u-boot/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
Ying-Chun Liu (PaulLiu) 8350211af4 arm: dts: add imx8mm-cl-iot-gate dts file
Add board dts for imx8mm-cl-iot-gate

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02 12:46:54 +02:00

255 lines
3.4 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
*/
/ {
binman: binman {
multiple-images;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
u-boot,dm-spl;
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
};
&{/soc@0} {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
&clk {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
/delete-property/ assigned-clocks;
/delete-property/ assigned-clock-parents;
/delete-property/ assigned-clock-rates;
};
&osc_24m {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&aips1 {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&aips2 {
u-boot,dm-spl;
};
&aips3 {
u-boot,dm-spl;
};
&iomuxc {
u-boot,dm-spl;
};
&pinctrl_uart3 {
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
u-boot,dm-spl;
};
&pinctrl_usdhc2 {
u-boot,dm-spl;
};
&pinctrl_usdhc3 {
u-boot,dm-spl;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&uart3 {
u-boot,dm-spl;
};
&usdhc1 {
u-boot,dm-spl;
};
&usdhc2 {
u-boot,dm-spl;
};
&usdhc3 {
u-boot,dm-spl;
};
&i2c1 {
u-boot,dm-spl;
};
&i2c2 {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
u-boot,dm-spl;
};
&pinctrl_i2c2 {
u-boot,dm-spl;
};
&pinctrl_pmic {
u-boot,dm-spl;
};
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
&wdog1 {
u-boot,dm-spl;
};
&binman {
u-boot-spl-ddr {
filename = "u-boot-spl-ddr.bin";
pad-byte = <0xff>;
align-size = <4>;
align = <4>;
u-boot-spl {
align-end = <4>;
};
blob_1: blob-ext@1 {
filename = "lpddr4_pmu_train_1d_imem.bin";
size = <0x8000>;
};
blob_2: blob-ext@2 {
filename = "lpddr4_pmu_train_1d_dmem.bin";
size = <0x4000>;
};
blob_3: blob-ext@3 {
filename = "lpddr4_pmu_train_2d_imem.bin";
size = <0x8000>;
};
blob_4: blob-ext@4 {
filename = "lpddr4_pmu_train_2d_dmem.bin";
size = <0x4000>;
};
};
flash {
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
blob {
filename = "u-boot-spl-ddr.bin";
};
};
};
itb {
filename = "u-boot.itb";
fit {
description = "Configuration to load ATF before U-Boot";
#address-cells = <1>;
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
images {
uboot {
description = "U-Boot (64-bit)";
type = "standalone";
arch = "arm64";
compression = "none";
load = <CONFIG_SYS_TEXT_BASE>;
uboot_blob: blob-ext {
filename = "u-boot-nodtb.bin";
};
};
atf {
description = "ARM Trusted Firmware";
type = "firmware";
arch = "arm64";
compression = "none";
load = <0x920000>;
entry = <0x920000>;
atf_blob: blob-ext {
filename = "bl31.bin";
};
};
fip {
description = "Trusted Firmware FIP";
type = "firmware";
arch = "arm64";
compression = "none";
load = <0x40310000>;
fip_blob: blob-ext{
filename = "fip.bin";
};
};
fdt {
description = "NAME";
type = "flat_dt";
compression = "none";
uboot_fdt_blob: blob-ext {
filename = "u-boot.dtb";
};
};
};
configurations {
default = "conf";
conf {
description = "NAME";
firmware = "uboot";
loadables = "atf", "fip";
fdt = "fdt";
};
};
};
};
};