_ps);
|
|
|
|
sun8i_pdata->rx_delay_ps = fdtdec_get_int(gd->fdt_blob, node,
|
|
"allwinner,rx-delay-ps", 0);
|
|
if (sun8i_pdata->rx_delay_ps < 0 || sun8i_pdata->rx_delay_ps > 3100)
|
|
printf("%s: Invalid RX delay value %d\n", __func__,
|
|
sun8i_pdata->rx_delay_ps);
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
if (fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
|
|
"snps,reset-active-low"))
|
|
reset_flags |= GPIOD_ACTIVE_LOW;
|
|
|
|
ret = gpio_request_by_name(dev, "snps,reset-gpio", 0,
|
|
&priv->reset_gpio, reset_flags);
|
|
|
|
if (ret == 0) {
|
|
ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
|
|
"snps,reset-delays-us",
|
|
sun8i_pdata->reset_delays, 3);
|
|
} else if (ret == -ENOENT) {
|
|
ret = 0;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id sun8i_emac_eth_ids[] = {
|
|
{.compatible = "allwinner,sun8i-h3-emac", .data = (uintptr_t)H3_EMAC },
|
|
{.compatible = "allwinner,sun50i-a64-emac",
|
|
.data = (uintptr_t)A64_EMAC },
|
|
{.compatible = "allwinner,sun8i-a83t-emac",
|
|
.data = (uintptr_t)A83T_EMAC },
|
|
{.compatible = "allwinner,sun8i-r40-gmac",
|
|
.data = (uintptr_t)R40_GMAC },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_sun8i_emac) = {
|
|
.name = "eth_sun8i_emac",
|
|
.id = UCLASS_ETH,
|
|
.of_match = sun8i_emac_eth_ids,
|
|
.ofdata_to_platdata = sun8i_emac_eth_ofdata_to_platdata,
|
|
.probe = sun8i_emac_eth_probe,
|
|
.ops = &sun8i_emac_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct emac_eth_dev),
|
|
.platdata_auto_alloc_size = sizeof(struct sun8i_eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|