mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
ed57c40783
Add support for the M.2 board based on the iot2050 advanced board. The board has two m.2 connectors, one is B-keyed, the other E-keyed. The B-key slot can connect 5G/SSD devices, and E-key can be used for WIFI/BT devices. This variant is covered by PG2 firmware image. Signed-off-by: chao zeng <chao.zeng@siemens.com> [Jan: align DT to kernel, polish wording] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
121 lines
3.1 KiB
Text
121 lines
3.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) Siemens AG, 2018-2023
|
|
*
|
|
* Authors:
|
|
* Chao Zeng <chao.zeng@siemens.com>
|
|
* Jan Kiszka <jan.kiszka@siemens.com>
|
|
*
|
|
* AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product
|
|
* Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
|
|
*
|
|
* Product homepage:
|
|
* https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
|
|
*/
|
|
|
|
#include "k3-am6548-iot2050-advanced-common.dtsi"
|
|
#include "k3-am65-iot2050-common-pg2.dtsi"
|
|
|
|
/ {
|
|
compatible = "siemens,iot2050-advanced-m2", "ti,am654";
|
|
model = "SIMATIC IOT2050 Advanced M2";
|
|
};
|
|
|
|
&mcu_r5fss0 {
|
|
/* lock-step mode not supported on this board */
|
|
ti,cluster-mode = <0>;
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_m2_enable_pins_default: main-m2-enable-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */
|
|
>;
|
|
};
|
|
|
|
main_bkey_pcie_reset: main-bkey-pcie-reset {
|
|
pinctrl-single,pins = <
|
|
AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */
|
|
>;
|
|
};
|
|
|
|
main_pmx0_m2_config_pins_default: main-pmx0-m2-config-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */
|
|
AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */
|
|
>;
|
|
};
|
|
|
|
main_m2_pcie_mux_control: main-m2-pcie-mux-control {
|
|
pinctrl-single,pins = <
|
|
AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */
|
|
AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */
|
|
AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7) /* (AF19) GPIO0_89 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_pmx1 {
|
|
main_pmx1_m2_config_pins_default: main-pmx1-m2-config-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */
|
|
AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_gpio0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&main_m2_pcie_mux_control
|
|
&arduino_io_d4_to_d9_pins_default
|
|
>;
|
|
};
|
|
|
|
&main_gpio1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&main_m2_enable_pins_default
|
|
&main_pmx0_m2_config_pins_default
|
|
&main_pmx1_m2_config_pins_default
|
|
&cp2102n_reset_pin_default
|
|
>;
|
|
};
|
|
|
|
/*
|
|
* Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only.
|
|
* Firmware switches to other modes via device tree overlays.
|
|
*/
|
|
|
|
&serdes0 {
|
|
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
|
|
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
|
|
};
|
|
|
|
&pcie0_rc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_bkey_pcie_reset>;
|
|
|
|
num-lanes = <2>;
|
|
phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
|
|
phy-names = "pcie-phy0","pcie-phy1";
|
|
reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1_rc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dwc3_0 {
|
|
assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
|
|
<&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
|
|
/delete-property/ phys;
|
|
/delete-property/ phy-names;
|
|
};
|
|
|
|
&usb0 {
|
|
maximum-speed = "high-speed";
|
|
/delete-property/ snps,dis-u1-entry-quirk;
|
|
/delete-property/ snps,dis-u2-entry-quirk;
|
|
};
|