Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-27 13:33:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/tqc/tqma6/tqma6_wru4.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

345 lines
8.3 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
* Author: Markus Niebel <markus.niebel@tq-group.com>
*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*/
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <common.h>
#include <fsl_esdhc.h>
#include <linux/libfdt.h>
#include <malloc.h>
#include <i2c.h>
#include <micrel.h>
#include <miiphy.h>
#include <mmc.h>
#include <netdev.h>
#include "tqma6_bb.h"
/* UART */
#define UART4_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_PKE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const uart4_pads[] = {
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT17__UART4_CTS_B, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT16__UART4_RTS_B, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT13__UART4_RX_DATA, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT12__UART4_TX_DATA, UART4_PAD_CTRL),
};
static void setup_iomuxc_uart4(void)
{
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
}
/* MMC */
#define USDHC2_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST \
)
#define USDHC2_CLK_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST \
)
static iomux_v3_cfg_t const usdhc2_pads[] = {
NEW_PAD_CTRL(MX6_PAD_SD2_CLK__SD2_CLK, USDHC2_CLK_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_CMD__SD2_CMD, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT0__SD2_DATA0, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT1__SD2_DATA1, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT2__SD2_DATA2, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT3__SD2_DATA3, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_4__GPIO1_IO04, USDHC2_PAD_CTRL), /* CD */
NEW_PAD_CTRL(MX6_PAD_GPIO_2__SD2_WP, USDHC2_PAD_CTRL), /* WP */
};
#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
#define USDHC2_WP_GPIO IMX_GPIO_NR(1, 2)
static struct fsl_esdhc_cfg usdhc2_cfg = {
.esdhc_base = USDHC2_BASE_ADDR,
.max_bus_width = 4,
};
int tqma6_bb_board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC2_BASE_ADDR)
ret = !gpio_get_value(USDHC2_CD_GPIO);
return ret;
}
int tqma6_bb_board_mmc_getwp(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC2_BASE_ADDR)
ret = gpio_get_value(USDHC2_WP_GPIO);
return ret;
}
int tqma6_bb_board_mmc_init(bd_t *bis)
{
int ret;
imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
ret = gpio_request(USDHC2_CD_GPIO, "mmc-cd");
if (!ret)
gpio_direction_input(USDHC2_CD_GPIO);
ret = gpio_request(USDHC2_WP_GPIO, "mmc-wp");
if (!ret)
gpio_direction_input(USDHC2_WP_GPIO);
usdhc2_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
if(fsl_esdhc_initialize(bis, &usdhc2_cfg))
puts("WARNING: failed to initialize SD\n");
return 0;
}
/* Ethernet */
#define ENET_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_PKE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const enet_pads[] = {
NEW_PAD_CTRL(MX6_PAD_ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_16__ENET_REF_CLK, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RXD0__ENET_RX_DATA0, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RXD1__ENET_RX_DATA1, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_CRS_DV__ENET_RX_EN, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RX_ER__ENET_RX_ER, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TXD0__ENET_TX_DATA0, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TXD1__ENET_TX_DATA1, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TX_EN__ENET_TX_EN, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_19__ENET_TX_ER, ENET_PAD_CTRL),
/* ENET1 reset */
NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, ENET_PAD_CTRL),
/* ENET1 interrupt */
NEW_PAD_CTRL(MX6_PAD_GPIO_9__GPIO1_IO09, ENET_PAD_CTRL),
};
#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 8)
static void setup_iomuxc_enet(void)
{
int ret;
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
/* Reset LAN8720 PHY */
ret = gpio_request(ENET_PHY_RESET_GPIO, "phy-reset");
if (!ret)
gpio_direction_output(ENET_PHY_RESET_GPIO , 0);
udelay(25000);
gpio_set_value(ENET_PHY_RESET_GPIO, 1);
}
int board_eth_init(bd_t *bis)
{
return cpu_eth_init(bis);
}
/* GPIO */
#define GPIO_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
#define GPIO_OD_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_ODE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const gpio_pads[] = {
/* USB_H_PWR */
NEW_PAD_CTRL(MX6_PAD_GPIO_0__GPIO1_IO00, GPIO_PAD_CTRL),
/* USB_OTG_PWR */
NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, GPIO_PAD_CTRL),
/* PCIE_RST */
NEW_PAD_CTRL(MX6_PAD_NANDF_CLE__GPIO6_IO07, GPIO_OD_PAD_CTRL),
/* UART1_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT14__GPIO5_IO08, GPIO_PAD_CTRL),
/* UART2_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT16__GPIO5_IO10, GPIO_PAD_CTRL),
/* UART3_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT18__GPIO5_IO12, GPIO_PAD_CTRL),
};
#define GPIO_USB_H_PWR IMX_GPIO_NR(1, 0)
#define GPIO_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define GPIO_PCIE_RST IMX_GPIO_NR(6, 7)
#define GPIO_UART1_PWRON IMX_GPIO_NR(5, 8)
#define GPIO_UART2_PWRON IMX_GPIO_NR(5, 10)
#define GPIO_UART3_PWRON IMX_GPIO_NR(5, 12)
static void gpio_init(void)
{
int ret;
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
ret = gpio_request(GPIO_USB_H_PWR, "usb-h-pwr");
if (!ret)
gpio_direction_output(GPIO_USB_H_PWR, 1);
ret = gpio_request(GPIO_USB_OTG_PWR, "usb-otg-pwr");
if (!ret)
gpio_direction_output(GPIO_USB_OTG_PWR, 1);
ret = gpio_request(GPIO_PCIE_RST, "pcie-reset");
if (!ret)
gpio_direction_output(GPIO_PCIE_RST, 1);
ret = gpio_request(GPIO_UART1_PWRON, "uart1-pwr");
if (!ret)
gpio_direction_output(GPIO_UART1_PWRON, 0);
ret = gpio_request(GPIO_UART2_PWRON, "uart2-pwr");
if (!ret)
gpio_direction_output(GPIO_UART2_PWRON, 0);
ret = gpio_request(GPIO_UART3_PWRON, "uart3-pwr");
if (!ret)
gpio_direction_output(GPIO_UART3_PWRON, 0);
}
void tqma6_iomuxc_spi(void)
{
/* No SPI on this baseboard */
}
int tqma6_bb_board_early_init_f(void)
{
setup_iomuxc_uart4();
return 0;
}
int tqma6_bb_board_init(void)
{
setup_iomuxc_enet();
gpio_init();
/* Turn the UART-couplers on one-after-another */
gpio_set_value(GPIO_UART1_PWRON, 1);
mdelay(10);
gpio_set_value(GPIO_UART2_PWRON, 1);
mdelay(10);
gpio_set_value(GPIO_UART3_PWRON, 1);
return 0;
}
int tqma6_bb_board_late_init(void)
{
return 0;
}
const char *tqma6_bb_get_boardname(void)
{
return "WRU-IV";
}
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
/* 8 bit bus width */
{"emmc", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{ NULL, 0 },
};
int misc_init_r(void)
{
add_board_boot_modes(board_boot_modes);
return 0;
}
#define WRU4_USB_H1_PWR IMX_GPIO_NR(1, 0)
#define WRU4_USB_OTG_PWR IMX_GPIO_NR(3, 22)
int board_ehci_hcd_init(int port)
{
int ret;
ret = gpio_request(WRU4_USB_H1_PWR, "usb-h1-pwr");
if (!ret)
gpio_direction_output(WRU4_USB_H1_PWR, 1);
ret = gpio_request(WRU4_USB_OTG_PWR, "usb-OTG-pwr");
if (!ret)
gpio_direction_output(WRU4_USB_OTG_PWR, 1);
return 0;
}
int board_ehci_power(int port, int on)
{
if (port)
gpio_set_value(WRU4_USB_OTG_PWR, on);
else
gpio_set_value(WRU4_USB_H1_PWR, on);
return 0;
}
/*
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void tqma6_bb_ft_board_setup(void *blob, bd_t *bd)
{
/* TBD */
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
Reference in a new issue View git blame Copy permalink