mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
f6301702c1
With DM_ETH being required now for all drivers, we don't need this listed on individual drivers as well. Signed-off-by: Tom Rini <trini@konsulko.com>
363 lines
9.9 KiB
Text
363 lines
9.9 KiB
Text
|
|
config BITBANGMII
|
|
bool "Bit-banged ethernet MII management channel support"
|
|
|
|
config BITBANGMII_MULTI
|
|
bool "Enable the multi bus support"
|
|
depends on BITBANGMII
|
|
|
|
config MV88E6352_SWITCH
|
|
bool "Marvell 88E6352 switch support"
|
|
|
|
menuconfig PHYLIB
|
|
bool "Ethernet PHY (physical media interface) support"
|
|
depends on NET
|
|
help
|
|
Enable Ethernet PHY (physical media interface) support.
|
|
|
|
if PHYLIB
|
|
|
|
config PHY_ADDR_ENABLE
|
|
bool "Limit phy address"
|
|
default y if ARCH_SUNXI
|
|
help
|
|
Select this if you want to control which phy address is used
|
|
|
|
if PHY_ADDR_ENABLE
|
|
config PHY_ADDR
|
|
int "PHY address"
|
|
default 1 if ARCH_SUNXI
|
|
default 0
|
|
help
|
|
The address of PHY on MII bus. Usually in range of 0 to 31.
|
|
endif
|
|
|
|
config B53_SWITCH
|
|
bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
|
|
help
|
|
Enable support for Broadcom BCM53xx (RoboSwitch) Ethernet switches.
|
|
This currently supports BCM53125 and similar models.
|
|
|
|
if B53_SWITCH
|
|
|
|
config B53_CPU_PORT
|
|
int "CPU port"
|
|
default 8
|
|
|
|
config B53_PHY_PORTS
|
|
hex "Bitmask of PHY ports"
|
|
|
|
endif # B53_SWITCH
|
|
|
|
config MV88E61XX_SWITCH
|
|
bool "Marvell MV88E61xx Ethernet switch PHY support."
|
|
|
|
if MV88E61XX_SWITCH
|
|
|
|
config MV88E61XX_CPU_PORT
|
|
int "CPU Port"
|
|
|
|
config MV88E61XX_PHY_PORTS
|
|
hex "Bitmask of PHY Ports"
|
|
|
|
config MV88E61XX_FIXED_PORTS
|
|
hex "Bitmask of PHYless serdes Ports"
|
|
|
|
endif # MV88E61XX_SWITCH
|
|
|
|
config PHYLIB_10G
|
|
bool "Generic 10G PHY support"
|
|
|
|
config PHY_ADIN
|
|
bool "Analog Devices Industrial Ethernet PHYs"
|
|
help
|
|
Add support for configuring RGMII on Analog Devices ADIN PHYs.
|
|
|
|
menuconfig PHY_AQUANTIA
|
|
bool "Aquantia Ethernet PHYs support"
|
|
select PHY_GIGE
|
|
select PHYLIB_10G
|
|
|
|
config PHY_AQUANTIA_UPLOAD_FW
|
|
bool "Aquantia firmware loading support"
|
|
depends on PHY_AQUANTIA
|
|
help
|
|
Aquantia PHYs use firmware which can be either loaded automatically
|
|
from storage directly attached to the phy or loaded by the boot loader
|
|
via MDIO commands. The firmware is loaded from a file, specified by
|
|
the PHY_AQUANTIA_FW_PART and PHY_AQUANTIA_FW_NAME options.
|
|
|
|
config PHY_AQUANTIA_FW_PART
|
|
string "Aquantia firmware partition"
|
|
depends on PHY_AQUANTIA_UPLOAD_FW
|
|
help
|
|
Partition containing the firmware file.
|
|
|
|
config PHY_AQUANTIA_FW_NAME
|
|
string "Aquantia firmware filename"
|
|
depends on PHY_AQUANTIA_UPLOAD_FW
|
|
help
|
|
Firmware filename.
|
|
|
|
config PHY_ATHEROS
|
|
bool "Atheros Ethernet PHYs support"
|
|
|
|
config PHY_BROADCOM
|
|
bool "Broadcom Ethernet PHYs support"
|
|
|
|
config PHY_CORTINA
|
|
bool "Cortina Ethernet PHYs support"
|
|
|
|
config SYS_CORTINA_NO_FW_UPLOAD
|
|
bool "Cortina firmware loading support"
|
|
depends on PHY_CORTINA
|
|
help
|
|
Cortina phy has provision to store phy firmware in attached dedicated
|
|
EEPROM. And boards designed with such EEPROM does not require firmware
|
|
upload.
|
|
|
|
choice
|
|
prompt "Location of the Cortina firmware"
|
|
default SYS_CORTINA_FW_IN_NOR
|
|
depends on PHY_CORTINA
|
|
|
|
config SYS_CORTINA_FW_IN_MMC
|
|
bool "Cortina firmware in MMC"
|
|
|
|
config SYS_CORTINA_FW_IN_NAND
|
|
bool "Cortina firmware in NAND flash"
|
|
|
|
config SYS_CORTINA_FW_IN_NOR
|
|
bool "Cortina firmware in NOR flash"
|
|
|
|
config SYS_CORTINA_FW_IN_REMOTE
|
|
bool "Cortina firmware in remote device"
|
|
|
|
config SYS_CORTINA_FW_IN_SPIFLASH
|
|
bool "Cortina firmware in SPI flash"
|
|
|
|
endchoice
|
|
|
|
config CORTINA_FW_ADDR
|
|
hex "Cortina Firmware Address"
|
|
depends on PHY_CORTINA && !SYS_CORTINA_NO_FW_UPLOAD
|
|
default 0x0
|
|
|
|
config CORTINA_FW_LENGTH
|
|
hex "Cortina Firmware Length"
|
|
depends on PHY_CORTINA && !SYS_CORTINA_NO_FW_UPLOAD
|
|
default 0x40000
|
|
|
|
config PHY_CORTINA_ACCESS
|
|
bool "Cortina Access Ethernet PHYs support"
|
|
default y
|
|
depends on CORTINA_NI_ENET
|
|
help
|
|
Cortina Access Ethernet PHYs init process
|
|
|
|
config PHY_DAVICOM
|
|
bool "Davicom Ethernet PHYs support"
|
|
|
|
config PHY_ET1011C
|
|
bool "LSI TruePHY ET1011C support"
|
|
|
|
config PHY_LXT
|
|
bool "LXT971 Ethernet PHY support"
|
|
|
|
config PHY_MARVELL
|
|
bool "Marvell Ethernet PHYs support"
|
|
|
|
config PHY_MESON_GXL
|
|
bool "Amlogic Meson GXL Internal PHY support"
|
|
|
|
config PHY_MICREL
|
|
bool "Micrel Ethernet PHYs support"
|
|
help
|
|
Enable support for the GbE PHYs manufactured by Micrel (now
|
|
a part of Microchip). This includes drivers for the KSZ804, KSZ8031,
|
|
KSZ8051, KSZ8081, KSZ8895, KSZ886x and KSZ8721 (if "Micrel KSZ8xxx
|
|
family support" is selected) and the KSZ9021 and KSZ9031 (if "Micrel
|
|
KSZ90x1 family support" is selected).
|
|
|
|
if PHY_MICREL
|
|
|
|
config PHY_MICREL_KSZ9021
|
|
bool
|
|
select PHY_MICREL_KSZ90X1
|
|
|
|
config PHY_MICREL_KSZ9031
|
|
bool
|
|
select PHY_MICREL_KSZ90X1
|
|
|
|
config PHY_MICREL_KSZ90X1
|
|
bool "Micrel KSZ90x1 family support"
|
|
select PHY_GIGE
|
|
help
|
|
Enable support for the Micrel KSZ9021 and KSZ9031 GbE PHYs. If
|
|
enabled, the extended register read/write for KSZ90x1 PHYs
|
|
is supported through the 'mdio' command and any RGMII signal
|
|
delays configured in the device tree will be applied to the
|
|
PHY during initialization.
|
|
|
|
config PHY_MICREL_KSZ8XXX
|
|
bool "Micrel KSZ8xxx family support"
|
|
help
|
|
Enable support for the 8000 series 10/100 PHYs manufactured by Micrel
|
|
(now a part of Microchip). This includes drivers for the KSZ804,
|
|
KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, and KSZ8721.
|
|
|
|
endif # PHY_MICREL
|
|
|
|
config PHY_MSCC
|
|
bool "Microsemi Corp Ethernet PHYs support"
|
|
|
|
config PHY_NATSEMI
|
|
bool "National Semiconductor Ethernet PHYs support"
|
|
|
|
config PHY_NXP_C45_TJA11XX
|
|
tristate "NXP C45 TJA11XX PHYs"
|
|
help
|
|
Enable support for NXP C45 TJA11XX PHYs.
|
|
Currently supports only the TJA1103 PHY.
|
|
|
|
config PHY_NXP_TJA11XX
|
|
bool "NXP TJA11XX Ethernet PHYs support"
|
|
help
|
|
Currently supports the NXP TJA1100 and TJA1101 PHY.
|
|
|
|
config PHY_REALTEK
|
|
bool "Realtek Ethernet PHYs support"
|
|
|
|
config RTL8211X_PHY_FORCE_MASTER
|
|
bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
|
|
depends on PHY_REALTEK
|
|
help
|
|
Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
|
|
This can work around link stability and data corruption issues on gigabit
|
|
links which can occur in slave mode on certain PHYs, e.g. on the
|
|
RTL8211C(L).
|
|
|
|
Please note that two directly connected devices (i.e. via crossover cable)
|
|
will not be able to establish a link between each other if they both force
|
|
master mode. Multiple devices forcing master mode when connected by a
|
|
network switch do not pose a problem as the switch configures its affected
|
|
ports into slave mode.
|
|
|
|
This option only affects gigabit links. If you must establish a direct
|
|
connection between two devices which both force master mode, try forcing
|
|
the link speed to 100MBit/s.
|
|
|
|
If unsure, say N.
|
|
|
|
config RTL8211F_PHY_FORCE_EEE_RXC_ON
|
|
bool "Ethernet PHY RTL8211F: do not stop receiving the xMII clock during LPI"
|
|
depends on PHY_REALTEK
|
|
help
|
|
The IEEE 802.3az-2010 (EEE) standard provides a protocol to coordinate
|
|
transitions to/from a lower power consumption level (Low Power Idle
|
|
mode) based on link utilization. When no packets are being
|
|
transmitted, the system goes to Low Power Idle mode to save power.
|
|
|
|
Under particular circumstances this setting can cause issues where
|
|
the PHY is unable to transmit or receive any packet when in LPI mode.
|
|
The problem is caused when the PHY is configured to stop receiving
|
|
the xMII clock while it is signaling LPI. For some PHYs the bit
|
|
configuring this behavior is set by the Linux kernel, causing the
|
|
issue in U-Boot on reboot if the PHY retains the register value.
|
|
|
|
Default n, which means that the PHY state is not changed. To work
|
|
around the issues, change this setting to y.
|
|
|
|
config RTL8201F_PHY_S700_RMII_TIMINGS
|
|
bool "Ethernet PHY RTL8201F: adjust RMII Tx Interface timings"
|
|
depends on PHY_REALTEK
|
|
help
|
|
This provides an option to configure specific timing requirements (needed
|
|
for proper PHY operations) for the PHY module present on ACTION SEMI S700
|
|
based cubieboard7. Exact timing requiremnets seems to be SoC specific
|
|
(and it's undocumented) that comes from vendor code itself.
|
|
|
|
config PHY_SMSC
|
|
bool "Microchip(SMSC) Ethernet PHYs support"
|
|
|
|
config PHY_TERANETICS
|
|
bool "Teranetics Ethernet PHYs support"
|
|
|
|
config PHY_TI
|
|
bool "Texas Instruments Ethernet PHYs support"
|
|
---help---
|
|
Adds PHY registration support for TI PHYs.
|
|
|
|
config PHY_TI_DP83867
|
|
select PHY_TI
|
|
bool "Texas Instruments Ethernet DP83867 PHY support"
|
|
---help---
|
|
Adds support for the TI DP83867 1Gbit PHY.
|
|
|
|
config PHY_TI_DP83869
|
|
select PHY_TI
|
|
bool "Texas Instruments Ethernet DP83869 PHY support"
|
|
---help---
|
|
Adds support for the TI DP83869 1Gbit PHY.
|
|
|
|
config PHY_TI_GENERIC
|
|
select PHY_TI
|
|
bool "Texas Instruments Generic Ethernet PHYs support"
|
|
---help---
|
|
Adds support for Generic TI PHYs that don't need special handling but
|
|
the PHY name is associated with a PHY ID.
|
|
|
|
config PHY_VITESSE
|
|
bool "Vitesse Ethernet PHYs support"
|
|
|
|
config PHY_XILINX
|
|
bool "Xilinx Ethernet PHYs support"
|
|
|
|
config PHY_XILINX_GMII2RGMII
|
|
bool "Xilinx GMII to RGMII Ethernet PHYs support"
|
|
help
|
|
This adds support for Xilinx GMII to RGMII IP core. This IP acts
|
|
as bridge between MAC connected over GMII and external phy that
|
|
is connected over RGMII interface.
|
|
|
|
config PHY_XWAY
|
|
bool "Intel XWAY PHY support"
|
|
help
|
|
This adds support for the Intel XWAY (formerly Lantiq) Gbe PHYs.
|
|
|
|
config PHY_ETHERNET_ID
|
|
bool "Read ethernet PHY id"
|
|
depends on DM_GPIO
|
|
default y if ZYNQ_GEM
|
|
help
|
|
Enable this config to read ethernet phy id from the phy node of DT
|
|
and create a phy device using id.
|
|
|
|
config PHY_FIXED
|
|
bool "Fixed-Link PHY"
|
|
help
|
|
Fixed PHY is used for having a 'fixed-link' to another MAC with a direct
|
|
connection (MII, RGMII, ...).
|
|
There is nothing like autoneogation and so
|
|
on, the link is always up with fixed speed and fixed duplex-setting.
|
|
More information: doc/device-tree-bindings/net/fixed-link.txt
|
|
|
|
config PHY_NCSI
|
|
bool "NC-SI based PHY"
|
|
|
|
endif #PHYLIB
|
|
|
|
config FSL_MEMAC
|
|
bool "NXP mEMAC PHY support"
|
|
|
|
config SYS_MEMAC_LITTLE_ENDIAN
|
|
bool "mEMAC is access in little endian mode"
|
|
depends on FSL_MEMAC || FSL_LS_MDIO
|
|
|
|
config PHY_RESET_DELAY
|
|
int "Extra delay after reset before MII register access"
|
|
default 0
|
|
help
|
|
Some PHYs need extra delay after reset before any MII register access
|
|
is possible. For such PHY, set this option to the usec delay
|
|
required.
|