mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
885198536d
AM62A7-SK board has 4GB LPDDR4 Micron MT53E2G32D4DE-046 AUT:B part but only 2GB was enabled early. Enable full 4GB memory by updating the latter 2GB memory region which gets mapped to 0x0880000000 i.e. DDR16SS0_SDRAM as referred in Table 2-1. AM62A Common SoC Memory of AM62Ax TRM [1]. [1] : https://www.ti.com/lit/zip/spruj16 Logs: https://gist.github.com/devarsht/e85b6af89c01ddadb3a62f3e5f196af8 Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
224 lines
5.2 KiB
Text
224 lines
5.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AM62A SK: https://www.ti.com/lit/zip/sprr459
|
|
*
|
|
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "k3-am62a7.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,am62a7-sk", "ti,am62a7";
|
|
model = "Texas Instruments AM62A7 SK";
|
|
|
|
aliases {
|
|
serial2 = &main_uart0;
|
|
mmc1 = &sdhci1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
/* 4G RAM */
|
|
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
|
|
<0x00000008 0x80000000 0x00000000 0x80000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
secure_tfa_ddr: tfa@9e780000 {
|
|
reg = <0x00 0x9e780000 0x00 0x80000>;
|
|
alignment = <0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
secure_ddr: optee@9e800000 {
|
|
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
|
|
alignment = <0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x00 0x9c900000 0x00 0x01e00000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
vmain_pd: regulator-0 {
|
|
/* TPS25750 PD CONTROLLER OUTPUT */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmain_pd";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_5v0: regulator-1 {
|
|
/* Output of TPS63070 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vmain_pd>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_3v3_sys: regulator-2 {
|
|
/* output of LM5141-Q1 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_sys";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vmain_pd>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: regulator-3 {
|
|
/* TPS22918DBVR */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usr_led_pins_default>;
|
|
|
|
led-0 {
|
|
label = "am62a-sk:green:heartbeat";
|
|
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_uart0_pins_default: main-uart0-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
|
|
AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
|
|
>;
|
|
};
|
|
|
|
main_i2c0_pins_default: main-i2c0-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
|
|
AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c1_pins_default: main-i2c1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
|
|
AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c2_pins_default: main-i2c2-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
|
|
AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
|
|
AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
|
|
AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
|
|
AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
|
|
AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
|
|
AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
|
|
AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
|
|
>;
|
|
};
|
|
|
|
usr_led_pins_default: usr-led-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c0_pins_default>;
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&main_i2c1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c1_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp1: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
|
|
"BT_EN_SOC", "MMC1_SD_EN",
|
|
"VPP_EN", "EXP_PS_3V3_En",
|
|
"EXP_PS_5V0_En", "EXP_HAT_DETECT",
|
|
"GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
|
|
"UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
|
|
"GPIO_HDMI_RSTn", "CSI_GPIO0",
|
|
"CSI_GPIO1", "WLAN_ALERTn",
|
|
"HDMI_INTn", "TEST_GPIO2",
|
|
"MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
|
|
"MCASP1_FET_SEL", "UART1_FET_SEL",
|
|
"PD_I2C_IRQ", "IO_EXP_TEST_LED";
|
|
};
|
|
};
|
|
|
|
&sdhci1 {
|
|
/* SD/MMC */
|
|
status = "okay";
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&main_gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&main_gpio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&main_gpio_intr {
|
|
status = "okay";
|
|
};
|
|
|
|
&main_uart0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart0_pins_default>;
|
|
};
|