mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
a13110a99f
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
57 lines
1.2 KiB
Text
57 lines
1.2 KiB
Text
/*
|
|
* Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
|
|
*
|
|
* Minimal dts for a SPL FIT image payload.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+ X11
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
|
|
#address-cells = <1>;
|
|
|
|
images {
|
|
uboot@1 {
|
|
description = "U-Boot (64-bit)";
|
|
data = /incbin/("../../../u-boot-nodtb.bin");
|
|
type = "standalone";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x00200000>;
|
|
};
|
|
atf@1 {
|
|
description = "ARM Trusted Firmware";
|
|
data = /incbin/("../../../bl31.bin");
|
|
type = "firmware";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x00001000>;
|
|
entry = <0x00001000>;
|
|
};
|
|
pmu@1 {
|
|
description = "Cortex-M0 firmware";
|
|
data = /incbin/("../../../rk3399m0.bin");
|
|
type = "pmu-firmware";
|
|
compression = "none";
|
|
load = <0xff8c0000>;
|
|
};
|
|
fdt@1 {
|
|
description = "RK3399-Q7 (Puma) flat device-tree";
|
|
data = /incbin/("../../../u-boot.dtb");
|
|
type = "flat_dt";
|
|
compression = "none";
|
|
};
|
|
};
|
|
|
|
configurations {
|
|
default = "conf@1";
|
|
conf@1 {
|
|
description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
|
|
firmware = "uboot@1";
|
|
loadables = "atf@1";
|
|
fdt = "fdt@1";
|
|
};
|
|
};
|
|
};
|