u-boot/board/nvidia/venice2/as3722_init.h
Peter Chubb b615267633 ARM: tegra: Add support for TK1-SOM board from Colorado Engineering
The Colorado TK1 SOM is a small form factor board similar to the
Jetson TK1.  The main differences lie in the pinmux, and in that the
PCIe controller is set to use in 4lanes+1lane, rather than 2+2.

The pinmux header here was generated from a spreadsheet provided by
Colorado Engineering using the tegra-pinmux scripts.  The spreadsheet
was converted from v09 to v11 by me.

Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-09-01 09:24:30 -07:00

44 lines
1.4 KiB
C

/*
* (C) Copyright 2013
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* AS3722-PMIC-specific early init regs */
#define AS3722_I2C_ADDR 0x80
#define AS3722_SD0VOLTAGE_REG 0x00 /* CPU */
#define AS3722_SD1VOLTAGE_REG 0x01 /* CORE, already set by OTP */
#define AS3722_SD6VOLTAGE_REG 0x06 /* GPU */
#define AS3722_SDCONTROL_REG 0x4D
#define AS3722_LDO2VOLTAGE_REG 0x12 /* VPP_FUSE */
#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
#define AS3722_LDCONTROL_REG 0x4E
#if defined(CONFIG_TARGET_VENICE2)
#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
#else /* TK1 or Nyan-Big */
#define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
#endif
#define AS3722_SD0CONTROL_DATA (0x0100 | AS3722_SDCONTROL_REG)
#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_CEI_TK1_SOM)
#define AS3722_SD1VOLTAGE_DATA (0x2800 | AS3722_SD1VOLTAGE_REG)
#define AS3722_SD1CONTROL_DATA (0x0200 | AS3722_SDCONTROL_REG)
#endif
#define AS3722_SD6CONTROL_DATA (0x4000 | AS3722_SDCONTROL_REG)
#define AS3722_SD6VOLTAGE_DATA (0x2800 | AS3722_SD6VOLTAGE_REG)
#define AS3722_LDO2CONTROL_DATA (0x0400 | AS3722_LDCONTROL_REG)
#define AS3722_LDO2VOLTAGE_DATA (0x1000 | AS3722_LDO2VOLTAGE_REG)
#define AS3722_LDO6CONTROL_DATA (0x4000 | AS3722_LDCONTROL_REG)
#define AS3722_LDO6VOLTAGE_DATA (0x3F00 | AS3722_LDO6VOLTAGE_REG)
#define I2C_SEND_2_BYTES 0x0A02
void pmic_enable_cpu_vdd(void);