u-boot/board/davinci/da8xxevm/da830evm.c
Prakash PM b9f34ce94f da830 evm: Fix checkpatch error on 'pinmux' macro
Existing code returns checkpatch error on pinmux macro definition for
not enclosing the definition in parenthesis. The error can be observed in
the patch generated from commit id bdc9c6c7f7.
So macro implementation is modified to fix the error.

Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-07-15 16:08:35 -04:00

227 lines
6 KiB
C

/*
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
*
* Base on code from TI. Original Notices follow:
*
* (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
*
* Modified for DA8xx EVM.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Parts are shamelessly stolen from various TI sources, original copyright
* follows:
* -----------------------------------------------------------------
*
* Copyright (C) 2004 Texas Instruments.
*
* ----------------------------------------------------------------------------
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emif_defs.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include "../common/misc.h"
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
#define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
/* SPI0 pin muxer settings */
static const struct pinmux_config spi0_pins[] = {
{ pinmux(7), 1, 3 },
{ pinmux(7), 1, 4 },
{ pinmux(7), 1, 5 },
{ pinmux(7), 1, 6 },
{ pinmux(7), 1, 7 }
};
/* EMIF-A bus pins for 8-bit NAND support on CS3 */
static const struct pinmux_config emifa_nand_pins[] = {
{ pinmux(13), 1, 6 },
{ pinmux(13), 1, 7 },
{ pinmux(14), 1, 0 },
{ pinmux(14), 1, 1 },
{ pinmux(14), 1, 2 },
{ pinmux(14), 1, 3 },
{ pinmux(14), 1, 4 },
{ pinmux(14), 1, 5 },
{ pinmux(15), 1, 7 },
{ pinmux(16), 1, 0 },
{ pinmux(18), 1, 1 },
{ pinmux(18), 1, 4 },
{ pinmux(18), 1, 5 },
};
/* EMAC PHY interface pins */
static const struct pinmux_config emac_pins[] = {
{ pinmux(9), 0, 5 },
{ pinmux(10), 2, 1 },
{ pinmux(10), 2, 2 },
{ pinmux(10), 2, 3 },
{ pinmux(10), 2, 4 },
{ pinmux(10), 2, 5 },
{ pinmux(10), 2, 6 },
{ pinmux(10), 2, 7 },
{ pinmux(11), 2, 0 },
{ pinmux(11), 2, 1 },
};
/* UART pin muxer settings */
static const struct pinmux_config uart_pins[] = {
{ pinmux(8), 2, 7 },
{ pinmux(9), 2, 0 }
};
/* I2C pin muxer settings */
static const struct pinmux_config i2c_pins[] = {
{ pinmux(8), 2, 3 },
{ pinmux(8), 2, 4 }
};
/* USB0_DRVVBUS pin muxer settings */
static const struct pinmux_config usb_pins[] = {
{ pinmux(9), 1, 1 }
};
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
PINMUX_ITEM(spi0_pins),
#endif
PINMUX_ITEM(uart_pins),
PINMUX_ITEM(i2c_pins),
#ifdef CONFIG_USB_DA8XX
PINMUX_ITEM(usb_pins),
#endif
#ifdef CONFIG_USE_NAND
PINMUX_ITEM(emifa_nand_pins),
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
PINMUX_ITEM(emac_pins),
#endif
};
static const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_SPI0 }, /* Serial Flash */
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
};
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
#ifdef CONFIG_NAND_DAVINCI
/* EMIFA 100MHz clock select */
writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2,
&davinci_syscfg_regs->cfgchip3);
/* NAND CS setup */
writel((DAVINCI_ABCR_WSETUP(0) |
DAVINCI_ABCR_WSTROBE(2) |
DAVINCI_ABCR_WHOLD(0) |
DAVINCI_ABCR_RSETUP(0) |
DAVINCI_ABCR_RSTROBE(2) |
DAVINCI_ABCR_RHOLD(0) |
DAVINCI_ABCR_TA(2) |
DAVINCI_ABCR_ASIZE_8BIT),
&davinci_emif_regs->ab2cr);
#endif
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
/*
* Power on required peripherals
* ARM does not have access by default to PSC0 and PSC1
* assuming here that the DSP bootloader has set the IOPU
* such that PSC access is available to ARM
*/
if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
return 1;
/* setup the SUSPSRC for ARM to control emulation suspend */
writel(readl(&davinci_syscfg_regs->suspsrc) &
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
DAVINCI_SYSCFG_SUSPSRC_UART2),
&davinci_syscfg_regs->suspsrc);
/* configure pinmux settings */
if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
return 1;
/* enable the console UART */
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
DAVINCI_UART_PWREMU_MGMT_UTRST),
&davinci_uart2_ctrl_regs->pwremu_mgmt);
return(0);
}
#if defined(CONFIG_DRIVER_TI_EMAC)
#define PHY_SW_I2C_ADDR 0x5f /* Address of PHY on i2c bus */
/*
* Initializes on-board ethernet controllers.
*/
int board_eth_init(bd_t *bis)
{
u_int8_t mac_addr[6];
u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(mac_addr))
/* set address env if not already set */
dv_configure_mac_address(mac_addr);
/* read the address back from env */
if (!eth_getenv_enetaddr("ethaddr", mac_addr))
return -1;
/* provide the resulting addr to the driver */
davinci_eth_set_mac_addr(mac_addr);
/* enable the Ethernet switch in the 3 port PHY */
if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
switch_start_cmd, sizeof(switch_start_cmd))) {
printf("Ethernet switch start failed!\n");
return -1;
}
/* finally, initialise the driver */
if (!davinci_emac_initialize()) {
printf("Error: Ethernet init failed!\n");
return -1;
}
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */