u-boot/arch/mips/mach-ath79/ar933x/lowlevel_init.S
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

279 lines
6.6 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
* Based on Atheros LSDK/QSDK and u-boot_mod project
*/
#include <config.h>
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <mach/ar71xx_regs.h>
#define SET_BIT(val, bit) ((val) | (1 << (bit)))
#define SET_PLL_PD(val) SET_BIT(val, 30)
#define AHB_DIV_TO_4(val) SET_BIT(SET_BIT(val, 15), 16)
#define PLL_BYPASS(val) SET_BIT(val, 2)
#define MK_PLL_CONF(divint, refdiv, range, outdiv) \
(((0x3F & divint) << 10) | \
((0x1F & refdiv) << 16) | \
((0x1 & range) << 21) | \
((0x7 & outdiv) << 23) )
#define MK_CLK_CNTL(cpudiv, ddrdiv, ahbdiv) \
(((0x3 & (cpudiv - 1)) << 5) | \
((0x3 & (ddrdiv - 1)) << 10) | \
((0x3 & (ahbdiv - 1)) << 15) )
/*
* PLL_CPU_CONFIG_VAL
*
* Bit30 is set (CPU_PLLPWD = 1 -> power down control for CPU PLL)
* After PLL configuration we need to clear this bit
*
* Values written into CPU PLL Configuration (CPU_PLL_CONFIG)
*
* bits 10..15 (6bit) DIV_INT (Integer part of the DIV to CPU PLL)
* => 32 (0x20) VCOOUT = XTAL * DIV_INT
* bits 16..20 (5bit) REFDIV (Reference clock divider)
* => 1 (0x1) [Must start at values 1]
* bits 21 (1bit) RANGE (VCO frequency range of the CPU PLL)
* => 0 (0x0) [Doesn't impact clock values]
* bits 23..25 (3bit) OUTDIV (Ratio between VCO and PLL output)
* => 1 (0x1) [0 is illegal!]
* PLLOUT = VCOOUT * (1/2^OUTDIV)
*/
/* DIV_INT=32 (25MHz*32/2=400MHz), REFDIV=1, RANGE=0, OUTDIV=1 */
#define PLL_CPU_CONFIG_VAL_40M MK_PLL_CONF(20, 1, 0, 1)
/* DIV_INT=20 (40MHz*20/2=400MHz), REFDIV=1, RANGE=0, OUTDIV=1 */
#define PLL_CPU_CONFIG_VAL_25M MK_PLL_CONF(32, 1, 0, 1)
/*
* PLL_CLK_CONTROL_VAL
*
* In PLL_CLK_CONTROL_VAL bit 2 is set (BYPASS = 1 -> bypass PLL)
* After PLL configuration we need to clear this bit
*
* Values written into CPU Clock Control Register CLOCK_CONTROL
*
* bits 2 (1bit) BYPASS (Bypass PLL. This defaults to 1 for test.
* Software must enable the CPU PLL for normal and
* then set this bit to 0)
* bits 5..6 (2bit) CPU_POST_DIV => 0 (DEFAULT, Ratio = 1)
* CPU_CLK = PLLOUT / CPU_POST_DIV
* bits 10..11 (2bit) DDR_POST_DIV => 0 (DEFAULT, Ratio = 1)
* DDR_CLK = PLLOUT / DDR_POST_DIV
* bits 15..16 (2bit) AHB_POST_DIV => 1 (DEFAULT, Ratio = 2)
* AHB_CLK = PLLOUT / AHB_POST_DIV
*
*/
#define PLL_CLK_CONTROL_VAL MK_CLK_CNTL(1, 1, 2)
.text
.set noreorder
LEAF(lowlevel_init)
/* These three WLAN_RESET will avoid original issue */
li t3, 0x03
1:
li t0, CKSEG1ADDR(AR71XX_RESET_BASE)
lw t1, AR933X_RESET_REG_RESET_MODULE(t0)
ori t1, t1, 0x0800
sw t1, AR933X_RESET_REG_RESET_MODULE(t0)
nop
lw t1, AR933X_RESET_REG_RESET_MODULE(t0)
li t2, 0xfffff7ff
and t1, t1, t2
sw t1, AR933X_RESET_REG_RESET_MODULE(t0)
nop
addi t3, t3, -1
bnez t3, 1b
nop
li t2, 0x20
2:
beqz t2, 1b
nop
addi t2, t2, -1
lw t5, AR933X_RESET_REG_BOOTSTRAP(t0)
andi t1, t5, 0x10
bnez t1, 2b
nop
li t1, 0x02110E
sw t1, AR933X_RESET_REG_BOOTSTRAP(t0)
nop
/* RTC Force Wake */
li t0, CKSEG1ADDR(AR933X_RTC_BASE)
li t1, 0x03
sw t1, AR933X_RTC_REG_FORCE_WAKE(t0)
nop
nop
/* RTC Reset */
li t1, 0x00
sw t1, AR933X_RTC_REG_RESET(t0)
nop
nop
li t1, 0x01
sw t1, AR933X_RTC_REG_RESET(t0)
nop
nop
/* Wait for RTC in on state */
1:
lw t1, AR933X_RTC_REG_STATUS(t0)
andi t1, t1, 0x02
beqz t1, 1b
nop
/* Program ki/kd */
li t0, CKSEG1ADDR(AR933X_SRIF_BASE)
andi t1, t5, 0x01 # t5 BOOT_STRAP
bnez t1, 1f
nop
li t1, 0x19e82f01
b 2f
nop
1:
li t1, 0x18e82f01
2:
sw t1, AR933X_SRIF_DDR_DPLL2_REG(t0)
/* Program phase shift */
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
li t2, 0xc07fffff
and t1, t1, t2
li t2, 0x800000
or t1, t1, t2
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
nop
/* in some cases, the SoC doesn't start with higher clock on AHB */
li t0, CKSEG1ADDR(AR71XX_PLL_BASE)
li t1, AHB_DIV_TO_4(PLL_BYPASS(PLL_CLK_CONTROL_VAL))
sw t1, AR933X_PLL_CLK_CTRL_REG(t0)
nop
/* Set SETTLE_TIME in CPU PLL */
andi t1, t5, 0x01 # t5 BOOT_STRAP
bnez t1, 1f
nop
li t1, 0x0352
b 2f
nop
1:
li t1, 0x0550
2:
sw t1, AR71XX_PLL_REG_SEC_CONFIG(t0)
nop
/* Set nint, frac, refdiv, outdiv, range according to xtal */
0:
andi t1, t5, 0x01 # t5 BOOT_STRAP
bnez t1, 1f
nop
li t1, SET_PLL_PD(PLL_CPU_CONFIG_VAL_25M)
b 2f
nop
1:
li t1, SET_PLL_PD(PLL_CPU_CONFIG_VAL_40M)
2:
sw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
nop
1:
lw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
li t2, 0x80000000
and t1, t1, t2
bnez t1, 1b
nop
/* Put frac bit19:10 configuration */
li t1, 0x1003E8
sw t1, AR933X_PLL_DITHER_FRAC_REG(t0)
nop
/* Clear PLL power down bit in CPU PLL configuration */
andi t1, t5, 0x01 # t5 BOOT_STRAP
bnez t1, 1f
nop
li t1, PLL_CPU_CONFIG_VAL_25M
b 2f
nop
1:
li t1, PLL_CPU_CONFIG_VAL_40M
2:
sw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
nop
/* Wait for PLL update -> bit 31 in CPU_PLL_CONFIG should be 0 */
1:
lw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
li t2, 0x80000000
and t1, t1, t2
bnez t1, 1b
nop
/* Confirm DDR PLL lock */
li t3, 100
li t4, 0
2:
addi t4, t4, 1
bgt t4, t3, 0b
nop
li t3, 5
3:
/* Clear do_meas */
li t0, CKSEG1ADDR(AR933X_SRIF_BASE)
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
li t2, 0xBFFFFFFF
and t1, t1, t2
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
nop
li t2, 10
1:
subu t2, t2, 1
bnez t2, 1b
nop
/* Set do_meas */
li t2, 0x40000000
or t1, t1, t2
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
nop
/* Check meas_done */
1:
lw t1, AR933X_SRIF_DDR_DPLL4_REG(t0)
andi t1, t1, 0x8
beqz t1, 1b
nop
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
li t2, 0x007FFFF8
and t1, t1, t2
srl t1, t1, 3
li t2, 0x4000
bgt t1, t2, 2b
nop
addi t3, t3, -1
bnez t3, 3b
nop
/* clear PLL bypass (bit 2) in CPU CLOCK CONTROL register */
li t0, CKSEG1ADDR(AR71XX_PLL_BASE)
li t1, PLL_CLK_CONTROL_VAL
sw t1, AR933X_PLL_CLK_CTRL_REG(t0)
nop
nop
jr ra
nop
END(lowlevel_init)