u-boot/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
Kevin Smith 544acb07ec arm: mvebu: a38x: Remove unsupported topologies
A lot of extra configuration information was left over in the
Marvell serdes and DDR3 initialization code for boards that
U-boot does not support.  Remove this extra config information,
and the concept of fixing up board topologies with information
loaded from an EEPROM.  If this needs to be done, it should be
handled in the board file, not in core code.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-11-17 23:41:41 +01:00

369 lines
11 KiB
C

/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _SYS_ENV_LIB_H
#define _SYS_ENV_LIB_H
#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
#include "../../../drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h"
/* Serdes definitions */
#define COMMON_PHY_BASE_ADDR 0x18300
#define DEVICE_CONFIGURATION_REG0 0x18284
#define DEVICE_CONFIGURATION_REG1 0x18288
#define COMMON_PHY_CONFIGURATION1_REG 0x18300
#define COMMON_PHY_CONFIGURATION2_REG 0x18304
#define COMMON_PHY_CONFIGURATION4_REG 0x1830c
#define COMMON_PHY_STATUS1_REG 0x18318
#define COMMON_PHYS_SELECTORS_REG 0x183fc
#define SOC_CONTROL_REG1 0x18204
#define GENERAL_PURPOSE_RESERVED0_REG 0x182e0
#define GBE_CONFIGURATION_REG 0x18460
#define DEVICE_SAMPLE_AT_RESET1_REG 0x18600
#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604
#define DEV_ID_REG 0x18238
#define CORE_PLL_PARAMETERS_REG 0xe42e0
#define CORE_PLL_CONFIG_REG 0xe42e4
#define QSGMII_CONTROL_REG1 0x18494
#define DEV_ID_REG_DEVICE_ID_OFFS 16
#define DEV_ID_REG_DEVICE_ID_MASK 0xffff0000
#define SAR_DEV_ID_OFFS 27
#define SAR_DEV_ID_MASK 0x7
#define POWER_AND_PLL_CTRL_REG 0xa0004
#define CALIBRATION_CTRL_REG 0xa0008
#define DFE_REG0 0xa001c
#define DFE_REG3 0xa0028
#define RESET_DFE_REG 0xa0148
#define LOOPBACK_REG 0xa008c
#define SYNC_PATTERN_REG 0xa0090
#define INTERFACE_REG 0xa0094
#define ISOLATE_REG 0xa0098
#define MISC_REG 0xa013c
#define GLUE_REG 0xa0140
#define GENERATION_DIVIDER_FORCE_REG 0xa0144
#define PCIE_REG0 0xa0120
#define LANE_ALIGN_REG0 0xa0124
#define SQUELCH_FFE_SETTING_REG 0xa0018
#define G1_SETTINGS_0_REG 0xa0034
#define G1_SETTINGS_1_REG 0xa0038
#define G1_SETTINGS_3_REG 0xa0440
#define G1_SETTINGS_4_REG 0xa0444
#define G2_SETTINGS_0_REG 0xa003c
#define G2_SETTINGS_1_REG 0xa0040
#define G2_SETTINGS_2_REG 0xa00f8
#define G2_SETTINGS_3_REG 0xa0448
#define G2_SETTINGS_4_REG 0xa044c
#define G3_SETTINGS_0_REG 0xa0044
#define G3_SETTINGS_1_REG 0xa0048
#define G3_SETTINGS_3_REG 0xa0450
#define G3_SETTINGS_4_REG 0xa0454
#define VTHIMPCAL_CTRL_REG 0xa0104
#define REF_REG0 0xa0134
#define CAL_REG6 0xa0168
#define RX_REG2 0xa0184
#define RX_REG3 0xa0188
#define PCIE_REG1 0xa0288
#define PCIE_REG3 0xa0290
#define LANE_CFG1_REG 0xa0604
#define LANE_CFG4_REG 0xa0620
#define LANE_CFG5_REG 0xa0624
#define GLOBAL_CLK_CTRL 0xa0704
#define GLOBAL_MISC_CTRL 0xa0718
#define GLOBAL_CLK_SRC_HI 0xa0710
#define GLOBAL_CLK_CTRL 0xa0704
#define GLOBAL_MISC_CTRL 0xa0718
#define GLOBAL_PM_CTRL 0xa0740
/* SATA registers */
#define SATA_CTRL_REG_IND_ADDR 0xa80a0
#define SATA_CTRL_REG_IND_DATA 0xa80a4
#define SATA_VENDOR_PORT_0_REG_ADDR 0xa8178
#define SATA_VENDOR_PORT_1_REG_ADDR 0xa81f8
#define SATA_VENDOR_PORT_0_REG_DATA 0xa817c
#define SATA_VENDOR_PORT_1_REG_DATA 0xa81fc
/* Reference clock values and mask */
#define POWER_AND_PLL_CTRL_REG_100MHZ_VAL 0x0
#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1 0x1
#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2 0x2
#define POWER_AND_PLL_CTRL_REG_40MHZ_VAL 0x3
#define GLOBAL_PM_CTRL_REG_25MHZ_VAL 0x7
#define GLOBAL_PM_CTRL_REG_40MHZ_VAL 0xc
#define LANE_CFG4_REG_25MHZ_VAL 0x200
#define LANE_CFG4_REG_40MHZ_VAL 0x300
#define POWER_AND_PLL_CTRL_REG_MASK (~(0x1f))
#define GLOBAL_PM_CTRL_REG_MASK (~(0xff))
#define LANE_CFG4_REG_MASK (~(0x1f00))
#define REF_CLK_SELECTOR_VAL_PEX0(reg_val) (reg_val >> 2) & 0x1
#define REF_CLK_SELECTOR_VAL_PEX1(reg_val) (reg_val >> 3) & 0x1
#define REF_CLK_SELECTOR_VAL_PEX2(reg_val) (reg_val >> 30) & 0x1
#define REF_CLK_SELECTOR_VAL_PEX3(reg_val) (reg_val >> 31) & 0x1
#define REF_CLK_SELECTOR_VAL(reg_val) (reg_val & 0x1)
#define MAX_SELECTOR_VAL 10
/* TWSI addresses */
/* starting from A38x A0, i2c address of EEPROM is 0x57 */
#ifdef CONFIG_ARMADA_39X
#define EEPROM_I2C_ADDR 0x50
#else
#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \
MV_88F68XX_Z1_ID ? 0x50 : 0x57)
#endif
#define RD_GET_MODE_ADDR 0x4c
#define DB_GET_MODE_SLM1363_ADDR 0x25
#define DB_GET_MODE_SLM1364_ADDR 0x24
#define DB381_GET_MODE_SLM1426_1427_ADDR 0x56
/* DB-BP Board 'SatR' mapping */
#define SATR_DB_LANE1_MAX_OPTIONS 7
#define SATR_DB_LANE1_CFG_MASK 0x7
#define SATR_DB_LANE1_CFG_OFFSET 0
#define SATR_DB_LANE2_MAX_OPTIONS 4
#define SATR_DB_LANE2_CFG_MASK 0x38
#define SATR_DB_LANE2_CFG_OFFSET 3
/* GP Board 'SatR' mapping */
#define SATR_GP_LANE1_CFG_MASK 0x4
#define SATR_GP_LANE1_CFG_OFFSET 2
#define SATR_GP_LANE2_CFG_MASK 0x8
#define SATR_GP_LANE2_CFG_OFFSET 3
/* For setting MPP2 and MPP3 to be TWSI mode and MPP 0,1 to UART mode */
#define MPP_CTRL_REG 0x18000
#define MPP_SET_MASK (~(0xffff))
#define MPP_SET_DATA (0x1111)
#define MPP_UART1_SET_MASK (~(0xff000))
#define MPP_UART1_SET_DATA (0x66000)
#define AVS_DEBUG_CNTR_REG 0xe4124
#define AVS_DEBUG_CNTR_DEFAULT_VALUE 0x08008073
#define AVS_ENABLED_CONTROL 0xe4130
#define AVS_LOW_VDD_LIMIT_OFFS 4
#define AVS_LOW_VDD_LIMIT_MASK (0xff << AVS_LOW_VDD_LIMIT_OFFS)
#define AVS_LOW_VDD_LIMIT_VAL (0x27 << AVS_LOW_VDD_LIMIT_OFFS)
#define AVS_HIGH_VDD_LIMIT_OFFS 12
#define AVS_HIGH_VDD_LIMIT_MASK (0xff << AVS_HIGH_VDD_LIMIT_OFFS)
#define AVS_HIGH_VDD_LIMIT_VAL (0x27 << AVS_HIGH_VDD_LIMIT_OFFS)
/* Board ID numbers */
#define MARVELL_BOARD_ID_MASK 0x10
/* Customer boards for A38x */
#define A38X_CUSTOMER_BOARD_ID_BASE 0x0
#define A38X_CUSTOMER_BOARD_ID0 (A38X_CUSTOMER_BOARD_ID_BASE + 0)
#define A38X_CUSTOMER_BOARD_ID1 (A38X_CUSTOMER_BOARD_ID_BASE + 1)
#define A38X_MV_MAX_CUSTOMER_BOARD_ID (A38X_CUSTOMER_BOARD_ID_BASE + 2)
#define A38X_MV_CUSTOMER_BOARD_NUM (A38X_MV_MAX_CUSTOMER_BOARD_ID - \
A38X_CUSTOMER_BOARD_ID_BASE)
/* Marvell boards for A38x */
#define A38X_MARVELL_BOARD_ID_BASE 0x10
#define RD_NAS_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 0)
#define DB_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 1)
#define RD_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 2)
#define DB_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 3)
#define DB_GP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 4)
#define DB_BP_6821_ID (A38X_MARVELL_BOARD_ID_BASE + 5)
#define DB_AMC_6820_ID (A38X_MARVELL_BOARD_ID_BASE + 6)
#define A38X_MV_MAX_MARVELL_BOARD_ID (A38X_MARVELL_BOARD_ID_BASE + 7)
#define A38X_MV_MARVELL_BOARD_NUM (A38X_MV_MAX_MARVELL_BOARD_ID - \
A38X_MARVELL_BOARD_ID_BASE)
/* Customer boards for A39x */
#define A39X_CUSTOMER_BOARD_ID_BASE 0x20
#define A39X_CUSTOMER_BOARD_ID0 (A39X_CUSTOMER_BOARD_ID_BASE + 0)
#define A39X_CUSTOMER_BOARD_ID1 (A39X_CUSTOMER_BOARD_ID_BASE + 1)
#define A39X_MV_MAX_CUSTOMER_BOARD_ID (A39X_CUSTOMER_BOARD_ID_BASE + 2)
#define A39X_MV_CUSTOMER_BOARD_NUM (A39X_MV_MAX_CUSTOMER_BOARD_ID - \
A39X_CUSTOMER_BOARD_ID_BASE)
/* Marvell boards for A39x */
#define A39X_MARVELL_BOARD_ID_BASE 0x30
#define A39X_DB_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 0)
#define A39X_RD_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 1)
#define A39X_MV_MAX_MARVELL_BOARD_ID (A39X_MARVELL_BOARD_ID_BASE + 2)
#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \
A39X_MARVELL_BOARD_ID_BASE)
#ifdef CONFIG_ARMADA_38X
#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE
#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0
#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1
#define MV_MAX_CUSTOMER_BOARD_ID A38X_MV_MAX_CUSTOMER_BOARD_ID
#define MV_CUSTOMER_BOARD_NUM A38X_MV_CUSTOMER_BOARD_NUM
#define MARVELL_BOARD_ID_BASE A38X_MARVELL_BOARD_ID_BASE
#define MV_MAX_MARVELL_BOARD_ID A38X_MV_MAX_MARVELL_BOARD_ID
#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM
#define MV_DEFAULT_BOARD_ID DB_68XX_ID
#define MV_DEFAULT_DEVICE_ID MV_6811
#elif defined(CONFIG_ARMADA_39X)
#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE
#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0
#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1
#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID
#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM
#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE
#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID
#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM
#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID
#define MV_DEFAULT_DEVICE_ID MV_6920
#endif
#define MV_INVALID_BOARD_ID 0xffffffff
/* device revesion */
#define DEV_VERSION_ID_REG 0x1823c
#define REVISON_ID_OFFS 8
#define REVISON_ID_MASK 0xf00
/* A38x revisions */
#define MV_88F68XX_Z1_ID 0x0
#define MV_88F68XX_A0_ID 0x4
/* A39x revisions */
#define MV_88F69XX_Z1_ID 0x2
#define MPP_CONTROL_REG(id) (0x18000 + (id * 4))
#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00)
#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04)
#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10)
#define MV_GPP_REGS_BASE(unit) (0x18100 + ((unit) * 0x40))
#define MPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 8)
#define MPP_MASK(GPIO_NUM) (0xf << 4 * (GPIO_NUM - \
(MPP_REG_NUM(GPIO_NUM) * 8)));
#define GPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 32)
#define GPP_MASK(GPIO_NUM) (1 << GPIO_NUM % 32)
/* device ID */
/* Armada 38x Family */
#define MV_6810_DEV_ID 0x6810
#define MV_6811_DEV_ID 0x6811
#define MV_6820_DEV_ID 0x6820
#define MV_6828_DEV_ID 0x6828
/* Armada 39x Family */
#define MV_6920_DEV_ID 0x6920
#define MV_6928_DEV_ID 0x6928
enum {
MV_6810,
MV_6820,
MV_6811,
MV_6828,
MV_NONE,
MV_6920,
MV_6928,
MV_MAX_DEV_ID,
};
#define MV_6820_INDEX 0
#define MV_6810_INDEX 1
#define MV_6811_INDEX 2
#define MV_6828_INDEX 3
#define MV_6920_INDEX 0
#define MV_6928_INDEX 1
#ifdef CONFIG_ARMADA_38X
#define MAX_DEV_ID_NUM 4
#else
#define MAX_DEV_ID_NUM 2
#endif
#define MV_6820_INDEX 0
#define MV_6810_INDEX 1
#define MV_6811_INDEX 2
#define MV_6828_INDEX 3
#define MV_6920_INDEX 0
#define MV_6928_INDEX 1
enum unit_id {
PEX_UNIT_ID,
ETH_GIG_UNIT_ID,
USB3H_UNIT_ID,
USB3D_UNIT_ID,
SATA_UNIT_ID,
QSGMII_UNIT_ID,
XAUI_UNIT_ID,
RXAUI_UNIT_ID,
MAX_UNITS_ID
};
struct board_wakeup_gpio {
u32 board_id;
int gpio_num;
};
enum suspend_wakeup_status {
SUSPEND_WAKEUP_DISABLED,
SUSPEND_WAKEUP_ENABLED,
SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED,
};
/*
* GPIO status indication for Suspend Wakeup:
* If suspend to RAM is supported and GPIO inidcation is implemented,
* set the gpio number
* If suspend to RAM is supported but GPIO indication is not implemented
* set '-2'
* If suspend to RAM is not supported set '-1'
*/
#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
};
#else
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{A39X_CUSTOMER_BOARD_ID0, -1 }, \
{A39X_CUSTOMER_BOARD_ID0, -1 }, \
};
#endif /* CONFIG_ARMADA_38X */
#else
#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{RD_NAS_68XX_ID, -2 }, \
{DB_68XX_ID, -1 }, \
{RD_AP_68XX_ID, -2 }, \
{DB_AP_68XX_ID, -2 }, \
{DB_GP_68XX_ID, -2 }, \
{DB_BP_6821_ID, -2 }, \
{DB_AMC_6820_ID, -2 }, \
};
#else
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{A39X_RD_69XX_ID, -1 }, \
{A39X_DB_69XX_ID, -1 }, \
};
#endif /* CONFIG_ARMADA_38X */
#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
u32 mv_board_tclk_get(void);
u32 mv_board_id_get(void);
u32 mv_board_id_index_get(u32 board_id);
u32 sys_env_unit_max_num_get(enum unit_id unit);
enum suspend_wakeup_status sys_env_suspend_wakeup_check(void);
u8 sys_env_device_rev_get(void);
u32 sys_env_device_id_get(void);
u16 sys_env_model_get(void);
struct dlb_config *sys_env_dlb_config_ptr_get(void);
u32 sys_env_get_cs_ena_from_reg(void);
#endif /* _SYS_ENV_LIB_H */