mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 21:54:45 +00:00
2600ba6de0
This updates the device-tree-bindings doc for x86-pinctrl driver: - clarify "gpio-offset" is required only when "mode-gpio" is set - correct property name "pull-strength" - use tab instead of space at several places Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
33 lines
1.3 KiB
Text
33 lines
1.3 KiB
Text
Intel x86 PINCTRL/GPIO controller
|
|
|
|
Pin-muxing on x86 can be described with a node for the PINCTRL master
|
|
node and a set of child nodes for each pin on the SoC.
|
|
|
|
The PINCTRL master node requires the following properties:
|
|
- compatible : "intel,x86-pinctrl"
|
|
|
|
Pin nodes must be children of the pinctrl master node and can
|
|
contain the following properties:
|
|
- pad-offset - (required) offset in the IOBASE for the pin to configure
|
|
- gpio-offset - (required only when 'mode-gpio' is set) 2 cells
|
|
- offset in the GPIOBASE for the pin to configure
|
|
- the bit shift in this register (4 = bit 4)
|
|
- mode-gpio - (optional) standalone property to force the pin into GPIO mode
|
|
- mode-func - (optional) function number to assign to the pin. If
|
|
'mode-gpio' is set, this property will be ignored.
|
|
in case of 'mode-gpio' property set:
|
|
- output-value - (optional) this set the default output value of the GPIO
|
|
- direction - (optional) this set the direction of the gpio
|
|
- pull-strength - (optional) this set the pull strength of the pin
|
|
- pull-assign - (optional) this set the pull assignement (up/down) of the pin
|
|
- invert - (optional) this input pin is inverted
|
|
|
|
Example:
|
|
|
|
pin_usb_host_en0@0 {
|
|
gpio-offset = <0x80 8>;
|
|
pad-offset = <0x260>;
|
|
mode-gpio;
|
|
output-value = <1>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|