u-boot/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
Wenyou Yang eced5a7eb4 ARM: cpu: at91: clean up peripheral clock code
Due to introducing the new peripheral clock handle functions,
use these functions to clean up the duplicated code.

Meanwhile, remove unneeded header file include, at91_pmc.h.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixup for arm920t code]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-18 21:34:40 +01:00

126 lines
3.2 KiB
C

/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
/*
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
* peripheral pins. Good to have if hardware is soldered optionally
* or in case of SPI no slave is selected. Avoid lines to float
* needlessly. Use a short local PUP define.
*
* Due to errata "TXD floats when CTS is inactive" pullups are always
* on for TXD pins.
*/
#ifdef CONFIG_AT91_GPIO_PULLUP
# define PUP CONFIG_AT91_GPIO_PULLUP
#else
# define PUP 0
#endif
void at91_serial0_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */
at91_periph_clk_enable(ATMEL_ID_USART0);
}
void at91_serial1_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
void at91_serial2_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */
at91_periph_clk_enable(ATMEL_ID_USART2);
}
void at91_seriald_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
at91_periph_clk_enable(ATMEL_ID_SYS);
}
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI0);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_a_periph(AT91_PIO_PORTA, 4, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_a_periph(AT91_PIO_PORTA, 5, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_a_periph(AT91_PIO_PORTA, 6, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTA, 6, 1);
}
}
void at91_spi1_hw_init(unsigned long cs_mask)
{
at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI1);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 28, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTA, 24, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_b_periph(AT91_PIO_PORTA, 25, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_a_periph(AT91_PIO_PORTA, 26, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 28, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTA, 24, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTA, 25, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTA, 26, 1);
}
}
#endif