u-boot/include/configs/bfin_adi_common.h
Mike Frysinger 7c7503ee6c Blackfin: enable LZMA for all ADI boards
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:12 -04:00

225 lines
5 KiB
C

/*
* U-Boot - Common settings for Analog Devices boards
*/
#ifndef __CONFIG_BFIN_ADI_COMMON_H__
#define __CONFIG_BFIN_ADI_COMMON_H__
/*
* Command Settings
*/
#ifndef _CONFIG_CMD_DEFAULT_H
# include <config_cmd_default.h>
# if ADI_CMDS_NETWORK
# define CONFIG_CMD_DHCP
# define CONFIG_CMD_PING
# ifdef CONFIG_BFIN_MAC
# define CONFIG_CMD_MII
# endif
# else
# undef CONFIG_CMD_BOOTD
# undef CONFIG_CMD_NET
# undef CONFIG_CMD_NFS
# endif
# ifdef CONFIG_LIBATA
# define CONFIG_CMD_FAT
# define CONFIG_CMD_SATA
# define CONFIG_DOS_PARTITION
# endif
# ifdef CONFIG_MMC
# define CONFIG_CMD_FAT
# define CONFIG_CMD_MMC
# define CONFIG_DOS_PARTITION
# endif
# ifdef CONFIG_USB
# define CONFIG_CMD_EXT2
# define CONFIG_CMD_FAT
# define CONFIG_CMD_USB
# define CONFIG_CMD_USB_STORAGE
# define CONFIG_DOS_PARTITION
# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
# endif
# ifdef CONFIG_RTC_BFIN
# define CONFIG_CMD_DATE
# endif
# ifdef CONFIG_SPI
# define CONFIG_CMD_EEPROM
# endif
# if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
# define CONFIG_CMD_SPI
# endif
# ifdef CONFIG_SPI_FLASH
# define CONFIG_CMD_SF
# endif
# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
# define CONFIG_CMD_I2C
# endif
# ifdef CONFIG_SYS_NO_FLASH
# undef CONFIG_CMD_FLASH
# undef CONFIG_CMD_IMLS
# else
# define CONFIG_CMD_JFFS2
# endif
# define CONFIG_CMD_BOOTLDR
# define CONFIG_CMD_CACHE
# define CONFIG_CMD_CPLBINFO
# define CONFIG_CMD_ELF
# define CONFIG_ELF_SIMPLE_LOAD
# define CONFIG_CMD_REGINFO
# define CONFIG_CMD_STRINGS
# if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
# define CONFIG_CMD_OTP
# define CONFIG_CMD_SPIBOOTLDR
# endif
#endif
/*
* Console Settings
*/
#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_LOADS_ECHO 1
#define CONFIG_JTAG_CONSOLE
#ifndef CONFIG_BAUDRATE
# define CONFIG_BAUDRATE 57600
#endif
/*
* Debug Settings
*/
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_DEBUG_DUMP 1
#define CONFIG_KALLSYMS 1
#define CONFIG_PANIC_HANG 1
/*
* Env Settings
*/
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
# define CONFIG_BOOTDELAY -1
#else
# define CONFIG_BOOTDELAY 5
#endif
#ifndef CONFIG_BOOTCOMMAND
# define CONFIG_BOOTCOMMAND "run ramboot"
#endif
#ifdef CONFIG_VIDEO
# define CONFIG_BOOTARGS_VIDEO "console=tty0 "
#else
# define CONFIG_BOOTARGS_VIDEO ""
#endif
#ifndef CONFIG_BOOTARGS_ROOT
# define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
#endif
#define CONFIG_BOOTARGS \
"root=" CONFIG_BOOTARGS_ROOT " " \
"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
"earlyprintk=" \
"serial," \
"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
MK_STR(CONFIG_BAUDRATE) " " \
CONFIG_BOOTARGS_VIDEO \
"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
#if defined(CONFIG_CMD_NAND)
# define NAND_ENV_SETTINGS \
"nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
"nandboot=" \
"nand read $(loadaddr) 0x20000 0x100000;" \
"run nandargs;" \
"bootm" \
"\0"
#else
# define NAND_ENV_SETTINGS
#endif
#if defined(CONFIG_CMD_NET)
# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
# define UBOOT_ENV_FILE "u-boot.bin"
# else
# define UBOOT_ENV_FILE "u-boot.ldr"
# endif
# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
# ifdef CONFIG_SPI
# define UBOOT_ENV_UPDATE \
"eeprom write $(loadaddr) 0x0 $(filesize)"
# else
# define UBOOT_ENV_UPDATE \
"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
"sf erase 0 0x40000;" \
"sf write $(loadaddr) 0 $(filesize)"
# endif
# elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
# define UBOOT_ENV_UPDATE \
"nand unlock 0 0x40000;" \
"nand erase 0 0x40000;" \
"nand write $(loadaddr) 0 0x40000"
# else
# define UBOOT_ENV_UPDATE \
"protect off 0x20000000 0x2003FFFF;" \
"erase 0x20000000 0x2003FFFF;" \
"cp.b $(loadaddr) 0x20000000 $(filesize)"
# endif
# define NETWORK_ENV_SETTINGS \
"ubootfile=" UBOOT_ENV_FILE "\0" \
"update=" \
"tftp $(loadaddr) $(ubootfile);" \
UBOOT_ENV_UPDATE \
"\0" \
"addip=set bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
"$(hostname):eth0:off" \
"\0" \
\
"ramfile=uImage\0" \
"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
"ramboot=" \
"tftp $(loadaddr) $(ramfile);" \
"run ramargs;" \
"run addip;" \
"bootm" \
"\0" \
\
"nfsfile=vmImage\0" \
"nfsargs=set bootargs " \
"root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
"\0" \
"nfsboot=" \
"tftp $(loadaddr) $(nfsfile);" \
"run nfsargs;" \
"run addip;" \
"bootm" \
"\0"
#else
# define NETWORK_ENV_SETTINGS
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
NAND_ENV_SETTINGS \
NETWORK_ENV_SETTINGS \
"flashboot=bootm 0x20100000\0"
/*
* Network Settings
*/
#ifdef CONFIG_CMD_NET
# define CONFIG_IPADDR 192.168.0.15
# define CONFIG_NETMASK 255.255.255.0
# define CONFIG_GATEWAYIP 192.168.0.1
# define CONFIG_SERVERIP 192.168.0.2
# define CONFIG_ROOTPATH /romfs
# ifdef CONFIG_CMD_DHCP
# ifndef CONFIG_SYS_AUTOLOAD
# define CONFIG_SYS_AUTOLOAD "no"
# endif
# endif
# define CONFIG_NET_RETRY_COUNT 20
#endif
/*
* Misc Settings
*/
#define CONFIG_LZMA
#endif