Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-23 11:33:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/sun50i-a64-pinephone.dtsi
Samuel Holland 7710282334 ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1 
Copy the devicetree source for the A64 SoC and all existing boards
from the Linux v5.18-rc1 tag.

To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.

This update should not impact any existing U-Boot functionality.

Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-05-23 00:37:51 +01:00

516 lines
10 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
#include "sun50i-a64.dtsi"
#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
chassis-type = "handset";
aliases {
ethernet0 = &rtl8723cs;
serial0 = &uart0;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
power-supply = <&reg_ps>;
/* Backlight configuration differs per PinePhone revision. */
};
bt_sco_codec: bt-sco-codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
};
led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
};
led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
};
};
reg_ps: ps-regulator {
compatible = "regulator-fixed";
regulator-name = "ps";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
reg_vbat_wifi: vbat-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vbat-wifi";
};
sgm3140: led-controller {
compatible = "sgmicro,sgm3140";
vin-supply = <&reg_dcdc1>;
sgm3140_flash: led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
flash-max-timeout-us = <250000>;
};
};
speaker_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
sound-name-prefix = "Speaker Amp";
};
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
vcc-supply = <&reg_dcdc1>;
};
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&aif3_pins>;
status = "okay";
};
&codec_analog {
cpvdd-supply = <&reg_eldo1>;
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&cpu1 {
cpu-supply = <&reg_dcdc2>;
};
&cpu2 {
cpu-supply = <&reg_dcdc2>;
};
&cpu3 {
cpu-supply = <&reg_dcdc2>;
};
&dai {
status = "okay";
};
&de {
status = "okay";
};
&dphy {
status = "okay";
};
&dsi {
vcc-dsi-supply = <&reg_dldo1>;
status = "okay";
panel@0 {
compatible = "xingbangda,xbd599";
reg = <0>;
reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
iovcc-supply = <&reg_dldo2>;
vcc-supply = <&reg_ldo_io0>;
backlight = <&backlight>;
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&i2c0 {
status = "okay";
touchscreen@5d {
compatible = "goodix,gt917s";
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
AVDD28-supply = <&reg_ldo_io0>;
VDDIO-supply = <&reg_ldo_io0>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
};
};
&i2c1 {
status = "okay";
/* Magnetometer */
lis3mdl: magnetometer@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
};
/* Light/proximity sensor */
light-sensor@48 {
compatible = "sensortek,stk3311";
reg = <0x48>;
interrupt-parent = <&pio>;
interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
};
/* Accelerometer/gyroscope */
accelerometer@68 {
compatible = "invensense,mpu6050";
reg = <0x68>;
interrupt-parent = <&pio>;
interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
};
};
/* Connected to pogo pins (external spring based pinheader for user addons) */
&i2c2 {
status = "okay";
};
&lradc {
vref-supply = <&reg_aldo3>;
wakeup-source;
status = "okay";
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vbat_wifi>;
vqmmc-supply = <&reg_dldo4>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8723cs: wifi@1 {
reg = <1>;
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
vcc-pb-supply = <&reg_dcdc1>;
vcc-pc-supply = <&reg_dcdc1>;
vcc-pd-supply = <&reg_dcdc1>;
vcc-pe-supply = <&reg_aldo1>;
vcc-pf-supply = <&reg_dcdc1>;
vcc-pg-supply = <&reg_dldo4>;
vcc-ph-supply = <&reg_dcdc1>;
};
&r_pio {
/*
* FIXME: We can't add that supply for now since it would
* create a circular dependency between pinctrl, the regulator
* and the RSB Bus.
*
* vcc-pl-supply = <&reg_aldo2>;
*/
};
&r_pwm {
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&battery_power_supply {
status = "okay";
};
&reg_aldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dovdd-csi";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-dsi-sensor";
};
&reg_dldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-mipi-io";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-lpddr";
};
&reg_eldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-1v8-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_ldo_io0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-lcd-ctp-stk";
status = "okay";
};
&reg_ldo_io1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-1v8-typec";
status = "okay";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&sound {
status = "okay";
simple-audio-card,name = "PinePhone";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
"Headphone", "Headphone Jack",
"Speaker", "Internal Earpiece",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
"Headphone Jack", "HP",
"Internal Earpiece", "EARPIECE",
"Internal Speaker", "Speaker Amp OUTL",
"Internal Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
"Left DAC", "DACL",
"Right DAC", "DACR",
"ADCL", "Left ADC",
"ADCR", "Right ADC",
"Internal Microphone", "MBIAS",
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
simple-audio-card,dai-link@2 {
format = "dsp_a";
frame-master = <&link2_codec>;
bitclock-master = <&link2_codec>;
bitclock-inversion;
link2_cpu: cpu {
sound-dai = <&bt_sco_codec 0>;
};
link2_codec: codec {
sound-dai = <&codec 2>;
dai-tdm-slot-num = <1>;
dai-tdm-slot-width = <32>;
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
bluetooth {
compatible = "realtek,rtl8723cs-bt";
device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
};
};
/* Connected to the modem (hardware flow control can't be used) */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
status = "okay";
};
Reference in a new issue View git blame Copy permalink