mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1193397592
This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250) Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
714 lines
18 KiB
C
714 lines
18 KiB
C
/*
|
|
* Copyright (c) 2014 Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
|
|
* based on the U-Boot Asix driver as well as information
|
|
* from the Linux AX88179_178a driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <net.h>
|
|
#include <linux/mii.h>
|
|
#include "usb_ether.h"
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
|
|
/* ASIX AX88179 based USB 3.0 Ethernet Devices */
|
|
#define AX88179_PHY_ID 0x03
|
|
#define AX_EEPROM_LEN 0x100
|
|
#define AX88179_EEPROM_MAGIC 0x17900b95
|
|
#define AX_MCAST_FLTSIZE 8
|
|
#define AX_MAX_MCAST 64
|
|
#define AX_INT_PPLS_LINK (1 << 16)
|
|
#define AX_RXHDR_L4_TYPE_MASK 0x1c
|
|
#define AX_RXHDR_L4_TYPE_UDP 4
|
|
#define AX_RXHDR_L4_TYPE_TCP 16
|
|
#define AX_RXHDR_L3CSUM_ERR 2
|
|
#define AX_RXHDR_L4CSUM_ERR 1
|
|
#define AX_RXHDR_CRC_ERR (1 << 29)
|
|
#define AX_RXHDR_DROP_ERR (1 << 31)
|
|
#define AX_ENDPOINT_INT 0x01
|
|
#define AX_ENDPOINT_IN 0x02
|
|
#define AX_ENDPOINT_OUT 0x03
|
|
#define AX_ACCESS_MAC 0x01
|
|
#define AX_ACCESS_PHY 0x02
|
|
#define AX_ACCESS_EEPROM 0x04
|
|
#define AX_ACCESS_EFUS 0x05
|
|
#define AX_PAUSE_WATERLVL_HIGH 0x54
|
|
#define AX_PAUSE_WATERLVL_LOW 0x55
|
|
|
|
#define PHYSICAL_LINK_STATUS 0x02
|
|
#define AX_USB_SS (1 << 2)
|
|
#define AX_USB_HS (1 << 1)
|
|
|
|
#define GENERAL_STATUS 0x03
|
|
#define AX_SECLD (1 << 2)
|
|
|
|
#define AX_SROM_ADDR 0x07
|
|
#define AX_SROM_CMD 0x0a
|
|
#define EEP_RD (1 << 2)
|
|
#define EEP_BUSY (1 << 4)
|
|
|
|
#define AX_SROM_DATA_LOW 0x08
|
|
#define AX_SROM_DATA_HIGH 0x09
|
|
|
|
#define AX_RX_CTL 0x0b
|
|
#define AX_RX_CTL_DROPCRCERR (1 << 8)
|
|
#define AX_RX_CTL_IPE (1 << 9)
|
|
#define AX_RX_CTL_START (1 << 7)
|
|
#define AX_RX_CTL_AP (1 << 5)
|
|
#define AX_RX_CTL_AM (1 << 4)
|
|
#define AX_RX_CTL_AB (1 << 3)
|
|
#define AX_RX_CTL_AMALL (1 << 1)
|
|
#define AX_RX_CTL_PRO (1 << 0)
|
|
#define AX_RX_CTL_STOP 0
|
|
|
|
#define AX_NODE_ID 0x10
|
|
#define AX_MULFLTARY 0x16
|
|
|
|
#define AX_MEDIUM_STATUS_MODE 0x22
|
|
#define AX_MEDIUM_GIGAMODE (1 << 0)
|
|
#define AX_MEDIUM_FULL_DUPLEX (1 << 1)
|
|
#define AX_MEDIUM_EN_125MHZ (1 << 3)
|
|
#define AX_MEDIUM_RXFLOW_CTRLEN (1 << 4)
|
|
#define AX_MEDIUM_TXFLOW_CTRLEN (1 << 5)
|
|
#define AX_MEDIUM_RECEIVE_EN (1 << 8)
|
|
#define AX_MEDIUM_PS (1 << 9)
|
|
#define AX_MEDIUM_JUMBO_EN 0x8040
|
|
|
|
#define AX_MONITOR_MOD 0x24
|
|
#define AX_MONITOR_MODE_RWLC (1 << 1)
|
|
#define AX_MONITOR_MODE_RWMP (1 << 2)
|
|
#define AX_MONITOR_MODE_PMEPOL (1 << 5)
|
|
#define AX_MONITOR_MODE_PMETYPE (1 << 6)
|
|
|
|
#define AX_GPIO_CTRL 0x25
|
|
#define AX_GPIO_CTRL_GPIO3EN (1 << 7)
|
|
#define AX_GPIO_CTRL_GPIO2EN (1 << 6)
|
|
#define AX_GPIO_CTRL_GPIO1EN (1 << 5)
|
|
|
|
#define AX_PHYPWR_RSTCTL 0x26
|
|
#define AX_PHYPWR_RSTCTL_BZ (1 << 4)
|
|
#define AX_PHYPWR_RSTCTL_IPRL (1 << 5)
|
|
#define AX_PHYPWR_RSTCTL_AT (1 << 12)
|
|
|
|
#define AX_RX_BULKIN_QCTRL 0x2e
|
|
#define AX_CLK_SELECT 0x33
|
|
#define AX_CLK_SELECT_BCS (1 << 0)
|
|
#define AX_CLK_SELECT_ACS (1 << 1)
|
|
#define AX_CLK_SELECT_ULR (1 << 3)
|
|
|
|
#define AX_RXCOE_CTL 0x34
|
|
#define AX_RXCOE_IP (1 << 0)
|
|
#define AX_RXCOE_TCP (1 << 1)
|
|
#define AX_RXCOE_UDP (1 << 2)
|
|
#define AX_RXCOE_TCPV6 (1 << 5)
|
|
#define AX_RXCOE_UDPV6 (1 << 6)
|
|
|
|
#define AX_TXCOE_CTL 0x35
|
|
#define AX_TXCOE_IP (1 << 0)
|
|
#define AX_TXCOE_TCP (1 << 1)
|
|
#define AX_TXCOE_UDP (1 << 2)
|
|
#define AX_TXCOE_TCPV6 (1 << 5)
|
|
#define AX_TXCOE_UDPV6 (1 << 6)
|
|
|
|
#define AX_LEDCTRL 0x73
|
|
|
|
#define GMII_PHY_PHYSR 0x11
|
|
#define GMII_PHY_PHYSR_SMASK 0xc000
|
|
#define GMII_PHY_PHYSR_GIGA (1 << 15)
|
|
#define GMII_PHY_PHYSR_100 (1 << 14)
|
|
#define GMII_PHY_PHYSR_FULL (1 << 13)
|
|
#define GMII_PHY_PHYSR_LINK (1 << 10)
|
|
|
|
#define GMII_LED_ACT 0x1a
|
|
#define GMII_LED_ACTIVE_MASK 0xff8f
|
|
#define GMII_LED0_ACTIVE (1 << 4)
|
|
#define GMII_LED1_ACTIVE (1 << 5)
|
|
#define GMII_LED2_ACTIVE (1 << 6)
|
|
|
|
#define GMII_LED_LINK 0x1c
|
|
#define GMII_LED_LINK_MASK 0xf888
|
|
#define GMII_LED0_LINK_10 (1 << 0)
|
|
#define GMII_LED0_LINK_100 (1 << 1)
|
|
#define GMII_LED0_LINK_1000 (1 << 2)
|
|
#define GMII_LED1_LINK_10 (1 << 4)
|
|
#define GMII_LED1_LINK_100 (1 << 5)
|
|
#define GMII_LED1_LINK_1000 (1 << 6)
|
|
#define GMII_LED2_LINK_10 (1 << 8)
|
|
#define GMII_LED2_LINK_100 (1 << 9)
|
|
#define GMII_LED2_LINK_1000 (1 << 10)
|
|
#define LED0_ACTIVE (1 << 0)
|
|
#define LED0_LINK_10 (1 << 1)
|
|
#define LED0_LINK_100 (1 << 2)
|
|
#define LED0_LINK_1000 (1 << 3)
|
|
#define LED0_FD (1 << 4)
|
|
#define LED0_USB3_MASK 0x001f
|
|
#define LED1_ACTIVE (1 << 5)
|
|
#define LED1_LINK_10 (1 << 6)
|
|
#define LED1_LINK_100 (1 << 7)
|
|
#define LED1_LINK_1000 (1 << 8)
|
|
#define LED1_FD (1 << 9)
|
|
#define LED1_USB3_MASK 0x03e0
|
|
#define LED2_ACTIVE (1 << 10)
|
|
#define LED2_LINK_1000 (1 << 13)
|
|
#define LED2_LINK_100 (1 << 12)
|
|
#define LED2_LINK_10 (1 << 11)
|
|
#define LED2_FD (1 << 14)
|
|
#define LED_VALID (1 << 15)
|
|
#define LED2_USB3_MASK 0x7c00
|
|
|
|
#define GMII_PHYPAGE 0x1e
|
|
#define GMII_PHY_PAGE_SELECT 0x1f
|
|
#define GMII_PHY_PGSEL_EXT 0x0007
|
|
#define GMII_PHY_PGSEL_PAGE0 0x0000
|
|
|
|
/* local defines */
|
|
#define ASIX_BASE_NAME "axg"
|
|
#define USB_CTRL_SET_TIMEOUT 5000
|
|
#define USB_CTRL_GET_TIMEOUT 5000
|
|
#define USB_BULK_SEND_TIMEOUT 5000
|
|
#define USB_BULK_RECV_TIMEOUT 5000
|
|
|
|
#define AX_RX_URB_SIZE 1024 * 0x12
|
|
#define BLK_FRAME_SIZE 0x200
|
|
#define PHY_CONNECT_TIMEOUT 5000
|
|
|
|
#define TIMEOUT_RESOLUTION 50 /* ms */
|
|
|
|
#define FLAG_NONE 0
|
|
#define FLAG_TYPE_AX88179 (1U << 0)
|
|
#define FLAG_TYPE_AX88178a (1U << 1)
|
|
#define FLAG_TYPE_DLINK_DUB1312 (1U << 2)
|
|
#define FLAG_TYPE_SITECOM (1U << 3)
|
|
#define FLAG_TYPE_SAMSUNG (1U << 4)
|
|
#define FLAG_TYPE_LENOVO (1U << 5)
|
|
|
|
/* local vars */
|
|
static const struct {
|
|
unsigned char ctrl, timer_l, timer_h, size, ifg;
|
|
} AX88179_BULKIN_SIZE[] = {
|
|
{7, 0x4f, 0, 0x02, 0xff},
|
|
{7, 0x20, 3, 0x03, 0xff},
|
|
{7, 0xae, 7, 0x04, 0xff},
|
|
{7, 0xcc, 0x4c, 0x04, 8},
|
|
};
|
|
|
|
static int curr_eth_dev; /* index for name of next device detected */
|
|
|
|
/* driver private */
|
|
struct asix_private {
|
|
int flags;
|
|
int rx_urb_size;
|
|
int maxpacketsize;
|
|
};
|
|
|
|
/*
|
|
* Asix infrastructure commands
|
|
*/
|
|
static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
|
|
|
|
debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
|
|
cmd, value, index, size);
|
|
|
|
memcpy(buf, data, size);
|
|
|
|
len = usb_control_msg(
|
|
dev->pusb_dev,
|
|
usb_sndctrlpipe(dev->pusb_dev, 0),
|
|
cmd,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
value,
|
|
index,
|
|
buf,
|
|
size,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
|
|
return len == size ? 0 : ECOMM;
|
|
}
|
|
|
|
static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
|
|
|
|
debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
|
|
cmd, value, index, size);
|
|
|
|
len = usb_control_msg(
|
|
dev->pusb_dev,
|
|
usb_rcvctrlpipe(dev->pusb_dev, 0),
|
|
cmd,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
value,
|
|
index,
|
|
buf,
|
|
size,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
|
|
memcpy(data, buf, size);
|
|
|
|
return len == size ? 0 : ECOMM;
|
|
}
|
|
|
|
static int asix_read_mac(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
u8 buf[ETH_ALEN];
|
|
|
|
asix_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, 6, 6, buf);
|
|
debug("asix_read_mac() returning %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
|
|
|
|
memcpy(eth->enetaddr, buf, ETH_ALEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asix_write_mac(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
int ret;
|
|
|
|
ret = asix_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
|
|
ETH_ALEN, eth->enetaddr);
|
|
if (ret < 0)
|
|
debug("Failed to set MAC address: %02x\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asix_basic_reset(struct ueth_data *dev)
|
|
{
|
|
struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv;
|
|
u8 buf[5];
|
|
u16 *tmp16;
|
|
u8 *tmp;
|
|
|
|
tmp16 = (u16 *)buf;
|
|
tmp = (u8 *)buf;
|
|
|
|
/* Power up ethernet PHY */
|
|
*tmp16 = 0;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
|
|
|
|
*tmp16 = AX_PHYPWR_RSTCTL_IPRL;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
|
|
mdelay(200);
|
|
|
|
*tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
|
|
mdelay(200);
|
|
|
|
/* RX bulk configuration */
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
|
|
|
|
dev_priv->rx_urb_size = 128 * 20;
|
|
|
|
/* Water Level configuration */
|
|
*tmp = 0x34;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
|
|
|
|
*tmp = 0x52;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH, 1, 1, tmp);
|
|
|
|
/* Enable checksum offload */
|
|
*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
|
|
AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
|
|
|
|
*tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
|
|
AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
|
|
|
|
/* Configure RX control register => start operation */
|
|
*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
|
|
AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
|
|
|
|
*tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
|
|
AX_MONITOR_MODE_RWMP;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
|
|
|
|
/* Configure default medium type => giga */
|
|
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
|
|
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
|
|
AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16);
|
|
|
|
u16 adv = 0;
|
|
adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK |
|
|
ADVERTISE_NPAGE | ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP;
|
|
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv);
|
|
|
|
adv = ADVERTISE_1000FULL;
|
|
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asix_wait_link(struct ueth_data *dev)
|
|
{
|
|
int timeout = 0;
|
|
int link_detected;
|
|
u8 buf[2];
|
|
u16 *tmp16;
|
|
|
|
tmp16 = (u16 *)buf;
|
|
|
|
do {
|
|
asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
|
|
MII_BMSR, 2, buf);
|
|
link_detected = *tmp16 & BMSR_LSTATUS;
|
|
if (!link_detected) {
|
|
if (timeout == 0)
|
|
printf("Waiting for Ethernet connection... ");
|
|
mdelay(TIMEOUT_RESOLUTION);
|
|
timeout += TIMEOUT_RESOLUTION;
|
|
}
|
|
} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
|
|
|
|
if (link_detected) {
|
|
if (timeout > 0)
|
|
printf("done.\n");
|
|
return 0;
|
|
} else {
|
|
printf("unable to connect.\n");
|
|
return -ENETUNREACH;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Asix callbacks
|
|
*/
|
|
static int asix_init(struct eth_device *eth, bd_t *bd)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv;
|
|
u8 buf[2], tmp[5], link_sts;
|
|
u16 *tmp16, mode;
|
|
|
|
|
|
tmp16 = (u16 *)buf;
|
|
|
|
debug("** %s()\n", __func__);
|
|
|
|
/* Configure RX control register => start operation */
|
|
*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
|
|
AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
|
|
if (asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16) != 0)
|
|
goto out_err;
|
|
|
|
if (asix_wait_link(dev) != 0) {
|
|
/*reset device and try again*/
|
|
printf("Reset Ethernet Device\n");
|
|
asix_basic_reset(dev);
|
|
if (asix_wait_link(dev) != 0)
|
|
goto out_err;
|
|
}
|
|
|
|
/* Configure link */
|
|
mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
|
|
AX_MEDIUM_RXFLOW_CTRLEN;
|
|
|
|
asix_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
|
|
1, 1, &link_sts);
|
|
|
|
asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
|
|
GMII_PHY_PHYSR, 2, tmp16);
|
|
|
|
if (!(*tmp16 & GMII_PHY_PHYSR_LINK)) {
|
|
return 0;
|
|
} else if (GMII_PHY_PHYSR_GIGA == (*tmp16 & GMII_PHY_PHYSR_SMASK)) {
|
|
mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ |
|
|
AX_MEDIUM_JUMBO_EN;
|
|
|
|
if (link_sts & AX_USB_SS)
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
|
|
else if (link_sts & AX_USB_HS)
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
|
|
else
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
} else if (GMII_PHY_PHYSR_100 == (*tmp16 & GMII_PHY_PHYSR_SMASK)) {
|
|
mode |= AX_MEDIUM_PS;
|
|
|
|
if (link_sts & (AX_USB_SS | AX_USB_HS))
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
|
|
else
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
} else {
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
}
|
|
|
|
/* RX bulk configuration */
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
|
|
|
|
dev_priv->rx_urb_size = (1024 * (tmp[3] + 2));
|
|
if (*tmp16 & GMII_PHY_PHYSR_FULL)
|
|
mode |= AX_MEDIUM_FULL_DUPLEX;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
|
|
2, 2, &mode);
|
|
|
|
return 0;
|
|
out_err:
|
|
return -1;
|
|
}
|
|
|
|
static int asix_send(struct eth_device *eth, void *packet, int length)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv;
|
|
|
|
int err;
|
|
u32 packet_len, tx_hdr2;
|
|
int actual_len, framesize;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
|
|
PKTSIZE + (2 * sizeof(packet_len)));
|
|
|
|
debug("** %s(), len %d\n", __func__, length);
|
|
|
|
packet_len = length;
|
|
cpu_to_le32s(&packet_len);
|
|
|
|
memcpy(msg, &packet_len, sizeof(packet_len));
|
|
framesize = dev_priv->maxpacketsize;
|
|
tx_hdr2 = 0;
|
|
if (((length + 8) % framesize) == 0)
|
|
tx_hdr2 |= 0x80008000; /* Enable padding */
|
|
|
|
cpu_to_le32s(&tx_hdr2);
|
|
|
|
memcpy(msg + sizeof(packet_len), &tx_hdr2, sizeof(tx_hdr2));
|
|
|
|
memcpy(msg + sizeof(packet_len) + sizeof(tx_hdr2),
|
|
(void *)packet, length);
|
|
|
|
err = usb_bulk_msg(dev->pusb_dev,
|
|
usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
|
|
(void *)msg,
|
|
length + sizeof(packet_len) + sizeof(tx_hdr2),
|
|
&actual_len,
|
|
USB_BULK_SEND_TIMEOUT);
|
|
debug("Tx: len = %u, actual = %u, err = %d\n",
|
|
length + sizeof(packet_len), actual_len, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int asix_recv(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv;
|
|
|
|
u16 frame_pos;
|
|
int err;
|
|
int actual_len;
|
|
|
|
int pkt_cnt;
|
|
u32 rx_hdr;
|
|
u16 hdr_off;
|
|
u32 *pkt_hdr;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, recv_buf, dev_priv->rx_urb_size);
|
|
|
|
actual_len = -1;
|
|
|
|
debug("** %s()\n", __func__);
|
|
|
|
err = usb_bulk_msg(dev->pusb_dev,
|
|
usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
|
|
(void *)recv_buf,
|
|
dev_priv->rx_urb_size,
|
|
&actual_len,
|
|
USB_BULK_RECV_TIMEOUT);
|
|
debug("Rx: len = %u, actual = %u, err = %d\n", dev_priv->rx_urb_size,
|
|
actual_len, err);
|
|
|
|
if (err != 0) {
|
|
debug("Rx: failed to receive\n");
|
|
return -ECOMM;
|
|
}
|
|
if (actual_len > dev_priv->rx_urb_size) {
|
|
debug("Rx: received too many bytes %d\n", actual_len);
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
|
|
rx_hdr = *(u32 *)(recv_buf + actual_len - 4);
|
|
le32_to_cpus(&pkt_hdr);
|
|
|
|
pkt_cnt = (u16)rx_hdr;
|
|
hdr_off = (u16)(rx_hdr >> 16);
|
|
pkt_hdr = (u32 *)(recv_buf + hdr_off);
|
|
|
|
|
|
frame_pos = 0;
|
|
|
|
while (pkt_cnt--) {
|
|
u16 pkt_len;
|
|
|
|
le32_to_cpus(pkt_hdr);
|
|
pkt_len = (*pkt_hdr >> 16) & 0x1fff;
|
|
|
|
frame_pos += 2;
|
|
|
|
NetReceive(recv_buf + frame_pos, pkt_len);
|
|
|
|
pkt_hdr++;
|
|
frame_pos += ((pkt_len + 7) & 0xFFF8)-2;
|
|
|
|
if (pkt_cnt == 0)
|
|
return 0;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void asix_halt(struct eth_device *eth)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* Asix probing functions
|
|
*/
|
|
void ax88179_eth_before_probe(void)
|
|
{
|
|
curr_eth_dev = 0;
|
|
}
|
|
|
|
struct asix_dongle {
|
|
unsigned short vendor;
|
|
unsigned short product;
|
|
int flags;
|
|
};
|
|
|
|
static const struct asix_dongle asix_dongles[] = {
|
|
{ 0x0b95, 0x1790, FLAG_TYPE_AX88179 },
|
|
{ 0x0b95, 0x178a, FLAG_TYPE_AX88178a },
|
|
{ 0x2001, 0x4a00, FLAG_TYPE_DLINK_DUB1312 },
|
|
{ 0x0df6, 0x0072, FLAG_TYPE_SITECOM },
|
|
{ 0x04e8, 0xa100, FLAG_TYPE_SAMSUNG },
|
|
{ 0x17ef, 0x304b, FLAG_TYPE_LENOVO },
|
|
{ 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */
|
|
};
|
|
|
|
/* Probe to see if a new device is actually an asix device */
|
|
int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum,
|
|
struct ueth_data *ss)
|
|
{
|
|
struct usb_interface *iface;
|
|
struct usb_interface_descriptor *iface_desc;
|
|
struct asix_private *dev_priv;
|
|
int ep_in_found = 0, ep_out_found = 0;
|
|
int i;
|
|
|
|
/* let's examine the device now */
|
|
iface = &dev->config.if_desc[ifnum];
|
|
iface_desc = &dev->config.if_desc[ifnum].desc;
|
|
|
|
for (i = 0; asix_dongles[i].vendor != 0; i++) {
|
|
if (dev->descriptor.idVendor == asix_dongles[i].vendor &&
|
|
dev->descriptor.idProduct == asix_dongles[i].product)
|
|
/* Found a supported dongle */
|
|
break;
|
|
}
|
|
|
|
if (asix_dongles[i].vendor == 0)
|
|
return 0;
|
|
|
|
memset(ss, 0, sizeof(struct ueth_data));
|
|
|
|
/* At this point, we know we've got a live one */
|
|
debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
|
|
dev->descriptor.idVendor, dev->descriptor.idProduct);
|
|
|
|
/* Initialize the ueth_data structure with some useful info */
|
|
ss->ifnum = ifnum;
|
|
ss->pusb_dev = dev;
|
|
ss->subclass = iface_desc->bInterfaceSubClass;
|
|
ss->protocol = iface_desc->bInterfaceProtocol;
|
|
|
|
/* alloc driver private */
|
|
ss->dev_priv = calloc(1, sizeof(struct asix_private));
|
|
if (!ss->dev_priv)
|
|
return 0;
|
|
dev_priv = ss->dev_priv;
|
|
dev_priv->flags = asix_dongles[i].flags;
|
|
|
|
/*
|
|
* We are expecting a minimum of 3 endpoints - in, out (bulk), and
|
|
* int. We will ignore any others.
|
|
*/
|
|
for (i = 0; i < iface_desc->bNumEndpoints; i++) {
|
|
/* is it an interrupt endpoint? */
|
|
if ((iface->ep_desc[i].bmAttributes &
|
|
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
|
|
ss->ep_int = iface->ep_desc[i].bEndpointAddress &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
ss->irqinterval = iface->ep_desc[i].bInterval;
|
|
continue;
|
|
}
|
|
|
|
/* is it an BULK endpoint? */
|
|
if (!((iface->ep_desc[i].bmAttributes &
|
|
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
|
|
continue;
|
|
|
|
u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
|
|
if ((ep_addr & USB_DIR_IN) && !ep_in_found) {
|
|
ss->ep_in = ep_addr &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
ep_in_found = 1;
|
|
}
|
|
if (!(ep_addr & USB_DIR_IN) && !ep_out_found) {
|
|
ss->ep_out = ep_addr &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
dev_priv->maxpacketsize =
|
|
dev->epmaxpacketout[AX_ENDPOINT_OUT];
|
|
ep_out_found = 1;
|
|
}
|
|
}
|
|
debug("Endpoints In %d Out %d Int %d\n",
|
|
ss->ep_in, ss->ep_out, ss->ep_int);
|
|
|
|
/* Do some basic sanity checks, and bail if we find a problem */
|
|
if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
|
|
!ss->ep_in || !ss->ep_out || !ss->ep_int) {
|
|
debug("Problems with device\n");
|
|
return 0;
|
|
}
|
|
dev->privptr = (void *)ss;
|
|
return 1;
|
|
}
|
|
|
|
int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
|
|
struct eth_device *eth)
|
|
{
|
|
if (!eth) {
|
|
debug("%s: missing parameter.\n", __func__);
|
|
return 0;
|
|
}
|
|
sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++);
|
|
eth->init = asix_init;
|
|
eth->send = asix_send;
|
|
eth->recv = asix_recv;
|
|
eth->halt = asix_halt;
|
|
eth->write_hwaddr = asix_write_mac;
|
|
eth->priv = ss;
|
|
|
|
if (asix_basic_reset(ss))
|
|
return 0;
|
|
|
|
/* Get the MAC address */
|
|
if (asix_read_mac(eth))
|
|
return 0;
|
|
debug("MAC %pM\n", eth->enetaddr);
|
|
|
|
return 1;
|
|
}
|