Vladimir Oltean e7005b3e80 fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delays ... Communication with some SPI slaves just won't cut it if these delays (before the beginning, and after the end of a transfer) are not added to the Chip Select signal. These are a straight copy from Linux: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt drivers/spi/spi-fsl-dspi.c Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>		2020-07-27 14:16:26 +05:30
..
soft-spi.txt	doc: bindings: soft-spi: update documentation to match the code	2018-01-10 12:06:15 +05:30
spi-atcspi200.txt	doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor	2019-04-12 10:54:27 +05:30
spi-ath79.txt	drivers: spi: add spi support for QCA/Atheros ath79 SOCs	2016-05-21 01:25:50 +02:00
spi-bus.txt	Fix spelling of "transferred".	2016-03-22 12:16:16 -04:00
spi-cadence.txt	spi: cadence_qspi: use "cdns,qspi-nor" as compatible	2018-11-29 12:45:15 +01:00
spi-mcf-dspi.txt	fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delays	2020-07-27 14:16:26 +05:30
spi-stm32-qspi.txt	doc: device-tree-bindings: alignment with v5.2-rc6 for spi-stm32-qspi.txt	2019-07-22 11:04:52 +02:00
spi-zynq-qspi.txt	doc: device-tree-bindings: spi: Add zynq qspi info	2015-10-25 20:17:01 +05:30
spi-zynq.txt	spi: Fix zynq SPI binding	2015-07-28 11:56:22 +02:00
spi_altera.txt	spi : convert altera_spi to driver model	2015-10-23 07:36:56 +08:00