u-boot/include/console.h
Simon Glass b612312816 console: Add a function to read a line of the output / eof
When recording the console output for testing it is useful to be able to
read the output a line at a time to check that the output is correct. Also
we need to check that we get to the end of the output.

Add a console function to return the next line and another to see how must
data is left.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00

82 lines
2.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef __CONSOLE_H
#define __CONSOLE_H
extern char console_buffer[];
/* common/console.c */
int console_init_f(void); /* Before relocation; uses the serial stuff */
int console_init_r(void); /* After relocation; uses the console stuff */
int console_assign(int file, const char *devname); /* Assign the console */
int ctrlc(void);
int had_ctrlc(void); /* have we had a Control-C since last clear? */
void clear_ctrlc(void); /* clear the Control-C condition */
int disable_ctrlc(int); /* 1 to disable, 0 to enable Control-C detect */
int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */
/**
* console_record_init() - set up the console recording buffers
*
* This should be called as soon as malloc() is available so that the maximum
* amount of console output can be recorded.
*/
int console_record_init(void);
/**
* console_record_reset() - reset the console recording buffers
*
* Removes any data in the buffers
*/
void console_record_reset(void);
/**
* console_record_reset_enable() - reset and enable the console buffers
*
* This should be called to enable the console buffer.
*/
void console_record_reset_enable(void);
/**
* console_record_readline() - Read a line from the console output
*
* This reads the next available line from the console output previously
* recorded.
*
* @str: Place to put string
* @maxlen: Maximum length of @str including nul terminator
* @return length of string returned
*/
int console_record_readline(char *str, int maxlen);
/**
* console_record_avail() - Get the number of available bytes in console output
*
* @return available bytes (0 if empty)
*/
int console_record_avail(void);
/**
* console_announce_r() - print a U-Boot console on non-serial consoles
*
* When U-Boot starts up with a display it generally does not announce itself
* on the display. The banner is instead emitted on the UART before relocation.
* This function prints a banner on devices which (we assume) did not receive
* it before relocation.
*
* @return 0 (meaning no errors)
*/
int console_announce_r(void);
/*
* CONSOLE multiplexing.
*/
#ifdef CONFIG_CONSOLE_MUX
#include <iomux.h>
#endif
#endif