u-boot/drivers/block/ata_piix.c
Jean-Christophe PLAGNIOL-VILLARD 33daf5b785 drivers/block : move block drivers to drivers/block
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00

216 lines
5.5 KiB
C

/*
* Copyright (C) Procsys. All rights reserved.
* Author: Mushtaq Khan <mushtaq_k@procsys.com>
* <mushtaqk_921@yahoo.co.in>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* with the reference to ata_piix driver in kernel 2.4.32
*/
/*
* This file contains SATA controller and SATA drive initialization functions
*/
#include <common.h>
#include <pci.h>
#include <command.h>
#include <config.h>
#include <asm/byteorder.h>
#include <ide.h>
#include <ata.h>
#ifdef CFG_ATA_PIIX /*ata_piix driver */
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
#define DRV_DECL /*For file specific declarations */
#include <sata.h>
#undef DRV_DECL
/*Macros realted to PCI*/
#define PCI_SATA_BUS 0x00
#define PCI_SATA_DEV 0x1f
#define PCI_SATA_FUNC 0x02
#define PCI_SATA_BASE1 0x10
#define PCI_SATA_BASE2 0x14
#define PCI_SATA_BASE3 0x18
#define PCI_SATA_BASE4 0x1c
#define PCI_SATA_BASE5 0x20
#define PCI_PMR 0x90
#define PCI_PI 0x09
#define PCI_PCS 0x92
#define PCI_DMA_CTL 0x48
#define PORT_PRESENT (1<<0)
#define PORT_ENABLED (1<<4)
u32 bdf;
u32 iobase1 = 0; /*Primary cmd block */
u32 iobase2 = 0; /*Primary ctl block */
u32 iobase3 = 0; /*Sec cmd block */
u32 iobase4 = 0; /*sec ctl block */
u32 iobase5 = 0; /*BMDMA*/
int
pci_sata_init (void)
{
u32 bus = PCI_SATA_BUS;
u32 dev = PCI_SATA_DEV;
u32 fun = PCI_SATA_FUNC;
u16 cmd = 0;
u8 lat = 0, pcibios_max_latency = 0xff;
u8 pmr; /*Port mapping reg */
u8 pi; /*Prgming Interface reg */
bdf = PCI_BDF (bus, dev, fun);
pci_read_config_dword (bdf, PCI_SATA_BASE1, &iobase1);
pci_read_config_dword (bdf, PCI_SATA_BASE2, &iobase2);
pci_read_config_dword (bdf, PCI_SATA_BASE3, &iobase3);
pci_read_config_dword (bdf, PCI_SATA_BASE4, &iobase4);
pci_read_config_dword (bdf, PCI_SATA_BASE5, &iobase5);
if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) ||
(iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) ||
(iobase5 == 0xFFFFFFFF)) {
printf ("error no base addr for SATA controller\n");
return 1;
/*ERROR*/}
iobase1 &= 0xFFFFFFFE;
iobase2 &= 0xFFFFFFFE;
iobase3 &= 0xFFFFFFFE;
iobase4 &= 0xFFFFFFFE;
iobase5 &= 0xFFFFFFFE;
/*check for mode */
pci_read_config_byte (bdf, PCI_PMR, &pmr);
if (pmr > 1) {
printf ("combined mode not supported\n");
return 1;
}
pci_read_config_byte (bdf, PCI_PI, &pi);
if ((pi & 0x05) != 0x05) {
printf ("Sata is in Legacy mode\n");
return 1;
} else {
printf ("sata is in Native mode\n");
}
/*MASTER CFG AND IO CFG */
pci_read_config_word (bdf, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_word (bdf, PCI_COMMAND, cmd);
pci_read_config_byte (dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
pci_write_config_byte (dev, PCI_LATENCY_TIMER, lat);
return 0;
}
int
sata_bus_probe (int port_no)
{
int orig_mask, mask;
u16 pcs;
mask = (PORT_PRESENT << port_no);
pci_read_config_word (bdf, PCI_PCS, &pcs);
orig_mask = (int) pcs & 0xff;
if ((orig_mask & mask) != mask)
return 0;
else
return 1;
}
int
init_sata (void)
{
u8 i, rv = 0;
for (i = 0; i < CFG_SATA_MAXDEVICES; i++) {
sata_dev_desc[i].type = DEV_TYPE_UNKNOWN;
sata_dev_desc[i].if_type = IF_TYPE_IDE;
sata_dev_desc[i].dev = i;
sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
sata_dev_desc[i].blksz = 0;
sata_dev_desc[i].lba = 0;
sata_dev_desc[i].block_read = sata_read;
}
rv = pci_sata_init ();
if (rv == 1) {
printf ("pci initialization failed\n");
return 1;
}
port[0].port_no = 0;
port[0].ioaddr.cmd_addr = iobase1;
port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
iobase2 | ATA_PCI_CTL_OFS;
port[0].ioaddr.bmdma_addr = iobase5;
port[1].port_no = 1;
port[1].ioaddr.cmd_addr = iobase3;
port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
iobase4 | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
for (i = 0; i < CFG_SATA_MAXBUS; i++)
sata_port (&port[i].ioaddr);
for (i = 0; i < CFG_SATA_MAXBUS; i++) {
if (!(sata_bus_probe (i))) {
port[i].port_state = 0;
printf ("SATA#%d port is not present \n", i);
} else {
printf ("SATA#%d port is present\n", i);
if (sata_bus_softreset (i)) {
port[i].port_state = 0;
} else {
port[i].port_state = 1;
}
}
}
for (i = 0; i < CFG_SATA_MAXBUS; i++) {
u8 j, devno;
if (port[i].port_state == 0)
continue;
for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
sata_identify (i, j);
set_Feature_cmd (i, j);
devno = i * CFG_SATA_DEVS_PER_BUS + j;
if ((sata_dev_desc[devno].lba > 0) &&
(sata_dev_desc[devno].blksz > 0)) {
dev_print (&sata_dev_desc[devno]);
/* initialize partition type */
init_part (&sata_dev_desc[devno]);
if (curr_dev < 0)
curr_dev =
i * CFG_SATA_DEVS_PER_BUS + j;
}
}
}
return 0;
}
#endif