u-boot/drivers/power/axp818.c
Samuel Holland 425084610e sunxi: Clean up inclusions of asm/arch/gpio.h
As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will
remove the asm/arch/gpio.h header. In preparation, clean up the various
files that include it.

Some files did not contain any GPIO code at all, so this header was
completely unused.

A few files contained only legacy platform-specific GPIO code for
setting up pin muxes. They were left unchanged, as that code will be
completely removed by the DM_PINCTRL migration.

The remaining files contain some combination of DM_GPIO and legacy GPIO
code. For those, switch to including asm/gpio.h (if it wasn't included
already). Right now, this header provides both sets of functions,
because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the
right header to include once the DM_GPIO migration is complete and
GPIO_EXTRA_HEADER is no longer needed.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00

267 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* AXP818 driver based on AXP221 driver
*
*
* (C) Copyright 2015 Vishnu Patekar <vishnuptekar0510@gmail.com>
*
* Based on axp221.c
* (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
*/
#include <common.h>
#include <command.h>
#include <errno.h>
#include <asm/arch/pmic_bus.h>
#include <axp_pmic.h>
static u8 axp818_mvolt_to_cfg(int mvolt, int min, int max, int div)
{
if (mvolt < min)
mvolt = min;
else if (mvolt > max)
mvolt = max;
return (mvolt - min) / div;
}
int axp_set_dcdc1(unsigned int mvolt)
{
int ret;
u8 cfg = axp818_mvolt_to_cfg(mvolt, 1600, 3400, 100);
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC1_EN);
ret = pmic_bus_write(AXP818_DCDC1_CTRL, cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC1_EN);
}
int axp_set_dcdc2(unsigned int mvolt)
{
int ret;
u8 cfg;
if (mvolt >= 1220)
cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
else
cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC2_EN);
ret = pmic_bus_write(AXP818_DCDC2_CTRL, cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC2_EN);
}
int axp_set_dcdc3(unsigned int mvolt)
{
int ret;
u8 cfg;
if (mvolt >= 1220)
cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
else
cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC3_EN);
ret = pmic_bus_write(AXP818_DCDC3_CTRL, cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC3_EN);
}
int axp_set_dcdc5(unsigned int mvolt)
{
int ret;
u8 cfg;
if (mvolt >= 1140)
cfg = 32 + axp818_mvolt_to_cfg(mvolt, 1140, 1840, 20);
else
cfg = axp818_mvolt_to_cfg(mvolt, 800, 1120, 10);
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC5_EN);
ret = pmic_bus_write(AXP818_DCDC5_CTRL, cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
AXP818_OUTPUT_CTRL1_DCDC5_EN);
}
int axp_set_aldo(int aldo_num, unsigned int mvolt)
{
int ret;
u8 cfg;
if (aldo_num < 1 || aldo_num > 3)
return -EINVAL;
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_ALDO1_EN << (aldo_num - 1));
cfg = axp818_mvolt_to_cfg(mvolt, 700, 3300, 100);
ret = pmic_bus_write(AXP818_ALDO1_CTRL + (aldo_num - 1), cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_ALDO1_EN << (aldo_num - 1));
}
/* TODO: re-work other AXP drivers to consolidate ALDO functions. */
int axp_set_aldo1(unsigned int mvolt)
{
return axp_set_aldo(1, mvolt);
}
int axp_set_aldo2(unsigned int mvolt)
{
return axp_set_aldo(2, mvolt);
}
int axp_set_aldo3(unsigned int mvolt)
{
return axp_set_aldo(3, mvolt);
}
int axp_set_dldo(int dldo_num, unsigned int mvolt)
{
int ret;
u8 cfg;
if (dldo_num < 1 || dldo_num > 4)
return -EINVAL;
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
cfg = axp818_mvolt_to_cfg(mvolt, 700, 3300, 100);
if (dldo_num == 2 && mvolt > 3300)
cfg += 1 + axp818_mvolt_to_cfg(mvolt, 3400, 4200, 200);
ret = pmic_bus_write(AXP818_DLDO1_CTRL + (dldo_num - 1), cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
}
int axp_set_eldo(int eldo_num, unsigned int mvolt)
{
int ret;
u8 cfg;
if (eldo_num < 1 || eldo_num > 3)
return -EINVAL;
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
cfg = axp818_mvolt_to_cfg(mvolt, 700, 1900, 50);
ret = pmic_bus_write(AXP818_ELDO1_CTRL + (eldo_num - 1), cfg);
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
}
int axp_set_fldo(int fldo_num, unsigned int mvolt)
{
int ret;
u8 cfg;
if (fldo_num < 1 || fldo_num > 3)
return -EINVAL;
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
if (fldo_num < 3) {
cfg = axp818_mvolt_to_cfg(mvolt, 700, 1450, 50);
ret = pmic_bus_write(AXP818_FLDO1_CTRL + (fldo_num - 1), cfg);
} else {
/*
* Special case for FLDO3, which is DCDC5 / 2 or FLDOIN / 2
* Since FLDOIN is unknown, test against DCDC5.
*/
if (mvolt * 2 == CONFIG_AXP_DCDC5_VOLT)
ret = pmic_bus_clrbits(AXP818_FLDO2_3_CTRL,
AXP818_FLDO2_3_CTRL_FLDO3_VOL);
else
ret = pmic_bus_setbits(AXP818_FLDO2_3_CTRL,
AXP818_FLDO2_3_CTRL_FLDO3_VOL);
}
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
}
int axp_set_sw(bool on)
{
if (on)
return pmic_bus_setbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_SW_EN);
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL2,
AXP818_OUTPUT_CTRL2_SW_EN);
}
int axp_init(void)
{
u8 axp_chip_id;
int ret;
ret = pmic_bus_init();
if (ret)
return ret;
ret = pmic_bus_read(AXP818_CHIP_ID, &axp_chip_id);
if (ret)
return ret;
if (!(axp_chip_id == 0x51))
return -ENODEV;
else
return ret;
return 0;
}
int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
pmic_bus_write(AXP818_SHUTDOWN, AXP818_SHUTDOWN_POWEROFF);
/* infinite loop during shutdown */
while (1) {}
/* not reached */
return 0;
}