mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
256 lines
6.2 KiB
C
256 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board.c
|
|
*
|
|
* Board functions for Phytec phyCORE-AM335x (pcm051) based boards
|
|
*
|
|
* Copyright (C) 2013 Lemonage Software GmbH
|
|
* Author Lars Poeschel <poeschel@lemonage.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
#include "board.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* MII mode defines */
|
|
#define RMII_RGMII2_MODE_ENABLE 0x49
|
|
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
/* DDR RAM defines */
|
|
#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */
|
|
|
|
#define OSC (V_OSCK/1000000)
|
|
const struct dpll_params dpll_ddr = {
|
|
DDR_CLK_MHZ, OSC-1, 1, -1, -1, -1, -1};
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr;
|
|
}
|
|
|
|
#ifdef CONFIG_REV1
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = MT41J256M8HX15E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41J256M8HX15E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41J256M8HX15E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41J256M8HX15E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41J256M8HX15E_IOCTRL_VALUE,
|
|
};
|
|
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
|
|
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
|
|
.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41J256M8HX15E_RATIO,
|
|
.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41J256M8HX15E_RATIO,
|
|
.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41J256M8HX15E_RATIO,
|
|
.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41J256M8HX15E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41J256M8HX15E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41J256M8HX15E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3,
|
|
.zq_config = MT41J256M8HX15E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY |
|
|
PHY_EN_DYN_PWRDN,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data,
|
|
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
|
|
}
|
|
#else
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
};
|
|
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
|
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
|
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
|
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
|
|
PHY_EN_DYN_PWRDN,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data,
|
|
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
|
|
}
|
|
#endif
|
|
|
|
void set_uart_mux_conf(void)
|
|
{
|
|
enable_uart0_pin_mux();
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
/* Initalize the board header */
|
|
enable_i2c0_pin_mux();
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
|
|
enable_board_pin_mux();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Basic board specific setup. Pinmux has been handled already.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
static void cpsw_control(int enabled)
|
|
{
|
|
/* VTP can be added here */
|
|
|
|
return;
|
|
}
|
|
|
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
{
|
|
.slave_reg_ofs = 0x208,
|
|
.sliver_reg_ofs = 0xd80,
|
|
.phy_addr = 0,
|
|
.phy_if = PHY_INTERFACE_MODE_RGMII,
|
|
},
|
|
{
|
|
.slave_reg_ofs = 0x308,
|
|
.sliver_reg_ofs = 0xdc0,
|
|
.phy_addr = 1,
|
|
.phy_if = PHY_INTERFACE_MODE_RGMII,
|
|
},
|
|
};
|
|
|
|
static struct cpsw_platform_data cpsw_data = {
|
|
.mdio_base = CPSW_MDIO_BASE,
|
|
.cpsw_base = CPSW_BASE,
|
|
.mdio_div = 0xff,
|
|
.channels = 8,
|
|
.cpdma_reg_ofs = 0x800,
|
|
.slaves = 1,
|
|
.slave_data = cpsw_slaves,
|
|
.ale_reg_ofs = 0xd00,
|
|
.ale_entries = 1024,
|
|
.host_port_reg_ofs = 0x108,
|
|
.hw_stats_reg_ofs = 0x900,
|
|
.bd_ram_ofs = 0x2000,
|
|
.mac_control = (1 << 5),
|
|
.control = cpsw_control,
|
|
.host_port_num = 0,
|
|
.version = CPSW_CTRL_VERSION_2,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_DRIVER_TI_CPSW) || \
|
|
(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rv, n = 0;
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
uint8_t mac_addr[6];
|
|
uint32_t mac_hi, mac_lo;
|
|
|
|
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
|
printf("<ethaddr> not set. Reading from E-fuse\n");
|
|
/* try reading mac address from efuse */
|
|
mac_lo = readl(&cdev->macid0l);
|
|
mac_hi = readl(&cdev->macid0h);
|
|
mac_addr[0] = mac_hi & 0xFF;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
|
mac_addr[4] = mac_lo & 0xFF;
|
|
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
|
|
|
if (is_valid_ethaddr(mac_addr))
|
|
eth_env_set_enetaddr("ethaddr", mac_addr);
|
|
else
|
|
goto try_usbether;
|
|
}
|
|
|
|
writel(RMII_RGMII2_MODE_ENABLE, &cdev->miisel);
|
|
|
|
rv = cpsw_register(&cpsw_data);
|
|
if (rv < 0)
|
|
printf("Error %d registering CPSW switch\n", rv);
|
|
else
|
|
n += rv;
|
|
try_usbether:
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
|
|
rv = usb_eth_initialize(bis);
|
|
if (rv < 0)
|
|
printf("Error %d registering USB_ETHER\n", rv);
|
|
else
|
|
n += rv;
|
|
#endif
|
|
return n;
|
|
}
|
|
#endif
|