Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 14:14:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/sun50i-a64-pinephone.dtsi
Andre Przywara fbe127f7b5 sunxi: DT: A64: Update devicetree files from Linux 5.12 
Import updated devicetree files from the Linux v5.12 release.

Besides some node and audio port renames this changes the PHY modes to
either rgmii-id or rgmii-txid. From the board files the Pinephone sees
a lot of updates.

This also adds the long missing USB PHY property for controller 0, which
allows the U-Boot PHY driver to eventually use port 0 in host mode
(pending another U-Boot patch).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
2021-04-28 10:05:12 +02:00

489 lines
9.4 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
#include "sun50i-a64.dtsi"
#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
aliases {
ethernet0 = &rtl8723cs;
serial0 = &uart0;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
power-supply = <&reg_ps>;
/* Backlight configuration differs per PinePhone revision. */
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
};
led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
};
led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
};
};
reg_ps: ps-regulator {
compatible = "regulator-fixed";
regulator-name = "ps";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
reg_vbat_wifi: vbat-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vbat-wifi";
};
sgm3140: led-controller {
compatible = "sgmicro,sgm3140";
vin-supply = <&reg_dcdc1>;
sgm3140_flash: led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
flash-max-timeout-us = <250000>;
};
};
speaker_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
sound-name-prefix = "Speaker Amp";
};
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
vcc-supply = <&reg_dcdc1>;
};
};
&codec {
status = "okay";
};
&codec_analog {
cpvdd-supply = <&reg_eldo1>;
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&cpu1 {
cpu-supply = <&reg_dcdc2>;
};
&cpu2 {
cpu-supply = <&reg_dcdc2>;
};
&cpu3 {
cpu-supply = <&reg_dcdc2>;
};
&dai {
status = "okay";
};
&de {
status = "okay";
};
&dphy {
status = "okay";
};
&dsi {
vcc-dsi-supply = <&reg_dldo1>;
status = "okay";
panel@0 {
compatible = "xingbangda,xbd599";
reg = <0>;
reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
iovcc-supply = <&reg_dldo2>;
vcc-supply = <&reg_ldo_io0>;
backlight = <&backlight>;
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&i2c0 {
status = "okay";
touchscreen@5d {
compatible = "goodix,gt917s";
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
AVDD28-supply = <&reg_ldo_io0>;
VDDIO-supply = <&reg_ldo_io0>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
};
};
&i2c1 {
status = "okay";
/* Magnetometer */
lis3mdl: magnetometer@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
};
/* Light/proximity sensor */
light-sensor@48 {
compatible = "sensortek,stk3311";
reg = <0x48>;
interrupt-parent = <&pio>;
interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
};
/* Accelerometer/gyroscope */
accelerometer@68 {
compatible = "invensense,mpu6050";
reg = <0x68>;
interrupt-parent = <&pio>;
interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
};
};
/* Connected to pogo pins (external spring based pinheader for user addons) */
&i2c2 {
status = "okay";
};
&lradc {
vref-supply = <&reg_aldo3>;
wakeup-source;
status = "okay";
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vbat_wifi>;
vqmmc-supply = <&reg_dldo4>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8723cs: wifi@1 {
reg = <1>;
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
vcc-pb-supply = <&reg_dcdc1>;
vcc-pc-supply = <&reg_dcdc1>;
vcc-pd-supply = <&reg_dcdc1>;
vcc-pe-supply = <&reg_aldo1>;
vcc-pf-supply = <&reg_dcdc1>;
vcc-pg-supply = <&reg_dldo4>;
vcc-ph-supply = <&reg_dcdc1>;
};
&r_pio {
/*
* FIXME: We can't add that supply for now since it would
* create a circular dependency between pinctrl, the regulator
* and the RSB Bus.
*
* vcc-pl-supply = <&reg_aldo2>;
*/
};
&r_pwm {
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&battery_power_supply {
status = "okay";
};
&reg_aldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dovdd-csi";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-dsi-sensor";
};
&reg_dldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-mipi-io";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-lpddr";
};
&reg_eldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-1v8-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_ldo_io0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-lcd-ctp-stk";
status = "okay";
};
&reg_ldo_io1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-1v8-typec";
status = "okay";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&sound {
status = "okay";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
"Headphone", "Headphone Jack",
"Speaker", "Internal Earpiece",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
"Headphone Jack", "HP",
"Internal Earpiece", "EARPIECE",
"Internal Speaker", "Speaker Amp OUTL",
"Internal Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
"Left DAC", "DACL",
"Right DAC", "DACR",
"ADCL", "Left ADC",
"ADCR", "Right ADC",
"Internal Microphone", "MBIAS",
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
bluetooth {
compatible = "realtek,rtl8723cs-bt";
device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
};
};
/* Connected to the modem (hardware flow control can't be used) */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
status = "okay";
};
Reference in a new issue View git blame Copy permalink