mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
8ccfbfb3e1
Based on Linux commit 1dfac31a5a63ac04a9b5fbc3f5105a586560f191 This commit improves the ->setup_data_interface() hook. The denali_setup_data_interface() needs the frequency of clk_x and the ratio of clk_x / clk. The latter is currently hardcoded in the driver, like this: #define DENALI_CLK_X_MULT 6 The IP datasheet requires that clk_x / clk be 4, 5, or 6. I just chose 6 because it is the most defensive value, but it is not optimal. By getting the clock rate of both "clk" and "clk_x", the driver can compute the timing values more precisely. To not break the existing platforms, the fallback value, 50 MHz is provided. It is true for all upstreamed platforms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
326 lines
10 KiB
C
326 lines
10 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013-2014 Altera Corporation <www.altera.com>
|
|
* Copyright (C) 2009-2010, Intel Corporation and its suppliers.
|
|
*/
|
|
|
|
#ifndef __DENALI_H__
|
|
#define __DENALI_H__
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/types.h>
|
|
|
|
#define DEVICE_RESET 0x0
|
|
#define DEVICE_RESET__BANK(bank) BIT(bank)
|
|
|
|
#define TRANSFER_SPARE_REG 0x10
|
|
#define TRANSFER_SPARE_REG__FLAG BIT(0)
|
|
|
|
#define LOAD_WAIT_CNT 0x20
|
|
#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0)
|
|
|
|
#define PROGRAM_WAIT_CNT 0x30
|
|
#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0)
|
|
|
|
#define ERASE_WAIT_CNT 0x40
|
|
#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0)
|
|
|
|
#define INT_MON_CYCCNT 0x50
|
|
#define INT_MON_CYCCNT__VALUE GENMASK(15, 0)
|
|
|
|
#define RB_PIN_ENABLED 0x60
|
|
#define RB_PIN_ENABLED__BANK(bank) BIT(bank)
|
|
|
|
#define MULTIPLANE_OPERATION 0x70
|
|
#define MULTIPLANE_OPERATION__FLAG BIT(0)
|
|
|
|
#define MULTIPLANE_READ_ENABLE 0x80
|
|
#define MULTIPLANE_READ_ENABLE__FLAG BIT(0)
|
|
|
|
#define COPYBACK_DISABLE 0x90
|
|
#define COPYBACK_DISABLE__FLAG BIT(0)
|
|
|
|
#define CACHE_WRITE_ENABLE 0xa0
|
|
#define CACHE_WRITE_ENABLE__FLAG BIT(0)
|
|
|
|
#define CACHE_READ_ENABLE 0xb0
|
|
#define CACHE_READ_ENABLE__FLAG BIT(0)
|
|
|
|
#define PREFETCH_MODE 0xc0
|
|
#define PREFETCH_MODE__PREFETCH_EN BIT(0)
|
|
#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4)
|
|
|
|
#define CHIP_ENABLE_DONT_CARE 0xd0
|
|
#define CHIP_EN_DONT_CARE__FLAG BIT(0)
|
|
|
|
#define ECC_ENABLE 0xe0
|
|
#define ECC_ENABLE__FLAG BIT(0)
|
|
|
|
#define GLOBAL_INT_ENABLE 0xf0
|
|
#define GLOBAL_INT_EN_FLAG BIT(0)
|
|
|
|
#define TWHR2_AND_WE_2_RE 0x100
|
|
#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0)
|
|
#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8)
|
|
|
|
#define TCWAW_AND_ADDR_2_DATA 0x110
|
|
/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */
|
|
#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0)
|
|
#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8)
|
|
|
|
#define RE_2_WE 0x120
|
|
#define RE_2_WE__VALUE GENMASK(5, 0)
|
|
|
|
#define ACC_CLKS 0x130
|
|
#define ACC_CLKS__VALUE GENMASK(3, 0)
|
|
|
|
#define NUMBER_OF_PLANES 0x140
|
|
#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0)
|
|
|
|
#define PAGES_PER_BLOCK 0x150
|
|
#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0)
|
|
|
|
#define DEVICE_WIDTH 0x160
|
|
#define DEVICE_WIDTH__VALUE GENMASK(1, 0)
|
|
|
|
#define DEVICE_MAIN_AREA_SIZE 0x170
|
|
#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0)
|
|
|
|
#define DEVICE_SPARE_AREA_SIZE 0x180
|
|
#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0)
|
|
|
|
#define TWO_ROW_ADDR_CYCLES 0x190
|
|
#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0)
|
|
|
|
#define MULTIPLANE_ADDR_RESTRICT 0x1a0
|
|
#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0)
|
|
|
|
#define ECC_CORRECTION 0x1b0
|
|
#define ECC_CORRECTION__VALUE GENMASK(4, 0)
|
|
#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
|
|
|
|
#define READ_MODE 0x1c0
|
|
#define READ_MODE__VALUE GENMASK(3, 0)
|
|
|
|
#define WRITE_MODE 0x1d0
|
|
#define WRITE_MODE__VALUE GENMASK(3, 0)
|
|
|
|
#define COPYBACK_MODE 0x1e0
|
|
#define COPYBACK_MODE__VALUE GENMASK(3, 0)
|
|
|
|
#define RDWR_EN_LO_CNT 0x1f0
|
|
#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0)
|
|
|
|
#define RDWR_EN_HI_CNT 0x200
|
|
#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0)
|
|
|
|
#define MAX_RD_DELAY 0x210
|
|
#define MAX_RD_DELAY__VALUE GENMASK(3, 0)
|
|
|
|
#define CS_SETUP_CNT 0x220
|
|
#define CS_SETUP_CNT__VALUE GENMASK(4, 0)
|
|
#define CS_SETUP_CNT__TWB GENMASK(17, 12)
|
|
|
|
#define SPARE_AREA_SKIP_BYTES 0x230
|
|
#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0)
|
|
|
|
#define SPARE_AREA_MARKER 0x240
|
|
#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0)
|
|
|
|
#define DEVICES_CONNECTED 0x250
|
|
#define DEVICES_CONNECTED__VALUE GENMASK(2, 0)
|
|
|
|
#define DIE_MASK 0x260
|
|
#define DIE_MASK__VALUE GENMASK(7, 0)
|
|
|
|
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
|
|
#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0)
|
|
|
|
#define WRITE_PROTECT 0x280
|
|
#define WRITE_PROTECT__FLAG BIT(0)
|
|
|
|
#define RE_2_RE 0x290
|
|
#define RE_2_RE__VALUE GENMASK(5, 0)
|
|
|
|
#define MANUFACTURER_ID 0x300
|
|
#define MANUFACTURER_ID__VALUE GENMASK(7, 0)
|
|
|
|
#define DEVICE_ID 0x310
|
|
#define DEVICE_ID__VALUE GENMASK(7, 0)
|
|
|
|
#define DEVICE_PARAM_0 0x320
|
|
#define DEVICE_PARAM_0__VALUE GENMASK(7, 0)
|
|
|
|
#define DEVICE_PARAM_1 0x330
|
|
#define DEVICE_PARAM_1__VALUE GENMASK(7, 0)
|
|
|
|
#define DEVICE_PARAM_2 0x340
|
|
#define DEVICE_PARAM_2__VALUE GENMASK(7, 0)
|
|
|
|
#define LOGICAL_PAGE_DATA_SIZE 0x350
|
|
#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0)
|
|
|
|
#define LOGICAL_PAGE_SPARE_SIZE 0x360
|
|
#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0)
|
|
|
|
#define REVISION 0x370
|
|
#define REVISION__VALUE GENMASK(15, 0)
|
|
|
|
#define ONFI_DEVICE_FEATURES 0x380
|
|
#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0)
|
|
|
|
#define ONFI_OPTIONAL_COMMANDS 0x390
|
|
#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0)
|
|
|
|
#define ONFI_TIMING_MODE 0x3a0
|
|
#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0)
|
|
|
|
#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
|
|
#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0)
|
|
|
|
#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
|
|
#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0)
|
|
#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8)
|
|
|
|
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
|
|
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0)
|
|
|
|
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
|
|
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0)
|
|
|
|
#define FEATURES 0x3f0
|
|
#define FEATURES__N_BANKS GENMASK(1, 0)
|
|
#define FEATURES__ECC_MAX_ERR GENMASK(5, 2)
|
|
#define FEATURES__DMA BIT(6)
|
|
#define FEATURES__CMD_DMA BIT(7)
|
|
#define FEATURES__PARTITION BIT(8)
|
|
#define FEATURES__XDMA_SIDEBAND BIT(9)
|
|
#define FEATURES__GPREG BIT(10)
|
|
#define FEATURES__INDEX_ADDR BIT(11)
|
|
|
|
#define TRANSFER_MODE 0x400
|
|
#define TRANSFER_MODE__VALUE GENMASK(1, 0)
|
|
|
|
#define INTR_STATUS(bank) (0x410 + (bank) * 0x50)
|
|
#define INTR_EN(bank) (0x420 + (bank) * 0x50)
|
|
/* bit[1:0] is used differently depending on IP version */
|
|
#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */
|
|
#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */
|
|
#define INTR__ECC_ERR BIT(1) /* old IP */
|
|
#define INTR__DMA_CMD_COMP BIT(2)
|
|
#define INTR__TIME_OUT BIT(3)
|
|
#define INTR__PROGRAM_FAIL BIT(4)
|
|
#define INTR__ERASE_FAIL BIT(5)
|
|
#define INTR__LOAD_COMP BIT(6)
|
|
#define INTR__PROGRAM_COMP BIT(7)
|
|
#define INTR__ERASE_COMP BIT(8)
|
|
#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9)
|
|
#define INTR__LOCKED_BLK BIT(10)
|
|
#define INTR__UNSUP_CMD BIT(11)
|
|
#define INTR__INT_ACT BIT(12)
|
|
#define INTR__RST_COMP BIT(13)
|
|
#define INTR__PIPE_CMD_ERR BIT(14)
|
|
#define INTR__PAGE_XFER_INC BIT(15)
|
|
#define INTR__ERASED_PAGE BIT(16)
|
|
|
|
#define PAGE_CNT(bank) (0x430 + (bank) * 0x50)
|
|
#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50)
|
|
#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50)
|
|
|
|
#define ECC_THRESHOLD 0x600
|
|
#define ECC_THRESHOLD__VALUE GENMASK(9, 0)
|
|
|
|
#define ECC_ERROR_BLOCK_ADDRESS 0x610
|
|
#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0)
|
|
|
|
#define ECC_ERROR_PAGE_ADDRESS 0x620
|
|
#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0)
|
|
#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12)
|
|
|
|
#define ECC_ERROR_ADDRESS 0x630
|
|
#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
|
|
#define ECC_ERROR_ADDRESS__SECTOR GENMASK(15, 12)
|
|
|
|
#define ERR_CORRECTION_INFO 0x640
|
|
#define ERR_CORRECTION_INFO__BYTE GENMASK(7, 0)
|
|
#define ERR_CORRECTION_INFO__DEVICE GENMASK(11, 8)
|
|
#define ERR_CORRECTION_INFO__UNCOR BIT(14)
|
|
#define ERR_CORRECTION_INFO__LAST_ERR BIT(15)
|
|
|
|
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
|
|
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
|
|
#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0)
|
|
#define ECC_COR_INFO__UNCOR_ERR BIT(7)
|
|
|
|
#define CFG_DATA_BLOCK_SIZE 0x6b0
|
|
|
|
#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0
|
|
|
|
#define CFG_NUM_DATA_BLOCKS 0x6d0
|
|
|
|
#define CFG_META_DATA_SIZE 0x6e0
|
|
|
|
#define DMA_ENABLE 0x700
|
|
#define DMA_ENABLE__FLAG BIT(0)
|
|
|
|
#define IGNORE_ECC_DONE 0x710
|
|
#define IGNORE_ECC_DONE__FLAG BIT(0)
|
|
|
|
#define DMA_INTR 0x720
|
|
#define DMA_INTR_EN 0x730
|
|
#define DMA_INTR__TARGET_ERROR BIT(0)
|
|
#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1)
|
|
#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2)
|
|
#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3)
|
|
#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4)
|
|
#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5)
|
|
|
|
#define TARGET_ERR_ADDR_LO 0x740
|
|
#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0)
|
|
|
|
#define TARGET_ERR_ADDR_HI 0x750
|
|
#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0)
|
|
|
|
#define CHNL_ACTIVE 0x760
|
|
#define CHNL_ACTIVE__CHANNEL0 BIT(0)
|
|
#define CHNL_ACTIVE__CHANNEL1 BIT(1)
|
|
#define CHNL_ACTIVE__CHANNEL2 BIT(2)
|
|
#define CHNL_ACTIVE__CHANNEL3 BIT(3)
|
|
|
|
struct udevice;
|
|
|
|
struct denali_nand_info {
|
|
struct nand_chip nand;
|
|
unsigned long clk_rate; /* core clock rate */
|
|
unsigned long clk_x_rate; /* bus interface clock rate */
|
|
int active_bank; /* currently selected bank */
|
|
struct udevice *dev;
|
|
uint32_t page;
|
|
void __iomem *reg; /* Register Interface */
|
|
void __iomem *host; /* Host Data/Command Interface */
|
|
u32 irq_mask; /* interrupts we are waiting for */
|
|
u32 irq_status; /* interrupts that have happened */
|
|
int irq;
|
|
void *buf; /* for syndrome layout conversion */
|
|
dma_addr_t dma_addr;
|
|
int dma_avail; /* can support DMA? */
|
|
int devs_per_cs; /* devices connected in parallel */
|
|
int oob_skip_bytes; /* number of bytes reserved for BBM */
|
|
int max_banks;
|
|
unsigned int revision; /* IP revision */
|
|
unsigned int caps; /* IP capability (or quirk) */
|
|
const struct nand_ecc_caps *ecc_caps;
|
|
u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
|
|
void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
|
|
void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
|
|
int page, int write);
|
|
};
|
|
|
|
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
|
|
#define DENALI_CAP_DMA_64BIT BIT(1)
|
|
|
|
int denali_calc_ecc_bytes(int step_size, int strength);
|
|
int denali_init(struct denali_nand_info *denali);
|
|
|
|
#endif /* __DENALI_H__ */
|