u-boot/configs/zynq_cse_qspi_defconfig
Vignesh R 6d82517836 configs: Don't use SPI_FLASH_BAR as default
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07 15:33:22 +05:30

66 lines
1.8 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_cse"
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0xFFFC0000
CONFIG_ENV_SIZE=0x190
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0x0
CONFIG_DEBUG_UART_CLOCK=0
CONFIG_SPL_STACK_R_ADDR=0x200000
# CONFIG_ZYNQ_DDRC_INIT is not set
CONFIG_SYS_MALLOC_LEN=0x1000
# CONFIG_CMD_ZYNQ is not set
CONFIG_DEBUG_UART=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
# CONFIG_BOARD_LATE_INIT is not set
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_ARCH_EARLY_INIT_R is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_SYS_LONGHELP is not set
CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_AUTOBOOT is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_SPL is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_CLK is not set
# CONFIG_CMD_DM is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MISC is not set
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-qspi-single"
# CONFIG_NET is not set
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DEBUG_UART_ARM_DCC=y
CONFIG_ZYNQ_QSPI=y
# CONFIG_EFI_LOADER is not set