mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 00:03:24 +00:00
65cc0e2a65
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
298 lines
6.7 KiB
C
298 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
* Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
|
|
* Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
#if !defined(CONFIG_AT91FAMILY)
|
|
# error You need to define CONFIG_AT91FAMILY in your board config!
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static unsigned long at91_css_to_rate(unsigned long css)
|
|
{
|
|
switch (css) {
|
|
case AT91_PMC_MCKR_CSS_SLOW:
|
|
return CFG_SYS_AT91_SLOW_CLOCK;
|
|
case AT91_PMC_MCKR_CSS_MAIN:
|
|
return gd->arch.main_clk_rate_hz;
|
|
case AT91_PMC_MCKR_CSS_PLLA:
|
|
return gd->arch.plla_rate_hz;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 at91_pll_rate(u32 freq, u32 reg)
|
|
{
|
|
unsigned mul, div;
|
|
|
|
div = reg & 0xff;
|
|
mul = (reg >> 18) & 0x7f;
|
|
if (div && mul) {
|
|
freq /= div;
|
|
freq *= mul + 1;
|
|
} else {
|
|
freq = 0;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
int at91_clock_init(unsigned long main_clock)
|
|
{
|
|
unsigned freq, mckr;
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
#ifndef CFG_SYS_AT91_MAIN_CLOCK
|
|
unsigned tmp;
|
|
/*
|
|
* When the bootloader initialized the main oscillator correctly,
|
|
* there's no problem using the cycle counter. But if it didn't,
|
|
* or when using oscillator bypass mode, we must be told the speed
|
|
* of the main clock.
|
|
*/
|
|
if (!main_clock) {
|
|
do {
|
|
tmp = readl(&pmc->mcfr);
|
|
} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
|
|
tmp &= AT91_PMC_MCFR_MAINF_MASK;
|
|
main_clock = tmp * (CFG_SYS_AT91_SLOW_CLOCK / 16);
|
|
}
|
|
#endif
|
|
gd->arch.main_clk_rate_hz = main_clock;
|
|
|
|
/* report if PLLA is more than mildly overclocked */
|
|
gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
|
|
|
|
/*
|
|
* MCK and CPU derive from one of those primary clocks.
|
|
* For now, assume this parentage won't change.
|
|
*/
|
|
mckr = readl(&pmc->mckr);
|
|
|
|
/* plla divisor by 2 */
|
|
if (mckr & (1 << 12))
|
|
gd->arch.plla_rate_hz >>= 1;
|
|
|
|
gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
freq = gd->arch.mck_rate_hz;
|
|
|
|
/* prescale */
|
|
freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
|
|
|
|
switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
|
|
case AT91_PMC_MCKR_MDIV_2:
|
|
gd->arch.mck_rate_hz = freq / 2;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_3:
|
|
gd->arch.mck_rate_hz = freq / 3;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_4:
|
|
gd->arch.mck_rate_hz = freq / 4;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
gd->arch.cpu_clk_rate_hz = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void at91_plla_init(u32 pllar)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
writel(pllar, &pmc->pllar);
|
|
while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
|
|
;
|
|
}
|
|
|
|
void at91_mck_init(u32 mckr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 tmp;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~(AT91_PMC_MCKR_CSS_MASK |
|
|
AT91_PMC_MCKR_PRES_MASK |
|
|
AT91_PMC_MCKR_MDIV_MASK |
|
|
AT91_PMC_MCKR_PLLADIV_2);
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp &= ~AT91_PMC_MCKR_H32MXDIV;
|
|
#endif
|
|
|
|
tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
|
|
AT91_PMC_MCKR_PRES_MASK |
|
|
AT91_PMC_MCKR_MDIV_MASK |
|
|
AT91_PMC_MCKR_PLLADIV_2);
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
|
|
#endif
|
|
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
}
|
|
|
|
/*
|
|
* For the Master Clock Controller Register(MCKR), while switching
|
|
* to a lower clock source, we must switch the clock source first
|
|
* instead of last. Otherwise, we could end up with too high frequency
|
|
* on the internal bus and peripherals.
|
|
*/
|
|
void at91_mck_init_down(u32 mckr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 tmp;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_CSS_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_H32MXDIV);
|
|
tmp |= (mckr & AT91_PMC_MCKR_H32MXDIV);
|
|
writel(tmp, &pmc->mckr);
|
|
#endif
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_PLLADIV_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_PLLADIV_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_MDIV_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_MDIV_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_PRES_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_PRES_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
}
|
|
|
|
int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 regval, status;
|
|
u32 timeout = 1000;
|
|
|
|
if (id > AT91_PMC_PCR_PID_MASK)
|
|
return -EINVAL;
|
|
|
|
if (div > 0xff)
|
|
return -EINVAL;
|
|
|
|
if (clk_source == GCK_CSS_UPLL_CLK) {
|
|
if (at91_upll_clk_enable())
|
|
return -ENODEV;
|
|
}
|
|
|
|
writel(id, &pmc->pcr);
|
|
regval = readl(&pmc->pcr);
|
|
regval &= ~AT91_PMC_PCR_GCKCSS;
|
|
regval &= ~AT91_PMC_PCR_GCKDIV;
|
|
|
|
switch (clk_source) {
|
|
case GCK_CSS_SLOW_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK;
|
|
break;
|
|
case GCK_CSS_MAIN_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK;
|
|
break;
|
|
case GCK_CSS_PLLA_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK;
|
|
break;
|
|
case GCK_CSS_UPLL_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK;
|
|
break;
|
|
case GCK_CSS_MCK_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK;
|
|
break;
|
|
case GCK_CSS_AUDIO_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK;
|
|
break;
|
|
default:
|
|
printf("Error GCK clock source selection!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regval |= AT91_PMC_PCR_CMD_WRITE |
|
|
AT91_PMC_PCR_GCKDIV_(div) |
|
|
AT91_PMC_PCR_GCKEN;
|
|
|
|
writel(regval, &pmc->pcr);
|
|
|
|
do {
|
|
udelay(1);
|
|
status = readl(&pmc->sr);
|
|
} while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY)));
|
|
|
|
if (!timeout)
|
|
printf("Timeout waiting for GCK ready!\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 at91_get_periph_generated_clk(u32 id)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 regval, clk_source, div;
|
|
u32 freq;
|
|
|
|
if (id > AT91_PMC_PCR_PID_MASK)
|
|
return 0;
|
|
|
|
writel(id, &pmc->pcr);
|
|
regval = readl(&pmc->pcr);
|
|
|
|
clk_source = regval & AT91_PMC_PCR_GCKCSS;
|
|
switch (clk_source) {
|
|
case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
|
|
freq = CFG_SYS_AT91_SLOW_CLOCK;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
|
|
freq = gd->arch.main_clk_rate_hz;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
|
|
freq = gd->arch.plla_rate_hz;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_UPLL_CLK:
|
|
freq = AT91_UTMI_PLL_CLK_FREQ;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_MCK_CLK:
|
|
freq = gd->arch.mck_rate_hz;
|
|
break;
|
|
default:
|
|
printf("Improper GCK clock source selection!\n");
|
|
freq = 0;
|
|
break;
|
|
}
|
|
|
|
div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
|
|
div += 1;
|
|
|
|
return freq / div;
|
|
}
|