mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
024333c96f
The code assumes the phy address to be > 0, which is not true, the phy address can be in the range 0-31. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
540 lines
13 KiB
C
540 lines
13 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* Designware ethernet IP driver for u-boot
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <miiphy.h>
|
|
#include <malloc.h>
|
|
#include <linux/err.h>
|
|
#include <asm/io.h>
|
|
#include "designware.h"
|
|
|
|
static void tx_descs_init(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_dma_regs *dma_p = priv->dma_regs_p;
|
|
struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
|
|
char *txbuffs = &priv->txbuffs[0];
|
|
struct dmamacdescr *desc_p;
|
|
u32 idx;
|
|
|
|
for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
|
|
desc_p = &desc_table_p[idx];
|
|
desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
|
|
desc_p->dmamac_next = &desc_table_p[idx + 1];
|
|
|
|
#if defined(CONFIG_DW_ALTDESCRIPTOR)
|
|
desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
|
|
DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
|
|
DESC_TXSTS_TXCHECKINSCTRL | \
|
|
DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
|
|
|
|
desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
|
|
desc_p->dmamac_cntl = 0;
|
|
desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
|
|
#else
|
|
desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
|
|
desc_p->txrx_status = 0;
|
|
#endif
|
|
}
|
|
|
|
/* Correcting the last pointer of the chain */
|
|
desc_p->dmamac_next = &desc_table_p[0];
|
|
|
|
writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
|
|
}
|
|
|
|
static void rx_descs_init(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_dma_regs *dma_p = priv->dma_regs_p;
|
|
struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
|
|
char *rxbuffs = &priv->rxbuffs[0];
|
|
struct dmamacdescr *desc_p;
|
|
u32 idx;
|
|
|
|
for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
|
|
desc_p = &desc_table_p[idx];
|
|
desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
|
|
desc_p->dmamac_next = &desc_table_p[idx + 1];
|
|
|
|
desc_p->dmamac_cntl =
|
|
(MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
|
|
DESC_RXCTRL_RXCHAIN;
|
|
|
|
desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
|
|
}
|
|
|
|
/* Correcting the last pointer of the chain */
|
|
desc_p->dmamac_next = &desc_table_p[0];
|
|
|
|
writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
|
|
}
|
|
|
|
static void descs_init(struct eth_device *dev)
|
|
{
|
|
tx_descs_init(dev);
|
|
rx_descs_init(dev);
|
|
}
|
|
|
|
static int mac_reset(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_mac_regs *mac_p = priv->mac_regs_p;
|
|
struct eth_dma_regs *dma_p = priv->dma_regs_p;
|
|
|
|
int timeout = CONFIG_MACRESET_TIMEOUT;
|
|
|
|
writel(DMAMAC_SRST, &dma_p->busmode);
|
|
writel(MII_PORTSELECT, &mac_p->conf);
|
|
|
|
do {
|
|
if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
|
|
return 0;
|
|
udelay(1000);
|
|
} while (timeout--);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int dw_write_hwaddr(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_mac_regs *mac_p = priv->mac_regs_p;
|
|
u32 macid_lo, macid_hi;
|
|
u8 *mac_id = &dev->enetaddr[0];
|
|
|
|
macid_lo = mac_id[0] + (mac_id[1] << 8) + \
|
|
(mac_id[2] << 16) + (mac_id[3] << 24);
|
|
macid_hi = mac_id[4] + (mac_id[5] << 8);
|
|
|
|
writel(macid_hi, &mac_p->macaddr0hi);
|
|
writel(macid_lo, &mac_p->macaddr0lo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_eth_init(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_mac_regs *mac_p = priv->mac_regs_p;
|
|
struct eth_dma_regs *dma_p = priv->dma_regs_p;
|
|
u32 conf;
|
|
|
|
/* Reset ethernet hardware */
|
|
if (mac_reset(dev) < 0)
|
|
return -1;
|
|
|
|
/* Resore the HW MAC address as it has been lost during MAC reset */
|
|
dw_write_hwaddr(dev);
|
|
|
|
writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
|
|
&dma_p->busmode);
|
|
|
|
writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
|
|
writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
|
|
|
|
conf = FRAMEBURSTENABLE | DISABLERXOWN;
|
|
|
|
if (priv->speed != SPEED_1000M)
|
|
conf |= MII_PORTSELECT;
|
|
|
|
if (priv->duplex == FULL_DUPLEX)
|
|
conf |= FULLDPLXMODE;
|
|
|
|
writel(conf, &mac_p->conf);
|
|
|
|
descs_init(dev);
|
|
|
|
/*
|
|
* Start/Enable xfer at dma as well as mac level
|
|
*/
|
|
writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
|
|
writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
|
|
|
|
writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
|
|
writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_eth_send(struct eth_device *dev, volatile void *packet,
|
|
int length)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_dma_regs *dma_p = priv->dma_regs_p;
|
|
u32 desc_num = priv->tx_currdescnum;
|
|
struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
|
|
|
|
/* Check if the descriptor is owned by CPU */
|
|
if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
|
|
printf("CPU not owner of tx frame\n");
|
|
return -1;
|
|
}
|
|
|
|
memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
|
|
|
|
#if defined(CONFIG_DW_ALTDESCRIPTOR)
|
|
desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
|
|
desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
|
|
DESC_TXCTRL_SIZE1MASK;
|
|
|
|
desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
|
|
desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
|
|
#else
|
|
desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
|
|
DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
|
|
DESC_TXCTRL_TXFIRST;
|
|
|
|
desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
|
|
#endif
|
|
|
|
/* Test the wrap-around condition. */
|
|
if (++desc_num >= CONFIG_TX_DESCR_NUM)
|
|
desc_num = 0;
|
|
|
|
priv->tx_currdescnum = desc_num;
|
|
|
|
/* Start the transmission */
|
|
writel(POLL_DATA, &dma_p->txpolldemand);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_eth_recv(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
u32 desc_num = priv->rx_currdescnum;
|
|
struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
|
|
|
|
u32 status = desc_p->txrx_status;
|
|
int length = 0;
|
|
|
|
/* Check if the owner is the CPU */
|
|
if (!(status & DESC_RXSTS_OWNBYDMA)) {
|
|
|
|
length = (status & DESC_RXSTS_FRMLENMSK) >> \
|
|
DESC_RXSTS_FRMLENSHFT;
|
|
|
|
NetReceive(desc_p->dmamac_addr, length);
|
|
|
|
/*
|
|
* Make the current descriptor valid again and go to
|
|
* the next one
|
|
*/
|
|
desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
|
|
|
|
/* Test the wrap-around condition. */
|
|
if (++desc_num >= CONFIG_RX_DESCR_NUM)
|
|
desc_num = 0;
|
|
}
|
|
|
|
priv->rx_currdescnum = desc_num;
|
|
|
|
return length;
|
|
}
|
|
|
|
static void dw_eth_halt(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
|
|
mac_reset(dev);
|
|
priv->tx_currdescnum = priv->rx_currdescnum = 0;
|
|
}
|
|
|
|
static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_mac_regs *mac_p = priv->mac_regs_p;
|
|
u32 miiaddr;
|
|
int timeout = CONFIG_MDIO_TIMEOUT;
|
|
|
|
miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
|
|
((reg << MIIREGSHIFT) & MII_REGMSK);
|
|
|
|
writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
|
|
|
|
do {
|
|
if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
|
|
*val = readl(&mac_p->miidata);
|
|
return 0;
|
|
}
|
|
udelay(1000);
|
|
} while (timeout--);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
struct eth_mac_regs *mac_p = priv->mac_regs_p;
|
|
u32 miiaddr;
|
|
int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
|
|
u16 value;
|
|
|
|
writel(val, &mac_p->miidata);
|
|
miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
|
|
((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
|
|
|
|
writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
|
|
|
|
do {
|
|
if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(1000);
|
|
} while (timeout--);
|
|
|
|
/* Needed as a fix for ST-Phy */
|
|
eth_mdio_read(dev, addr, reg, &value);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_DW_SEARCH_PHY)
|
|
static int find_phy(struct eth_device *dev)
|
|
{
|
|
int phy_addr = 0;
|
|
u16 ctrl, oldctrl;
|
|
|
|
do {
|
|
eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
|
|
oldctrl = ctrl & BMCR_ANENABLE;
|
|
|
|
ctrl ^= BMCR_ANENABLE;
|
|
eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
|
|
eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
|
|
ctrl &= BMCR_ANENABLE;
|
|
|
|
if (ctrl == oldctrl) {
|
|
phy_addr++;
|
|
} else {
|
|
ctrl ^= BMCR_ANENABLE;
|
|
eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
|
|
|
|
return phy_addr;
|
|
}
|
|
} while (phy_addr < 32);
|
|
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
static int dw_reset_phy(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
u16 ctrl;
|
|
int timeout = CONFIG_PHYRESET_TIMEOUT;
|
|
u32 phy_addr = priv->address;
|
|
|
|
eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
|
|
do {
|
|
eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
|
|
if (!(ctrl & BMCR_RESET))
|
|
break;
|
|
udelay(1000);
|
|
} while (timeout--);
|
|
|
|
if (timeout < 0)
|
|
return -1;
|
|
|
|
#ifdef CONFIG_PHY_RESET_DELAY
|
|
udelay(CONFIG_PHY_RESET_DELAY);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int configure_phy(struct eth_device *dev)
|
|
{
|
|
struct dw_eth_dev *priv = dev->priv;
|
|
int phy_addr;
|
|
u16 bmcr;
|
|
#if defined(CONFIG_DW_AUTONEG)
|
|
u16 bmsr;
|
|
u32 timeout;
|
|
u16 anlpar, btsr;
|
|
#else
|
|
u16 ctrl;
|
|
#endif
|
|
|
|
#if defined(CONFIG_DW_SEARCH_PHY)
|
|
phy_addr = find_phy(dev);
|
|
if (phy_addr >= 0)
|
|
priv->address = phy_addr;
|
|
else
|
|
return -1;
|
|
#else
|
|
phy_addr = priv->address;
|
|
#endif
|
|
if (dw_reset_phy(dev) < 0)
|
|
return -1;
|
|
|
|
#if defined(CONFIG_DW_AUTONEG)
|
|
bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
|
|
BMCR_FULLDPLX | BMCR_SPEED1000;
|
|
#else
|
|
bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
|
|
|
|
#if defined(CONFIG_DW_SPEED10M)
|
|
bmcr &= ~BMCR_SPEED100;
|
|
#endif
|
|
#if defined(CONFIG_DW_DUPLEXHALF)
|
|
bmcr &= ~BMCR_FULLDPLX;
|
|
#endif
|
|
#endif
|
|
if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
|
|
return -1;
|
|
|
|
/* Read the phy status register and populate priv structure */
|
|
#if defined(CONFIG_DW_AUTONEG)
|
|
timeout = CONFIG_AUTONEG_TIMEOUT;
|
|
do {
|
|
eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
|
|
if (bmsr & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(1000);
|
|
} while (timeout--);
|
|
|
|
eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
|
|
eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
|
|
|
|
if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
|
|
priv->speed = SPEED_1000M;
|
|
if (btsr & PHY_1000BTSR_1000FD)
|
|
priv->duplex = FULL_DUPLEX;
|
|
else
|
|
priv->duplex = HALF_DUPLEX;
|
|
} else {
|
|
if (anlpar & LPA_100)
|
|
priv->speed = SPEED_100M;
|
|
else
|
|
priv->speed = SPEED_10M;
|
|
|
|
if (anlpar & (LPA_10FULL | LPA_100FULL))
|
|
priv->duplex = FULL_DUPLEX;
|
|
else
|
|
priv->duplex = HALF_DUPLEX;
|
|
}
|
|
#else
|
|
if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
|
|
return -1;
|
|
|
|
if (ctrl & BMCR_FULLDPLX)
|
|
priv->duplex = FULL_DUPLEX;
|
|
else
|
|
priv->duplex = HALF_DUPLEX;
|
|
|
|
if (ctrl & BMCR_SPEED1000)
|
|
priv->speed = SPEED_1000M;
|
|
else if (ctrl & BMCR_SPEED100)
|
|
priv->speed = SPEED_100M;
|
|
else
|
|
priv->speed = SPEED_10M;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_MII)
|
|
static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val)
|
|
{
|
|
struct eth_device *dev;
|
|
|
|
dev = eth_get_dev_by_name(devname);
|
|
if (dev)
|
|
eth_mdio_read(dev, addr, reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val)
|
|
{
|
|
struct eth_device *dev;
|
|
|
|
dev = eth_get_dev_by_name(devname);
|
|
if (dev)
|
|
eth_mdio_write(dev, addr, reg, val);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
|
|
{
|
|
struct eth_device *dev;
|
|
struct dw_eth_dev *priv;
|
|
|
|
dev = (struct eth_device *) malloc(sizeof(struct eth_device));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Since the priv structure contains the descriptors which need a strict
|
|
* buswidth alignment, memalign is used to allocate memory
|
|
*/
|
|
priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
|
|
if (!priv) {
|
|
free(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
memset(priv, 0, sizeof(struct dw_eth_dev));
|
|
|
|
sprintf(dev->name, "mii%d", id);
|
|
dev->iobase = (int)base_addr;
|
|
dev->priv = priv;
|
|
|
|
eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
|
|
|
|
priv->dev = dev;
|
|
priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
|
|
priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
|
|
DW_DMA_BASE_OFFSET);
|
|
priv->address = phy_addr;
|
|
|
|
if (mac_reset(dev) < 0)
|
|
return -1;
|
|
|
|
if (configure_phy(dev) < 0) {
|
|
printf("Phy could not be configured\n");
|
|
return -1;
|
|
}
|
|
|
|
dev->init = dw_eth_init;
|
|
dev->send = dw_eth_send;
|
|
dev->recv = dw_eth_recv;
|
|
dev->halt = dw_eth_halt;
|
|
dev->write_hwaddr = dw_write_hwaddr;
|
|
|
|
eth_register(dev);
|
|
|
|
#if defined(CONFIG_MII)
|
|
miiphy_register(dev->name, dw_mii_read, dw_mii_write);
|
|
#endif
|
|
return 1;
|
|
}
|