mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
94c30f9c8f
As explained in commit 3bedbcc3aa ("arm: mvebu: a38x: serdes: Don't
overwrite read-only SAR PCIe registers") it is required to set Maximum Link
Width bits of PCIe Root Port Link Capabilities Register depending of number
of used serdes lanes. As this register is part of PCIe address space and
not serdes address space, move it into pci_mvebu.c driver.
Read number of PCIe lanes from DT property "num-lanes" which is used also
by other PCIe controller drivers in Linux kernel. If this property is
absent then it defaults to 1. This property needs to be set to 4 for every
mvebu board which use PEX_ROOT_COMPLEX_X4 or PEX_BUS_MODE_X4.
Enabling of PCIe port needs to be done afer all registers in PCIe address
space are properly configure. For this purpose use new mvebu-reset driver
(part of system-controller) and remove this code from serdes code.
Because some PCIe ports cannot be enabled individually, it is required to
first setup all PCIe ports and then enable them.
This change contains also all required "num-lanes" and "resets" DTS
properties, to make pci_mvebu.c driver work correctly.
Signed-off-by: Pali Rohár <pali@kernel.org>
345 lines
7.3 KiB
Text
345 lines
7.3 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell 98dx3236 family SoC
|
|
*
|
|
* Copyright (C) 2016 Allied Telesis Labs
|
|
*
|
|
* Contains definitions specific to the 98dx3236 SoC that are not
|
|
* common to all Armada XP SoCs.
|
|
*/
|
|
|
|
#include "armada-370-xp.dtsi"
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
model = "Marvell 98DX3236 SoC";
|
|
compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,98dx3236-smp";
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "marvell,sheeva-v7";
|
|
reg = <0>;
|
|
clocks = <&cpuclk 0>;
|
|
clock-latency = <1000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "marvell,armadaxp-mbus", "simple-bus";
|
|
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
|
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
|
|
MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
|
|
MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
|
|
};
|
|
|
|
/*
|
|
* 98DX3236 has 1 x1 PCIe unit Gen2.0
|
|
*/
|
|
pciec: pcie@82000000 {
|
|
compatible = "marvell,armada-xp-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&mpic>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
|
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
|
|
|
|
pcie1: pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &mpic 58>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 5>;
|
|
resets = <&systemc 0 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
sdramc: sdramc@1400 {
|
|
compatible = "marvell,armada-xp-sdram-controller";
|
|
reg = <0x1400 0x500>;
|
|
};
|
|
|
|
L2: l2-cache@8000 {
|
|
compatible = "marvell,aurora-system-cache";
|
|
reg = <0x08000 0x1000>;
|
|
cache-id-part = <0x100>;
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
wt-override;
|
|
};
|
|
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18100 0x40>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <82>, <83>, <84>, <85>;
|
|
};
|
|
|
|
/* does not exist */
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18140 0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio2: gpio@18180 { /* rework some properties */
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18180 0x40>;
|
|
ngpios = <1>; /* only gpio #32 */
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <87>;
|
|
};
|
|
|
|
systemc: system-controller@18200 {
|
|
compatible = "marvell,armada-370-xp-system-controller";
|
|
reg = <0x18200 0x500>;
|
|
#reset-cells = <2>;
|
|
};
|
|
|
|
gateclk: clock-gating-control@18220 {
|
|
compatible = "marvell,mv98dx3236-gating-clock";
|
|
reg = <0x18220 0x4>;
|
|
clocks = <&coreclk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
cpuclk: clock-complex@18700 {
|
|
#clock-cells = <1>;
|
|
compatible = "marvell,mv98dx3236-cpu-clock";
|
|
reg = <0x18700 0x24>, <0x1c054 0x10>;
|
|
clocks = <&coreclk 1>;
|
|
};
|
|
|
|
corediv-clock@18740 {
|
|
status = "disabled";
|
|
};
|
|
|
|
cpu-config@21000 {
|
|
compatible = "marvell,armada-xp-cpu-config";
|
|
reg = <0x21000 0x8>;
|
|
};
|
|
|
|
ethernet@70000 {
|
|
compatible = "marvell,armada-xp-neta";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
compatible = "marvell,armada-xp-neta";
|
|
};
|
|
|
|
xor1: xor@f0800 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0xf0800 0x100
|
|
0xf0a00 0x100>;
|
|
clocks = <&gateclk 22>;
|
|
status = "okay";
|
|
|
|
xor10 {
|
|
interrupts = <51>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor11 {
|
|
interrupts = <52>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
nand_controller: nand@d0000 {
|
|
clocks = <&dfx_coredivclk 0>;
|
|
};
|
|
|
|
xor0: xor@f0900 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0xF0900 0x100
|
|
0xF0B00 0x100>;
|
|
clocks = <&gateclk 28>;
|
|
status = "okay";
|
|
|
|
xor00 {
|
|
interrupts = <94>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <95>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
};
|
|
|
|
dfx: dfx-server@ac000000 {
|
|
compatible = "marvell,dfx-server", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
|
|
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
|
|
|
|
thermal: thermal@f8078 {
|
|
compatible = "marvell,armada380-thermal";
|
|
reg = <0xf8078 0x4>, <0xf8074 0x4>;
|
|
status = "okay";
|
|
};
|
|
|
|
coreclk: mvebu-sar@f8204 {
|
|
compatible = "marvell,mv98dx3236-core-clock";
|
|
reg = <0xf8204 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
dfx_coredivclk: corediv-clock@f8268 {
|
|
compatible = "marvell,mv98dx3236-corediv-clock";
|
|
reg = <0xf8268 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
};
|
|
|
|
switch: switch@a8000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
|
|
|
|
pp0: packet-processor@0 {
|
|
compatible = "marvell,prestera-98dx3236", "marvell,prestera";
|
|
reg = <0 0x4000000>;
|
|
interrupts = <33>, <34>, <35>;
|
|
dfx = <&dfx>;
|
|
};
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
/* 25 MHz reference crystal */
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x100>;
|
|
};
|
|
|
|
&i2c1 {
|
|
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
|
reg = <0x11100 0x100>;
|
|
};
|
|
|
|
&mpic {
|
|
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
|
};
|
|
|
|
&rtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&timer {
|
|
compatible = "marvell,armada-xp-timer";
|
|
clocks = <&coreclk 2>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
&watchdog {
|
|
compatible = "marvell,armada-xp-wdt";
|
|
clocks = <&coreclk 2>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
&cpurst {
|
|
reg = <0x20800 0x20>;
|
|
};
|
|
|
|
&usb0 {
|
|
clocks = <&gateclk 18>;
|
|
};
|
|
|
|
&usb1 {
|
|
clocks = <&gateclk 19>;
|
|
};
|
|
|
|
&pinctrl {
|
|
compatible = "marvell,98dx3236-pinctrl";
|
|
|
|
nand_pins: nand-pins {
|
|
marvell,pins = "mpp20", "mpp21", "mpp22",
|
|
"mpp23", "mpp24", "mpp25",
|
|
"mpp26", "mpp27", "mpp28",
|
|
"mpp29", "mpp30";
|
|
marvell,function = "dev";
|
|
};
|
|
|
|
nand_rb: nand-rb {
|
|
marvell,pins = "mpp19";
|
|
marvell,function = "nand";
|
|
};
|
|
|
|
spi0_pins: spi0-pins {
|
|
marvell,pins = "mpp0", "mpp1",
|
|
"mpp2", "mpp3";
|
|
marvell,function = "spi0";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&sdio {
|
|
status = "disabled";
|
|
};
|